BS EN 16282-2:2016
Current
The latest, up-to-date edition.
Equipment for commercial kitchens. Components for ventilation in commercial kitchens Kitchen ventilation hoods; design and safety requirements
Hardcopy , PDF
English
28-02-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
RHE/2
|
| DevelopmentNote |
Supersedes 14/30303744 DC. (02/2017)
|
| DocumentType |
Standard
|
| Pages |
22
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This European Standard specifies requirements for the design, construction and operation of kitchen ventilation hoods, including technical safety, ergonomic and hygienic features. This European Standard is applicable to ventilation systems in commercial kitchens, associated areas and other installations processing foodstuffs intended for commercial use. Kitchens and associated areas are special rooms in which meals are prepared, where tableware and equipment is washed, cleaned, food is stored and food waste areas. This European Standard is applicable to ventilation hoods except those used in domestic kitchens. A method of verification of each requirement is also specified. Unless otherwise specified, the requirements of this standard need to be checked by way of inspection and/or measurement. NOTE Please note the possible existence of additional or alternative local national regulations on installation, appliance requirements and inspection, maintenance and operation.
| Standards | Relationship |
| EN 16282-2:2016 | Identical |
| EN 294:1992/AC:1993 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS |
| EN ISO 7250-1:2017 | Basic human body measurements for technological design - Part 1: Body measurement definitions and landmarks (ISO 7250-1:2017) |
| EN 1825-2:2002 | Grease separators - Part 2: Selection of nominal size, installation, operation and maintenance |
| EN 894-3:2000+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators |
| EN 12464-1:2011 | Light and lighting - Lighting of work places - Part 1: Indoor work places |
| ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
| PREN 16282-5 : DRAFT 2014 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT; DESIGN AND DIMENSIONING |
| EN 547-2:1996+A1:2008 | Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings |
| EN 50274 : 2002 COR 2009 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PROTECTION AGAINST ELECTRIC SHOCK - PROTECTION AGAINST UNINTENTIONAL DIRECT CONTACT WITH HAZARDOUS LIVE PARTS |
| PREN 16282-8 : DRAFT 2014 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION - PART 8: INSTALLATIONS FOR TREATMENT OF COOKING FUMES; REQUIREMENTS AND TESTING |
| EN ISO 4288:1997 | Geometrical product specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996) |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN 547-1:1996+A1:2008 | Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery |
| EN 1717:2000 | Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow |
| PREN 16282-6 : DRAFT 2014 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 6: AEROSOL SEPARATORS; DESIGN AND SAFETY REQUIREMENTS |
| EN ISO 9612:2009 | Acoustics - Determination of occupational noise exposure - Engineering method (ISO 9612:2009) |
| EN ISO 13565-2:1997 | Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve (ISO 13565-2:1996) |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| ISO 3274:1996 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments |
| EN 547-3:1996+A1:2008 | Safety of machinery - Human body measurements - Part 3: Anthropometric data |
| EN ISO 12100:2010 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
| EN ISO 13565-1:1997 | Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions (ISO 13565-1:1996) |
| PREN 16282-1 : DRAFT 2014 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 1: GENERAL REQUIREMENTS INCLUDING CALCULATION METHOD |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| EN 50310:2016 | Telecommunications bonding networks for buildings and other structures |
| EN 573-3:2013 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
| EN ISO 3274:1997 | Geometrical product specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (ISO 3274:1996) |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.