BS EN 1999-1-4 : 2007
Current
The latest, up-to-date edition.
EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING
Hardcopy , PDF
English
01-01-2007
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
National Annex for EN 1999-1-4
1 General
2 Basis of design
3 Materials
4 Durability
5 Structural analysis
6 Ultimate limit states
7 Serviceability limit states
8 Joints with mechanical fasteners
9 Design assisted by testing
Annex A [normative] - Testing procedures
Annex B [informative] - Durability of fasteners
Bibliograph
Provides design requirements for cold-formed trapezoidal aluminium sheeting.
| Committee |
B/525/9
|
| DevelopmentNote |
National Annex of this document is also available. See BS EN 1999-1-4 NA. (01/2009) Supersedes BS 8118-1(1991). (04/2010) Also available as part of BS KIT 213. (08/2010) 2007 Edition Re-Issued in November 2011 & incorporates AMD 1 2011. Supersedes 10/30233283 DC. (11/2011)
|
| DocumentType |
Standard
|
| Pages |
68
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN EN 1999-1-4 : 2011 | Identical |
| I.S. EN 1999-1-4:2007 | Identical |
| NF EN 1999-1-4 : 2007 AMD 1 2011 | Identical |
| UNI EN 1999-1-4 : 2011 | Identical |
| NS EN 1999-1-4 : 2007 AMD 1 2011 | Identical |
| NBN EN 1999-1-4 : 2007 AMD 1 2011 | Identical |
| SN EN 1999-1-4 : 2007 AMD 1 2011 | Identical |
| BS 6037-1:2017 | Planning, design, installation and use of permanently installed access equipment. Code of practice Suspended access equipment |
| 17/30342093 DC : 0 | BS 6037-1 - PLANNING, DESIGN, INSTALLATION AND USE OF PERMANENTLY INSTALLED ACCESS EQUIPMENT - CODE OF PRACTICE - PART 1: SUSPENDED ACCESS EQUIPMENT |
| PD 6702-1:2009 | Structural use of aluminium Recommendations for the design of aluminium structures to BS EN 1999 |
| BS EN 1999-1-4 NA : 2007 | UK NATIONAL ANNEX TO EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING |
| EN ISO 1479:2011 | Hexagon head tapping screws (ISO 1479:2011) |
| EN ISO 15981:2002 | Open end blind rivets with break pull mandrel and protruding head - AIA/AIA (ISO 15981:2002) |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN ISO 15481:1999 | Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999) |
| EN ISO 15977:2002 | Open end blind rivets with break pull mandrel and protruding head - AIA/St (ISO 15977:2002) |
| EN ISO 1481:2011 | Slotted pan head tapping screws (ISO 1481:2011) |
| EN 485-2:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties |
| ISO 7049:2011 | Cross-recessed pan head tapping screws |
| EN 508-2:2008 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium |
| EN 1396:2015 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| EN 1090-3:2008 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| EN 1090-1:2009+A1:2011 | Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components |
| DIN 18807-3:1987-06 | TRAPEZOIDAL SHEETING IN BUILDING - STEEL TRAPEZOIDAL SHEETING - STRENGTH ANALYSIS, STRUCTURAL DESIGN |
| EN ISO 15974:2000 | Closed end blind rivets with break pull mandrel and countersunk head - AIA/St (ISO 15974:2000) |
| DIN 18807-1 : 1987 AMD 1 2001 | TRAPEZOIDAL SHEETING IN BUILDING - TRAPEZOIDAL STEEL SHEETING - GENERAL REQUIREMENTS AND DETERMINATION OF LOADBEARING CAPACITY BY CALCULATION |
| EN ISO 15982:2002 | Open end blind rivets with break pull mandrel and countersunk head - AIA/AIA (ISO 15982:2002) |
| EN ISO 15480:1999 | Hexagon washer head drilling screws with tapping screw thread (ISO 15480:1999) |
| EN ISO 15973:2000 | Closed end blind rivets with break pull mandrel and protruding head - AIA/St (ISO 15973:2000) |
| EN ISO 15978:2002 | Open end blind rivets with break pull mandrel and countersunk head - AIA/St (ISO 15978:2002) |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.