BS EN 22553:1995
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Welded, brazed and soldered joints. Symbolic representation on drawings
Hardcopy , PDF
31-12-2013
English
15-05-1995
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Committees responsible
National foreword
Foreword
1 Scope
2 Normative references
3 General
4 Symbols
4.1 Elementary symbols
4.2 Combinations of elementary symbols
4.3 Supplementary symbols
5 Position of the symbols on drawings
5.1 General
5.2 Relationship between the arrow line and the joint
5.3 Position of the arrow line
5.4 Position of the reference line
5.5 Position of the symbol with regard to the reference line
6 Dimensioning of welds
6.1 General rules
6.2 Main dimensions to be shown
7 Complementary indications
7.1 Peripheral welds
7.2 Field or site welds
7.3 Indication of the welding process
7.4 Sequence of information in the tail of the reference mark
8 Examples for application of spot and seam joints
Annex A (informative) - Examples of use of symbols
Annex B (informative) - Guidance for converting drawings made in
accordance with ISO 2553:1974 into the new system in
accordance with ISO 2553:1991
Annex ZA (normative) - Normative references to international
publications with their relevant European publications
Prescribes the rules to be applied for the symbolic representation of welded, brazed and soldered joints on drawings.
| Committee |
WEE/1
|
| DevelopmentNote |
Supersedes BS 499-2C(1980) (06/2002)
|
| DocumentType |
Standard
|
| Pages |
58
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNI EN 22553 : 1997 | Identical |
| UNE-EN 22553:1995 | Identical |
| SN EN 22553 : 1994 | Identical |
| NF EN 22553 : 1994 | Identical |
| I.S. EN 22553:1994 | Identical |
| EN 22553:1994 | Identical |
| NBN EN 22553 : 1995 | Identical |
| DIN EN 22553:1997-03 | Identical |
| BS 8888:2008 | Technical product specification. Specification |
| BS 8888:2002 | Technical product documentation (TPD). Specification for defining, specifying and graphically representing products |
| BS 8888:2011 | Technical product documentation and specification |
| DEFSTAN 02-770(PT1)/3(2010) : 2010 | REQUIREMENTS FOR THE WELDING AND FABRICATION OF HIGH STRENGTH STEELS - PART 1: GENERAL |
| DEFSTAN 02-770(PT1)/2(2005) : 2005 | REQUIREMENTS FOR THE WELDING AND FABRICATION OF HIGH STRENGTH STEELS - PART 1: GENERAL |
| DEFSTAN 02-38/2(2011) : 2011 | REQUIREMENTS FOR THE PREPARATION, IDENTIFICATION AND MANAGEMENT OF DATUM PACK DRAWINGS AND PHOTOGRAPHS FOR SWIFTSURE, TRAFALGAR & VANGUARD CLASS NUCLEAR SUBMARINES |
| DEFSTAN 02-706/2(2010) : 2010 | WELDING & FABRICATION OF SHIP STRUCTURE FOR HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS |
| DEFSTAN 81-86/3(2007) : 2007 | METAL FITTINGS FOR WOODEN CONTAINERS |
| DEFSTAN 07-85(PT1)/3(2006) : 2006 | DESIGN REQUIREMENTS FOR WEAPONS AND ASSOCIATED SYSTEMS - PART 1: MANDATORY DESIGN REQUIREMENTS |
| DEFSTAN 02-772/1(2007) : 2007 | WELDING AND FABRICATION OF PIPEWORK, MACHINERY AND ENGINEERING COMPONENTS FOR HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS |
| DEFSTAN 81-86/2(2000) : 2000 CORR 2000 | METAL FITTINGS FOR WOODEN CONTAINERS |
| 13/30275718 DC : 0 | BS 8888 - TECHNICAL PRODUCT DOCUMENTATION AND SPECIFICATION |
| 08/30162761 DC : DRAFT AUG 2008 | BS 499-1 - WELDING TERMS AND SYMBOLS - PART 1: GLOSSARY FOR WELDING, BRAZING AND THERMAL CUTTING |
| PD 8888:2001 | Technical product documentation (TPD). An interim report |
| BS PD6695-2(2008) : 2008 | RECOMMENDATIONS FOR THE DESIGN OF BRIDGES TO BS EN 1993 |
| BS 5950-1:2000 | Structural use of steelwork in building Code of practice for design. Rolled and welded sections |
| 11/30234091 DC : DRAFT JULY 2011 | BS 8888 - TECHNICAL PRODUCT DOCUMENTATION AND SPECIFICATION |
| EN ISO 17660-1:2006 | Welding - Welding of reinforcing steel - Part 1: Load-bearing welded joints (ISO 17660-1:2006) |
| DEFSTAN 02-729(PT1)/2(2006) : 2006 | REQUIREMENTS FOR NON-DESTRUCTIVE EXAMINATION METHOD - PART 1: RADIOGRAPHIC |
| DEFSTAN 02-729(PT1)/3(2013) : 2013 | REQUIREMENTS FOR NON-DESTRUCTIVE EXAMINATION METHODS - PART 1: RADIOGRAPHIC |
| BS 499-1:2009 | Welding terms and symbols Glossary for welding, brazing and thermal cutting |
| ISO 17660-1:2006 | Welding — Welding of reinforcing steel — Part 1: Load-bearing welded joints |
| ISO 17660-2:2006 | Welding — Welding of reinforcing steel — Part 2: Non load-bearing welded joints |
| BS EN ISO 17660-2:2006 | Welding. Welding of reinforcing steel Non load-bearing welded joints |
| BS 8888:2004 | Technical product specification (TPS). Specification |
| EN ISO 17660-2:2006 | Welding - Welding of reinforcing steel - Part 2: Non load-bearing welded joints (ISO 17660-2:2006) |
| BS PP7321(2004) : 2004 | DESIGN AND TECHNOLOGY - COMPENDIUM OF BRITISH STANDARDS FOR TEACHERS OF DESIGN AND TECHNOLOGY IN SCHOOLS AND COLLEGES |
| BIP 3016 : 2004 | BS 8888(2004) - TECHNICAL PRODUCT SPECIFICATION CD-ROM |
| BS EN ISO 17660-1:2006 | Welding. Welding of reinforcing steel Load-bearing welded joints |
| BS 8888:2006 | Technical product specification (TPS). Specification |
| BS 8888:2013 | Technical product documentation and specification |
| ISO 3581:2016 | Welding consumables — Covered electrodes for manual metal arc welding of stainless and heat-resisting steels — Classification |
| EN 30042 : 1994 | ARC WELDED JOINTS IN ALUMINIUM AND ITS WELDABLE ALLOYS - GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS |
| ISO 10042:2005 | Welding Arc-welded joints in aluminium and its alloys Quality levels for imperfections |
| ISO 544:2011 | Welding consumables Technical delivery conditions for filler materials and fluxes Type of product, dimensions, tolerances and markings |
| BS EN 28167:1992 | Specification for projections for resistance welding |
| ISO 2560:2009 | Welding consumables Covered electrodes for manual metal arc welding of non-alloy and fine grain steels Classification |
| BS EN 20544:1991 | Specification for sizes for filler metals for manual welding |
| BS EN 30042:1994 | Arc-welded joints in aluminium and its weldable alloys. Guidance on quality levels for imperfections |
| EN 28167:1992 | Projections for resistance welding (8167:1989) |
| ISO 3098-1:2015 | Technical product documentation Lettering Part 1: General requirements |
| BS EN 25817:1992 | Arc-welded joints in steel. Guidance on quality levels for imperfections |
| ISO 5817:2014 | Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
| ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
| BS EN 24063:1992 | Welding, brazing, soldering and braze welding of metals. Nomenclature of processes and reference numbers for symbolic representation on drawings |
| EN 20544 : 1991 | SPECIFICATION FOR SIZES FOR FILLER METALS FOR MANUAL WELDING |
| ISO 8167:1989 | Projections for resistance welding |
| EN 24063 : 1992 | WELDING, BRAZING, SOLDERING AND BRAZE WELDING OF METALS - NOMENCLATURE OF PROCESSES AND REFERENCE NUMBERS FOR SYMBOLIC REPRESENTATION ON DRAWINGS |
| ISO 4063:2009 | Welding and allied processes — Nomenclature of processes and reference numbers |
| ISO 128:1982 | Technical drawings — General principles of presentation |
| EN 25817 : 1992 | ARC WELDED JOINTS IN STEEL - GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS |
| ISO 6947:2011 | Welding and allied processes Welding positions |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.