BS EN 3155-025:2006
Current
Current
The latest, up-to-date edition.
Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, triaxial, size 8, female, type D, crimp, class S. Product standard
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
31-10-2006
Publisher
€170.31
Excluding VAT
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Required characteristics
5 Designation
6 Marking
7 Technical specification
Describes the required characteristics and tests applicable to female electrical contacts, type D, crimp, class S, -65 degrees C to 200 degrees C, size 8 used in elements of connection according to EN 3155-001.
| Committee |
ACE/6
|
| DevelopmentNote |
Supersedes 94/713136 DC. (04/2011)
|
| DocumentType |
Standard
|
| Pages |
16
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NS EN 3155-025 : 1ED 2006 | Identical |
| NF EN 3155-025 : 2006 | Identical |
| DIN EN 3155-025:2007-11 | Identical |
| NEN EN 3155-025 : 2006 | Identical |
| NBN EN 3155-025 : 2006 | Identical |
| I.S. EN 3155-025:2006 | Identical |
| EN 3155-025:2006 | Identical |
| EN 2591-212:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 212: Surface transfer impedance |
| EN 2591-306:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 306: Mould growth |
| EN 2591-301:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part C1: Endurance at temperature |
| EN 2591-305:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 305: Rapid change of temperature |
| PREN 3155-024 : 200P1 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 024: CONTACTS, ELECTRICAL, TRIAXIAL, SIZE 8, MALE, TYPE D, CRIMP, CLASS S - PRODUCT STANDARD |
| SAE AMS1424M | Deicing/Anti-Icing Fluid, Aircraft SAE Type 1 |
| EN 2591-213:1997 | Aeropsace series - Elements of electrical and optical connection - Test methods - Part 213: Shielding effectiveness from 100 MHz to 1 GHz |
| EN 2591-418:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 418: Gauge insertion/extraction forces (female contacts) |
| EN 2591-502:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 502: Restricted entry |
| EN 2591-315:2015 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 315: Fluid resistance |
| MIL-PRF-7808 Revision L:1997 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base |
| MIL-PRF-5606 Revision H:2002 | Hydraulic Fluid, Petroleum Base; Aircraft, Missile, and Ordnance |
| PREN 4008-004 : DRAFT 2015 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - CRIMPING TOOLS AND ASSOCIATED ACCESSORIES - PART 004: DIE FOR CRIMPING TOOL M22520/5-01 - PRODUCT STANDARD |
| EN 2591-201:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B1: Contact resistance - Low level |
| EN 2591-101:1994 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 101: Visual examination |
| MIL-PRF-87937 Revision D:2001 | Cleaning Compound, Aerospace Equipment |
| EN 2591-417:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 417: Tensile strength (crimped connection) |
| EN 2591-102:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part A2: Examination of dimensions and mass |
| EN 2591-406:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 406: Mechanical endurance |
| PREN 3375-003 : 200P1 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 003: SINGLE BRAID - 77 OHMS - TYPE KG - PRODUCT STANDARD |
| MIL-I-81969-14 Revision C:1987 | Installing and Removal Tools, Connector Electrical Contact, Type III, Class 2, Composition B (S/S By SAE-AS81969/14) |
| EN 2591-513:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 513: Magnetic permeability |
| EN 2591-204:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B4: Discontinuity of contacts in the microsecond range |
| EN 2591-206:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B6: Measurement of insulation resistance |
| EN 2591-507:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 507: Plating porosity |
| MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
| PREN 4008-003 : DRAFT 2015 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION CRIMPING TOOLS AND ASSOCIATED ACCESSORIES - PART 003: POSITIONER FOR CRIMPING TOOL M22520/2-01 - PRODUCT STANDARD |
| EN 2591-210:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 210: Electrical overload |
| EN 2591-100:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General |
| SAE AS39029/90A | CONTACT, ELECTRICAL CONNECTOR, CONCENTRIC TWINAX, PIN, SIZE 8 |
| MIL-PRF-7870 Revision E:2015 | Lubricating Oil: General Purpose, Low Temperature (NATO O-142) |
| PREN 3155-012 : 200P2 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 012: CONTACTS, ELECTRICAL, TRIAXIAL, SIZE 8, MALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
| SAE AS1241D | Fire Resistant Phosphate Ester Hydraulic Fluid for Aircraft |
| EN 2591-402:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 402: Shock |
| EN 2591-503:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 503: Contact deformation after crimping |
| PREN 3375-004 : 0 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 004: DOUBLE BRAID - 77 OHMS - TYPE WJ - PRODUCT STANDARD |
| EN 2591-202:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B2: Contact resistance at rated current |
| EN 2591-211:2002 | Aerospaces series - Elements of electrical and optical connection - Test Methods - Part 211: Capacitance |
| EN 2591-508:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 508: Measurement of thickness of coating on contacts |
| SAE AS39029/91A | CONTACT, ELECTRICAL CONNECTOR, CONCENTRIC TWINAX, SOCKET, SHIELDED, SIZE 8 |
| EN 2591-307:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 307: Salt mist |
| EN 2591-207:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B7: Voltage proof test |
| EN 2591-416:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 416: Contact bending strength |
| EN 2591-415:2001 | Aerospace series - Elements of electrical and optical connection - Test methodsPart 415: Test probe damage (female contacts) |
| PREN 3375-005 : 200P1 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 005: DOUBLE BRAID + METALLIC LAYER - 77 OHMS - TYPE WV - PRODUCT STANDARD |
| PREN 4530-002 : 200P1 | AEROSPACE SERIES - SEALING SLEEVES USED IN ELEMENTS OF CONNECTION - PART 002: LIST AND UTILIZATION OF SEALING SLEEVES |
| PREN 3155-001 : 200P5 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION |
| EN 2591-403:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.