• There are no items in your cart

BS EN 4532:2009

Current

Current

The latest, up-to-date edition.

Aerospace series. Cables, optical, single core 200 ?m/280 ?m fibre, 2,5 mm outer jacket. Technical specification

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

31-03-2009

€156.59
Excluding VAT

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Description
   4.1 Construction of type 'A' primary fibre
        (Jacketed fibre)
   4.2 Construction of type 'B' single core cable
5 Cable characteristics
   5.1 Optical performance of cable
   5.2 Construction data of cable (Type B)
   5.3 Mechanical characteristics of cable (Type B)
6 Fibre characteristics
   6.1 Optical and material data of primary fibre
   6.2 Geometrical data of primary fibre and
   concentricity of primary coating
7 Environmental conditions
   7.1 Temperature range
   7.2 Operating pressure range
   7.3 Humidity
   7.4 Nuclear radiation
8 Production acceptance (routine) tests
   8.1 General
   8.2 Group A - Production acceptance (routine) tests
   8.3 Group B - Production verification (quality) tests
   8.4 Group D - Qualification approval tests
        (cable type 'B')
9 Additional test information
   9.1 Repeatability of test results
   9.2 Definition of full launch conditions
   9.3 Full launch techniques
   9.4 Additional requirements
   9.5 Practical realisation
   9.6 Test arrangement for low- and high- temperature
        tests
10 Marking and packaging requirements
   10.1 Designation of type 'A' primary fibre
   10.2 Designation of type 'B' cable
   10.3 Marking of cable
   10.4 Ordering information
   10.5 Cable length
   10.6 Storage reel

Defines two cable types: - Type A, jacketed fibre, is intended for printed circuit board inter-connection applications inside equipment, and - Type B, single core, is intended for general airframe and equipment inter-connection cable suitable for installation in all aircraft locations, with exception of power plant compartments.

Committee
ACE/6
DevelopmentNote
Supersedes 01/704470 DC. (03/2009)
DocumentType
Standard
Pages
20
PublisherName
British Standards Institution
Status
Current
Supersedes

This standard covers two cable types, Type A and Type B. Type A, jacketed fibre, is intended for printed circuit board inter-connection applications inside equipment. Type B, single core, is intended for general airframe and equipment inter-connection cable suitable for installation in all aircraft locations, with exception of power plant compartments. These cables are particularly suitable for use in military aircraft as well as for general civil aircraft applications.

Standards Relationship
EN 4532:2009 Identical

EN 2591-306:1998 Aerospace series - Elements of electrical and optical connection - Test methods - Part 306: Mould growth
EN 3745-305:2002 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 305: Immunity to ambient light coupling
EN 3745-205:2002 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 205: Cable longitudinal dimensional stability
EN 3745-512:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 512: Flexure endurance
EN 2591-316:1997 Aerospace series - Elements of electrical and optical connection - Test methods - Part 316: Ozone resistance
EN 3745-705:2007 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 705: Contrast measurement
EN 3745-202:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 202: Fibre dimensions
EN 3745-602:2008 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 602: Toxicity
EN 3745-301:2012 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 301: Attenuation
IEC 60793-1:1992 Optical fibres - Part 1: Generic specification
IEC 60794-1-2:2017 Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance
PREN 3733-001 : 200P1 AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
EN 3745-503:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 503: Scrape abrasion
EN 3745-603:2008 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 603: Nuclear radiation
EN 3745-411:2007 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 411: Resistance to fluids
MIL-HDBK-454 Revision B:2007 GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT
EN 3745-513:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 513: Crush resistance
EN 3745-100:2008 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 100: General
EN 3745-505:2007 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 505: Cable tensile strength
EN 3745-406:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 406: Cold bend test
EN 3745-203:2008 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 203: Cable dimensions
IEC 60874-1:2011 Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification
EN 3745-601:2007 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 601: Smoke density
EN 3745-402:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 402: Temperature cycling
EN 3745-412:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 412: Humidity resistance
EN 3745-401:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 401: Accelerated ageing
EN 3745-514:2009 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 514: Cable twist bend
PREN 3745-506 : 200P1 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 506: IMPACT RESISTANCE
EN 3745-407:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 407: Flammability
ISO 2574:1994 Aircraft — Electrical cables — Identification marking
EN 3745-510:2017 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 510: Bending test
ISO 1817:2015 Rubber, vulcanized or thermoplastic Determination of the effect of liquids

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.