BS EN 4604-008:2009
Current
Current
The latest, up-to-date edition.
Aerospace series. Cable, electrical, for signal transmission Cable, coaxial, 50 ohms, 200 °C., Type WD. Product standard
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
30-09-2009
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Required characteristics
5 Quality assurance
6 Designation
7 Identification and marking
8 Packaging, labelling and delivery lengths
9 Technical specification
Describes the required characteristics of a coaxial cable, 50 ohms, type WD, for use in aircraft electrical systems at operating temperature between -55 degrees C and 200 degrees C and specially for high frequency up to 8 GHz.
| Committee |
ACE/6
|
| DevelopmentNote |
Supersedes 08/30185108 DC. (10/2009)
|
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This standard specifies the required characteristics of a coaxial cable, 50, type WD, for use in aircraft electrical systems at operating temperature between 55 °C and 200 °C and specially for high frequency up to 8 GHz. Nevertheless, if needed, 65 °C is also acceptable as shown by thermal stability test.
| Standards | Relationship |
| EN 4604-008:2009 | Identical |
| EN 3475-401:2002 | Aerospace series - Cables, electrical, aircraft use - Test Methods - Part 401: Accelerated ageing |
| EN 3475-504:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 504: Torsion |
| EN 3475-513:2005 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 513: Deformation resistance (Installation with plastic cable ties) |
| EN 3475-703:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 703: Permanence of manufacturer's marking |
| EN 3475-409:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 409: Air-excluded ageing |
| EN 3475-302:2006 | Aerospace series - Cable, electrical, aircraft use - Test methods - Part 302: Voltage proof test |
| EN 3475-511:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 511: Cable-to-cable abrasion |
| EN 3475-411:2014 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids |
| EN 3475-202:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 202: Mass |
| EN 3475-507:2007 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 507: Adherence of plating |
| EN 3475-502:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 502: Notch propagation |
| EN 3475-807:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 807: Transfer impedance |
| TR 6058 : 2011 | AEROSPACE SERIES - CABLE CODE IDENTIFICATION LIST |
| EN 3475-415:2005 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 415: Rapid change of temperature |
| EN 3475-405:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 405: Bending at ambient temperature |
| EN 4604-001:2009 | Aerospace series - Cable, electrical, for signal transmission - Part 001: Technical specification |
| EN 3475-418:2007 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 418: Thermal endurance for conductors |
| EN 3475-410:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 410: Thermal endurance |
| EN 3475-506:2007 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 506: Plating continuity |
| EN 3475-515:2009 | Aerospace series - Cable, electrical, aircraft use - Test methods - Part 515: Crush resistance |
| EN 3475-305:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 305: Overload resistance |
| EN 3475-602:2007 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 602: Toxicity |
| EN 4604-002:2009 | Aerospace series - Cable, electrical, for signal transmission - Part 002: General |
| EN 3475-804:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 804: Velocity of propagation |
| EN 3475-404:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 404: Thermal shock |
| EN 3475-417:2009 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 417: Fire resistance of cables confined inside a harness |
| EN 3475-512:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 512: Flexure endurance |
| EN 3475-509:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 509: Solderability |
| EN 3475-306:2005 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 306: Continuity of conductors |
| EN 3475-201:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 201: Visual examination |
| EN 3475-505:2012 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands |
| EN 3475-702:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 702: Screen pushback capability |
| EN 3475-413:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 413: Wrap back test |
| EN 3475-812:2009 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 812: Return loss (VSWR) |
| EN 3475-514:2014 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 514: Porosity of copper cladding on aluminium strands |
| EN 3475-303:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 303: Insulation resistance |
| EN 3475-811:2009 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 811: Unbalance attenuation |
| EN 3475-601:2007 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 601: Smoke density |
| EN 3475-304:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 304: Surface resistance |
| EN 3475-503:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 503: Scrape abrasion |
| EN 3475-806:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 806: Attenuation |
| EN 3475-301:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 301: Ohmic resistance per unit length |
| EN 3475-706:2005 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 706: Laser markability |
| EN 3475-403:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 403: Delamination and blocking |
| EN 3475-402:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 402: Shrinkage and delamination |
| EN 3475-805:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 805: Characteristic impedance |
| EN 3475-510:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 510: Tensile strength and elongation of extruded insulation, sheath and jacket material |
| EN 3475-801:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 801: Capacitance per unit length |
| EN 3475-100:2010 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General |
| EN 3475-803:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 803: Capacitance variation |
| EN 3475-307:2015 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage |
| EN 3475-203:2006 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 203: Dimensions |
| EN 3475-416:2005 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 416: Thermal stability |
| EN 3475-414:2005 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test) |
| EN 3475-704:2007 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 704: Flexibility |
| EN 3475-412:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 412: Humidity resistance |
| EN 3475-408:2005 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 408: Fire resistance |
| EN 3475-501:2006 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 501: Dynamic cut-through |
| EN 3475-810:2009 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 810: Structural return loss |
| EN 3475-406:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 406: Cold bend test |
| EN 3475-809:2009 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 809: Resistance unbalance |
| EN 3475-705:2005 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 705: Contrast measurement |
| EN 3475-701:2017 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 701: Strippability and adherence of insulation to the conductor |
| EN 3475-508:2007 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 508: Plating thickness |
| EN 3475-407:2009 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 407: Flammability |
| EN 3475-808:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 808: Cross-talk |
| EN 3475-802:2009 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 802: Capacitance unbalance |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.