BS EN 4611-005:2012
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family Silver plated copper. Operating temperatures, between -65 °C and 150 °C. Single extruded wall for enclosed applications. UV laser printable. Product standard
Hardcopy , PDF
24-10-2018
English
29-02-2012
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Materials and construction
5 Required characteristics
6 Quality assurance
7 Designation
8 Identification and marking
9 Packaging, labelling and delivery lengths
10 Technical specification
Describes the characteristics of UV laser printable, silver plated copper conductor, electrical cables Crosslinked Ethylene Tetra Fluoro Ethylene co-polymer XLETFE family for use in the onboard electrical systems of aircraft at operating temperatures between -65 degrees C and 150 degrees C, operating at voltages not exceeding 600 V r.m.s and frequencies not exceeding 2000 Hz.
| Committee |
ACE/6
|
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| SupersededBy |
This European Standard specifies the characteristics of UV laser printable, silver plated copper conductor, electrical cables Crosslinked Ethylene Tetra Fluoro Ethylene co-polymer XLETFE family for use in the on-board electrical systems of aircraft at operating temperatures between -65 °C and 150 °C, operating at voltages not exceeding 600 V r.m.s and frequencies not exceeding 2 000 Hz. These cables are for enclosed applications e.g. within equipment or conduit; they are only suitable for open airframe use when provided with additional protection against mechanical abuse. In case of conflict between this European Standard and other referenced documents this European Standard should take precedence.
| Standards | Relationship |
| EN 4611-005:2012 | Identical |
| EN 3475-401:2002 | Aerospace series - Cables, electrical, aircraft use - Test Methods - Part 401: Accelerated ageing |
| EN 3475-504:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 504: Torsion |
| EN 3475-703:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 703: Permanence of manufacturer's marking |
| EN 3475-409:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 409: Air-excluded ageing |
| EN 3475-302:2006 | Aerospace series - Cable, electrical, aircraft use - Test methods - Part 302: Voltage proof test |
| EN 3475-511:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 511: Cable-to-cable abrasion |
| EN 3475-411:2014 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids |
| EN 3475-202:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 202: Mass |
| EN 3475-507:2007 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 507: Adherence of plating |
| EN 3475-502:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 502: Notch propagation |
| EN 3475-405:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 405: Bending at ambient temperature |
| EN 2235:2015 | Aerospace series - Single and multicore electrical cables, screened and jacketed - Technical specification |
| EN 4611-002:2012 | Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 002: General |
| EN 3475-410:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 410: Thermal endurance |
| EN 3475-506:2007 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 506: Plating continuity |
| EN 3475-305:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 305: Overload resistance |
| EN 2083:2001 | Aerospace series - Copper and copper alloys conductors for electrical cables - Product standard |
| EN 3475-602:2007 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 602: Toxicity |
| EN 3475-404:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 404: Thermal shock |
| EN 3475-512:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 512: Flexure endurance |
| EN 3475-509:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 509: Solderability |
| EN 3475-201:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 201: Visual examination |
| EN 3475-505:2012 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands |
| EN 3475-702:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 702: Screen pushback capability |
| EN 3475-413:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 413: Wrap back test |
| EN 3475-303:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 303: Insulation resistance |
| EN 3475-601:2007 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 601: Smoke density |
| EN 3475-304:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 304: Surface resistance |
| EN 3475-503:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 503: Scrape abrasion |
| EN 3475-301:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 301: Ohmic resistance per unit length |
| EN 3475-706:2005 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 706: Laser markability |
| EN 3475-403:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 403: Delamination and blocking |
| EN 3475-402:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 402: Shrinkage and delamination |
| EN 3475-510:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 510: Tensile strength and elongation of extruded insulation, sheath and jacket material |
| EN 3475-100:2010 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General |
| EN 2084:2015 | Aerospace series - Cables, electrical, general purpose, with conductors in copper or copper alloy - Technical specification |
| EN 3475-203:2006 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 203: Dimensions |
| EN 3475-414:2005 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test) |
| EN 3475-704:2007 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 704: Flexibility |
| EN 3475-412:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 412: Humidity resistance |
| EN 3475-408:2005 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 408: Fire resistance |
| EN 3475-501:2006 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 501: Dynamic cut-through |
| EN 3475-406:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 406: Cold bend test |
| EN 3475-705:2005 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 705: Contrast measurement |
| EN 3475-701:2017 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 701: Strippability and adherence of insulation to the conductor |
| EN 3475-508:2007 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 508: Plating thickness |
| EN 3475-407:2009 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 407: Flammability |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.