BS EN 4639-001:2007
Current
Current
The latest, up-to-date edition.
Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Technical specification
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
31-03-2008
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Description
4.1 General
4.2 Receptacle
4.3 Plug
4.4 Materials and surface treatment
5 Design
5.1 Housing
5.2 Modules
6 Definition drawings
6.1 General
6.2 Receptacle
6.3 Plug
6.4 Modules
6.5 Mating dimensions
7 Tests
7.1 Tests according to EN 2591-100
7.2 Special tests
8 Quality assurance
8.1 General
8.2 Qualification
8.3 Maintenance of qualification
9 Designation and marking
9.1 Fibre optic module
9.2 Fibre optic contact
Defines the general characteristics, the conditions for qualification, acceptance and quality assurance, as well as the test programs and groups for rectangular multipin fibre optic connectors.
| Committee |
ACE/6
|
| DevelopmentNote |
Supersedes 06/30145659 DC. (03/2008)
|
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This standard specifies the general characteristics, the conditions for qualification, acceptance and quality assurance, as well as the test programs and groups for rectangular multipin fibre optic connectors.
| Standards | Relationship |
| NF EN 4639-001 : 2008 | Identical |
| EN 4639-001:2007 | Identical |
| NEN EN 4639-001 : 2008 | Identical |
| NS EN 4639-001 : 1ED 2007 | Identical |
| I.S. EN 4639-001:2007 | Identical |
| EN 2591-311:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 311: Low air pressure |
| EN 2591-319:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 319: Gastightness of solderless wrapped connections |
| EN 2591-6401:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6401: Optical elements - Acceleration steady state |
| EN 2591-6324:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6324: Optical elements - Interfacial sealing |
| EN 2591-6405:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6405: Optical elements - Axial load |
| PREN 4644-001 : 200P3 | AEROSPACE SERIES - CONNECTOR, ELECTRICAL AND OPTICAL, RECTANGULAR, MODULAR, RECTANGULAR INSERTS, OPERATING TEMPERATURE 175 DEGREES C (OR 125 DEGREES C) CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| EN 2591-602:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 602: Optical elements - Variation of attenuation and optical discontinuity |
| EN 2591-308:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 308: Sand and dust |
| EN 2591-603:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 603: Optical elements - Change of power distribution |
| EN 2591-412:1999 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 412: Contact insertion and extraction forces |
| EN 2591-612:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 612: Optical elements - Effectiveness of cable attachment - Cable axial compression |
| EN 2591-610:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 610: Optical elements - Effectiveness of cable attachment - Cable pulling |
| PREN 4644-002 : 200P3 | AEROSPACE SERIES - CONNECTOR, ELECTRICAL AND OPTICAL, RECTANGULAR, MODULAR, RECTANGULAR INSERTS, OPERATING TEMPERATURE 175 DEGREES C (OR 125 DEGREES C) CONTINUOUS - PART 002: SPECIFICATION OF PERFORMANCE AND CONTACT ARRANGEMENTS |
| EN 2591-408:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 408: Mating and unmating forces |
| EN 2591-611:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 611: Optical elements - Effectiveness of cable attachment - Cable torsion |
| EN 2591-6317:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6317: Optical elements - Flammability |
| EN 2591-6307:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6307: Optical elements - Salt mist |
| EN 2591-101:1994 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 101: Visual examination |
| EN 2591-605:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 605: Optical elements - Return loss |
| EN 2591-312:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 312: Air leakage |
| EN 2591-102:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part A2: Examination of dimensions and mass |
| EN 2591-607:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 607: Optical elements - Immunity to ambient light coupling |
| EN 2591-6402:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6402: Optical elements - Shock |
| EN 2591-6403:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6403: Optical elements - Vibrations |
| EN 2591-614:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 614: Optical elements - Connector radial compression |
| MIL-I-81969-14 Revision C:1987 | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE 3, CLASS 2, COMPOSITION B |
| EN 2591-6316:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6316: Optical elements - Ozone resistance |
| EN 2591-410:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 410: Insert retention in housing (axial) |
| EN 2591-6321:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6321: Optical elements - Damp heat, cyclic test |
| EN 2591-320:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 320: Simulated solar radiation at ground level |
| EN 2591-6318:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6318: Optical elements - Fire resistance |
| EN 2591-6101:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6101: Optical elements - Visual examination |
| PREN 3197 : 200P2 | AEROSPACE SERIES - DESIGN AND INSTALLATION OF AIRCRAFT ELECTRICAL AND OPTICAL INTERCONNECTION SYSTEMS |
| EN 2591-6404:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6404: Optical elements - Transverse load |
| EN 2591-6314:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6314: Optical elements - Immersion at low air pressure |
| EN 2591-409:1999 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 409: Contact retention in insert |
| EN 2591-313:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 313: Artificial rain |
| EN 2591-506:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 506: Use of tools |
| EN 2591-609:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 609: Optical elements - Effectiveness of cable attachment - Cable cyclic flexing |
| EN 2591-407:1999 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 407: Durability of contact retention system and seals |
| EN 2591-6301:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6301: Optical elements - Endurance at temperature |
| EN 2591-321:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 321: Damp heat, cyclic test |
| EN 2591-100:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General |
| EN 2591-6323:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6323: Optical elements - Thermal shock (Hermetically sealed devices) |
| EN 2591-6415:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6415: Optical elements - Test probe damage |
| EN 2591-604:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 604: Optical elements - Cleaning capability of optical face |
| EN 2591-6303:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6303: Optical elements - Cold/low pressure and damp heat |
| EN 2591-613:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 613: Optical elements - Impact test |
| EN 2591-617:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 617: Optical elements - Temperature cycling |
| EN 2591-309:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 309: Dry heat |
| PREN 4644-003 : 200P3 | AEROSPACE SERIES - CONNECTOR, ELECTRICAL AND OPTICAL, RECTANGULAR, MODULAR, RECTANGULAR INSERTS, OPERATING TEMPERATURE 175 DEGREES C (OR 125 DEGREES C) CONTINUOUS - PART 003: RECTANGULAR INSERTS - PRODUCT STANDARD |
| EN 2591-304:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 304: Damp heat steady state |
| EN 2591-601:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 601: Optical elements - Insertion loss |
| EN 2591-411:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 411: Insert retention in housing (torsional) |
| EN 2591-615:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 615: Optical elements - Connection integrity at temperature |
| EN 2591-302:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 302: Climatic sequence |
| EN 2591-6414:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6414: Optical elements - Unmating of lanyard release optical connection elements |
| EN 2591-307:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 307: Salt mist |
| EN 3909:2016 | Aerospace series - Test fluids and test methods for electrical and optical components and sub-assemblies |
| EN 2591-6306:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6306: Optical elements - Mould growth |
| EN 2591-6315:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6315: Optical elements - Fluid resistance |
| EN 2591-6406:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6406: Optical elements - Mechanical endurance |
| EN 2591-310:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 310: Cold |
| EN 2591-6305:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6305: Optical elements - Rapid change of temperature |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.