EN 943-1:2015
|
Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols - Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits |
ISO 13934-1:2013
|
Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method |
ISO 13988:2008
|
Passenger vehicle wheels — Clip balance weight and rim flange nomenclature, test procedures and performance requirements |
EN 943-2:2002
|
Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 2: Performance requirements for "gas-tight" (Type 1) chemical protective suits for emergency teams (ET) |
EN ISO 1421:2016
|
Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (ISO 1421:2016) |
ISO 3175-2:2010
|
Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 2: Procedure for testing performance when cleaning and finishing using tetrachloroethene |
EN ISO 13937-2 : 2000
|
TEXTILES - TEAR PROPERTIES OF FABRICS - PART 2: DETERMINATION OF TEAR FORCE OF TROUSER-SHAPED TEST SPECIMENS (SINGLE TEAR METHOD) (ISO 13937-2:2000) |
ISO 6530:2005
|
Protective clothing — Protection against liquid chemicals — Test method for resistance of materials to penetration by liquids |
EN 1082-3:2000
|
Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 3: Impact cut test for fabric, leather and other materials |
EN 20811 : 1992
|
TEXTILES - DETERMINATION OF RESISTANCE TO WATER PENETRATION - HYDROSTATIC PRESSURE TEST |
EN ISO 13934-1:2013
|
Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013) |
CEN/TR 14560:2003
|
Guidance for selection, use, care and maintenance of protective clothing against heat and flame |
ISO 11612:2015
|
Protective clothing — Clothing to protect against heat and flame — Minimum performance requirements |
ISO 6330:2012
|
Textiles Domestic washing and drying procedures for textile testing |
89/686/EEC : 1989 AMD 5 2012
|
COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT |
EN 1149-1:2006
|
Protective clothing - Electrostatic properties - Part 1: Test method for measurement of surface resistivity |
ISO 6942:2002
|
Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat |
EN ISO 13998:2003
|
Protective clothing - Aprons, trousers and vests protecting against cuts and stabs by hand knives (ISO 13998:2003) |
EN ISO 11612:2015
|
Protective clothing - Clothing to protect against heat and flame - Minimum performance requirements (ISO 11612:2015) |
ISO 7941:1988
|
Commercial propane and butane Analysis by gas chromatography |
EN ISO 11611:2015
|
Protective clothing for use in welding and allied processes (ISO 11611:2015) |
ISO 15538:2001
|
Protective clothing for firefighters — Laboratory test methods and performance requirements for protective clothing with a reflective outer surface |
EN 863:1995
|
Protective clothing - Mechanical properties - Test method: Puncture resistance |
EN 136:1998/AC:2003
|
RESPIRATORY PROTECTIVE DEVICES - FULL-FACE MASKS - REQUIREMENTS, TESTING, MARKING |
ISO 15025:2016
|
Protective clothing Protection against flame Method of test for limited flame spread |
ISO 15384:2003
|
Protective clothing for firefighters Laboratory test methods and performance requirements for wildland firefighting clothing |
EN ISO 4674-1:2016
|
Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods (ISO 4674-1:2016) |
ISO 17493:2016
|
Clothing and equipment for protection against heat Test method for convective heat resistance using a hot air circulating oven |
ISO 11611:2015
|
Protective clothing for use in welding and allied processes |
EN ISO 6530:2005
|
Protective clothing - Protection against liquid chemicals - Test method for resistance of materials to penetration by liquids (ISO 6530:2005) |
ISO 14460:1999
|
Protective clothing for automobile racing drivers — Protection against heat and flame — Performance requirements and test methods |
EN 471:2003+A1:2007
|
High-visibility warning clothing for professional use - Test methods and requirements |
ISO 7933:2004
|
Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain |
EN 1149-2:1997
|
Protective clothing - Electrostatic properties - Part 2: Test method for measurement of the electrical resistance through a material (vertical resistance) |
ISO 11092:2014
|
Textiles — Physiological effects — Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) |
EN 13911:2017
|
Protective clothing for firefighters - Requirements and test methods for fire hoods for firefighters |
EN ISO 7933:2004
|
Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004) |
EN 31092:1993/A1:2012
|
TEXTILES - DETERMINATION OF PHYSIOLOGICAL PROPERTIES - MEASUREMENT OF THERMAL AND WATER-VAPOUR RESISTANCE UNDER STEADY-STATE CONDITIONS (SWEATING GUARDED - HOTPLATE TEST) (ISO 11092:1993/AMD 1:2012) |
EN ISO 15025:2016
|
Protective clothing - Protection against flame - Method of test for limited flame spread (ISO 15025:2016) |
EN 340:2003
|
Protective clothing - General requirements |
EN 137:2006
|
Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with full face mask - Requirements, testing, marking |
ISO 1421:2016
|
Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break |
EN 367:1992/AC:1992
|
PROTECTIVE CLOTHING - PROTECTION AGAINST HEAT AND FIRE - METHOD OF DETERMINING HEAT TRANSMISSION ON EXPOSURE TO FLAME |
ISO 7000:2014
|
Graphical symbols for use on equipment Registered symbols |
EN 1486:2007
|
Protective clothing for fire-fighters - Test methods and requirements for reflective clothing for specialised fire-fighting |
EN 531:1995/A1:1998
|
PROTECTIVE CLOTHING FOR INDUSTRIAL WORKERS EXPOSED TO HEAT |
ISO 4674-1:2016
|
Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods |
ISO 9886:2004
|
Ergonomics Evaluation of thermal strain by physiological measurements |
EN 533 : 1997
|
PROTECTIVE CLOTHING - PROTECTION AGAINST HEAT AND FLAME - LIMITED FLAME SPREAD MATERIALS AND MATERIAL ASSEMBLIES |
EN ISO 6330:2012
|
Textiles - Domestic washing and drying procedures for textile testing (ISO 6330:2012) |
EN 2419920 : 1992
|
TEXTILES - DETERMINATION OF RESISTANCE TO SURFACE WETTING (SPRAY TEST) OF FABRICS |
EN ISO 6942:2002
|
Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2002) |
EN ISO 9886:2004
|
Ergonomics - Evaluation of thermal strain by physiological measurements (ISO 9886:2004) |
ISO 13506:2008
|
Protective clothing against heat and flame Test method for complete garments Prediction of burn injury using an instrumented manikin |
EN 1149-3:2004
|
Protective clothing - Electrostatic properties - Part 3: Test methods for measurement of charge decay |
CLC/TS 50354:2003
|
Electrical arc test methods for material and garments, for use by workers at risk from exposure to an electrical arc |
ISO 11613:1999
|
Protective clothing for firefighters Laboratory test methods and performance requirements |