BS EN 50288-7:2005
Current
The latest, up-to-date edition.
Multi-element metallic cables used in analogue and digital communication and control Sectional specification for instrumentation and control cables
Hardcopy , PDF
English
31-07-2009
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1 Scope
2 Normative references
3 Definitions, symbols and abbreviations
4 Cable construction
4.1 Conductor
4.2 Insulation
4.3 Cable elements
4.4 Identification of cabling elements
4.5 Screening of cabling elements
4.6 Cable make-up
4.7 Filling compound
4.8 Interstitial fillers
4.9 Screening of the cable core
4.10 Moisture barriers
4.11 Protective wrappings
4.12 Inner sheath
4.13 Bedding layers
4.14 Metallic protection
4.15 Integral suspension strand
4.16 Outer sheathing
4.17 Fauna protection
4.18 Chemical and/or environmental protection
4.18.1 Lead sheath
4.18.2 Multi-layer sheath
5 Test methods and requirements for completed
cables
5.1 Electrical tests
5.1.1 Low frequency and d.c. electrical
measurements
5.2 Mechanical tests
5.3 Environmental tests
5.4 Fire performance test methods
Annex A (normative) - Insulation thickness and concentricity -
Selection of samples and evaluation of results
Annex B (normative) - Copper braid screening
Annex C (normative) - Determination of cable dimensions
Annex D (informative) - Thermocouple extension and compensating
conductors
Deals with multi-element cables suitable for connecting instruments and control systems for analogue or digital signal transmission.
| Committee |
EPL/46
|
| DevelopmentNote |
Supersedes 04/30117150 DC. (12/2005) Supersedes BS 5308-1(1986) and BS 5308-2(1986). (07/2009)
|
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NBN EN 50288-7 : 2006 | Identical |
| SN EN 50288-7 : 2005 | Identical |
| NEN EN 50288-7 : 2005 | Identical |
| DIN EN 50288-7 : 2006 COR 1 2009 | Identical |
| EN 50288-7:2005 | Identical |
| I.S. EN 50288-7:0 | Identical |
| NF EN 50288-7 : 2006 | Identical |
| BS PAS 5308-1(2009) : 2009 | CONTROL AND INSTRUMENTATION CABLES - PART 1: SPECIFICATION FOR POLYETHYLENE INSULATED CABLES |
| BS 6739:2009 | Code of practice for instrumentation in process control systems: installation design and practice |
| BS PAS 5308-2(2009) : 2009 | CONTROL AND INSTRUMENTATION CABLES - PART 2: SPECIFICATION FOR PVC INSULATED CABLES |
| EEMUA 133 : 2011 | SPECIFICATION FOR UNDERGROUND ARMOURED CABLE PROTECTED AGAINST SOLVENT PENETRATION AND CORROSIVE ATTACK |
| EN 10218-1:2012 | Steel wire and wire products - General - Part 1: Test methods |
| IEC 60228:2004 | Conductors of insulated cables |
| EN 10244-2:2009 | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings |
| EN 50307:2002 | Lead and lead alloys - Lead and lead alloy sheaths and sleeves of electric cables |
| IEC 60584-3:2007 | Thermocouples - Part 3: Extension and compensating cables - Tolerances and identification system |
| EN 10257-1:2011 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 1: Land cables |
| EN 60708:2005/AC:2016-08 | LOW-FREQUENCY CABLES WITH POLYOLEFIN INSULATION AND MOISTURE BARRIER POLYOLEFIN SHEATH |
| HD 383 : S2 AMD 2 | CONDUCTORS OF INSULATED CABLES - GUIDE TO THE DIMENSIONAL LIMITS OF CIRCULAR CONDUCTORS |
| IEC 60189-2:2007 | Low-frequency cables and wires with PVC insulation and PVC sheath - Part 2: Cables in pairs, triples, quads and quintuples for inside installations |
| IEC 60811-1-1:1993+AMD1:2001 CSV | Common test methods for insulating and sheathing materials of electric cables and optical cables - Part 1-1: Methods for general application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties |
| IEC 60708:2005 | Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath |
| EN 60811-1-1:1995/A1:2001 | INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - GENERAL APPLICATION - MEASUREMENT OF THICKNESS AND OVERALL DIMENSIONS - TESTS FOR DETERMINING MECHANICAL PROPERTIES |
| HD 446.3 : 200S1 | THERMOCOUPLES - EXTENSION AND COMPENSATING CABLES - TOLERANCES AND IDENTIFICATION SYSTEM |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.