Skip to content
Please enter a keyword to search

  • BS EN 50377-9-2:2004

    Current The latest, up-to-date edition.

    Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type MT-RJ terminated on IEC 60793-2 category B1.1 singlemode fibre

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  28-04-2004

    Publisher:  British Standards Institution

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    1 Scope
      1.1 Product definition
      1.2 Intermateability
      1.3 Operating environment
      1.4 Reliability
      1.5 Quality assurance
    2 Normative references
    3 Description
      3.1 Plug
      3.2 Adaptor
      3.3 Materials
      3.4 Dimensions
      3.5 Colour and marking
    4 Variants
      4.1 Terminated plug
      4.2 Adaptor
      4.3 Identification of variants
    5 Dimensional requirements
      5.1 Outline dimensions
          5.1.1 Plug variants
          5.1.2 Adaptor variants
      5.2 Mating face and other limit dimensions
          5.2.1 Plug
          5.2.2 Ferrule end face geometry after termination
          5.2.3 True position of fibre cores after termination
          5.2.4 Control of fibre axis
          5.2.5 Adaptor
    6 Tests
      6.1 Sample size
      6.2 Test and measurement methods
      6.3 Test sequence
      6.4 Pass/fail criteria
    7 Test report
    8 Performance requirements
      8.1 Dimensional requirements
      8.2 Optical performance requirements
      8.3 Mechanical performance requirements
      8.4 Environmental performance requirements
    Annex A (informative) Sample size and product sourcing requirements
    Bibliography

    Abstract - (Show below) - (Hide below)

    Contains the initial, start of life dimensional, optical, mechanical and environmental performance requirements which a terminated and assembled multimode MT-RJ connector set (plug adaptor plug) must meet in order for it to be categorised as an European Standard product.

    General Product Information - (Show below) - (Hide below)

    Committee GEL/86/2
    Development Note Supersedes 02/210340 DC (05/2004)
    Document Type Standard
    Publisher British Standards Institution
    Status Current
    Supersedes

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 61300-2-5:2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion
    EN 61300-2-18:2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance
    EN 61300-2-1:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal)
    EN 61300-3-4:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation
    EN 61300-2-17:2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold
    EN 61300-2-2:2009/corrigendum:2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-2: TESTS - MATING DURABILITY
    EN 61300-2-21:2010 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-21: Tests - Composite temperature/humidity cyclic test
    EN 61300-2-6:2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism
    ISO/IEC 11801:2002 Information technology Generic cabling for customer premises
    EN 61300-2-22:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature
    IEC 61753-1:2007 Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards
    EN 61300-3-6:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss
    EN 61753-021-2:2008 Fibre optic interconnecting devices and passive components performance standard - Part 021-2: Grade C/3 single-mode fibre optic connectors for category C - Controlled environment
    EN 61300-2-12:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-12: Tests - Impact
    EN 61300-2-4:1997 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention
    EN 60793-2:2016 Optical fibres - Part 2: Product specifications - General
    IEC 60794-2:2017 Optical fibre cables - Part 2: Indoor cables - Sectional specification
    EN 61300-2-42:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for strain relief
    EN 50173 : 95 AMD 1 2000 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS
    EN 61300-2-19:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state)
    EN 61300-3-34:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-34: Examinations and measurements - Attenuation of random mated connectors
    EN 61300-2-7:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-7: Tests - Bending moment
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective