BS EN 506:2008
Current
The latest, up-to-date edition.
Roofing products of metal sheet. Specification for self-supporting products of copper or zinc sheet
Hardcopy , PDF
English
31-03-2009
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions, symbols and abbreviations
3.1 General
3.2 Materials
3.3 Profile definitions
3.4 Product geometry
3.5 Symbols and abbreviations
4 Requirements
4.1 General
4.2 Materials
4.2.1 Copper
4.2.2 Organic coatings or chemical treatments on
zinc-copper-titanium
4.2.3 Material tolerances
4.3 Products
4.3.1 Mechanical resistance
4.3.2 Calculation
4.3.3 Dimensions
4.3.4 Dimensional tolerances for the profiled sheets
4.3.5 Safety in case of fire
5 Test methods
5.1 Material properties
5.2 Structural properties
6 Designation
7 Marking, labelling and packaging
7.1 Marking and labelling
7.2 Packaging and special ordering conditions
7.3 Transport, storage and handling
Annex A (normative) - Dimensional tolerances
A.1 Tolerances for trapezoidal sheets
A.1.1 General
A.1.2 Depth of profile
A.1.3 Depth of stiffeners
A.1.4 Pitch
A.1.5 Widths of crown and valley
A.1.6 Cover width
A.1.7 Radius of bends
A.1.8 Deviation from straightness
A.1.9 Deviation from squareness
A.1.10 Length
A.1.11 Deviation of side lap
A.1.12 Curve radius and angles
A.2 Tolerances for sinusoidal profiles
A.3 Tolerances on tiles
A.3.1 General
A.3.2 Depth of tile
A.3.3 Web angular displacement
A.3.4 Pitch
A.3.5 Width of crown and valley
A.3.6 Cover width
A.3.7 Radius of bends
A.3.8 Deviation from straightness
A.3.9 Deviation from squareness
A.3.10 Length
A.3.11 Contraction or bulging
A.4 Methods for measuring profiles
A.4.1 General
A.4.2 Depth of profile
A.4.3 Depth of stiffeners
A.4.4 Pitch
A.4.5 Width of crown and valley
A.4.6 Cover width
A.4.7 Radius of bends
A.4.8 Straightness
A.4.9 Squareness
A.4.10 Length
A.4.11 Side laps
A.4.12 Side lap ripple
Annex B (informative) - Test methods for concentrated load
Bibliography
Describes requirements for self-supporting roofing products for discontinuous laying made from copper or zinc-copper-titanium alloy sheet with or without additional organic coatings.
Committee |
B/542/5
|
DevelopmentNote |
Supersedes 96/104022 DC. (09/2002) Supersedes 07/30168401 DC. (03/2009)
|
DocumentType |
Standard
|
Pages |
38
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
This European Standard specifies requirements for self-supporting roofing products for discontinuous laying made from copper or zinc-copper-titanium alloy sheet with or without additional organic coatings. The standard establishes general characteristics, definitions and labelling for the products, together with requirements for the materials from which the products can be manufactured. It is intended to be used either by manufacturers to ensure that their products comply with the requirements or by purchasers to verify that the products comply before they are despatched from the factory. It specifies the requirements for products which enable them to meet all normal service conditions. The standard applies to all discontinuously laid self-supporting external profiled sheets for roofing with the exception of tiles with a surface area less than 1 m2 and produced by stamping. These profiled roof sheets are designed to keep wind, rain and snow out of the building and to transfer any resultant loads and infrequent maintenance loads to the structure. No requirements for supporting construction, design of roof system and execution of connections and flashings are included.
Standards | Relationship |
UNE-EN 506:2010 | Identical |
NBN EN 506 : 2008 | Identical |
NEN EN 506 : 2008 | Identical |
I.S. EN 506:2008 | Identical |
SN EN 506 : 2008 | Identical |
DIN EN 506:2009-07 | Identical |
NS EN 506 : 2ED 2008 | Identical |
EN 506:2008 | Identical |
UNI EN 506 : 2008 | Identical |
NF EN 506 : 2008 | Identical |
BS EN 501:1994 | Roofing products from metal sheet. Specifications for fully supported roofing products of zinc sheet |
PD 476-3:2012 | Classification rules for the end-use application of test results arising from BS 476-3, \'Classification and method of test for external fire exposure of roofs\' |
BS 5427(2016) : 2016 | CODE OF PRACTICE FOR THE USE OF PROFILED SHEET FOR ROOF AND WALL CLADDING ON BUILDINGS |
11/30256741 DC : DRAFT DEC 2011 | PD 476-3 - CLASSIFICATION RULES FOR THE END-USE APPLICATION OF TEST RESULTS ARISING FROM BS 476-3:2004 "CLASSIFICATION AND METHOD OF TEST FOR EXTERNAL FIRE EXPOSURE OF ROOFS" |
12/30256741 DC : 0 | BS PD 476-33 - CLASSIFICATION RULES FOR THE END-USE APPLICATION OF TEST RESULTS ARISING FROM BS 476-3:2004 - CLASSIFICATION AND METHOD OF TEST FOR EXTERNAL FIRE EXPOSURE OF ROOFS |
ISO 1190-1:1982 | Copper and copper alloys — Code of designation — Part 1: Designation of materials |
EN 14782:2006 | Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements |
EN 988:1996 | Zinc and zinc alloys - Specifications for rolled flat products for building |
EN 1172:2011 | Copper and copper alloys - Sheet and strip for building purposes |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
EN 10204:2004 | Metallic products - Types of inspection documents |
ISO 9001:2015 | Quality management systems — Requirements |
NFP 34 503 : 1995 | PROFILED SHEETING MADE OF COATED OR NON-COATED STEEL SHEET AND PANELS - BENDING TESTS UNDER LINEAR LOADS AND/OR UNDER CONCENTRATED LOADS |
ISO 431:1981 | Copper refinery shapes |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.