BS EN 508-2:2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Roofing products from metal sheet. Specification for self supporting products of steel, aluminium or stainless steel sheet Aluminium
Hardcopy , PDF
22-08-2019
English
31-05-2009
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions, symbols and abbreviations
3.1 General
3.2 Material definitions
3.3 Profile definitions
3.4 Product geometry
3.5 Symbols and abbreviations
4 Requirements
4.1 General
4.2 Materials
4.2.1 Aluminium
4.2.2 Organic coatings
4.3 Products
4.3.1 Mechanical resistance
4.3.2 Calculation and tests of mechanical resistance
4.3.3 Dimensions
4.3.4 Dimensional tolerances for the profiled sheet
4.3.5 Safety in case of fire
5 Test methods
5.1 Material properties
5.2 Surface properties
5.3 Structural properties
6 Designation
7 Marking, labelling and packaging
7.1 Marking and labelling
7.2 Packaging and special ordering conditions
7.3 Transport, storage and handling
Annex A (normative) - Dimensional tolerances
A.1 Tolerances for trapezoidal sheets
A.1.1 General
A.1.2 Depth of profile
A.1.3 Depth of stiffeners
A.1.4 Pitch
A.1.5 Widths of crown and valley
A.1.6 Cover width
A.1.7 Radius of bends
A.1.8 Deviation from straightness
A.1.9 Deviation from squareness
A.1.10 Length
A.1.11 Deviation of side lap
A.1.12 Curve radius and angles
A.2 Tolerances for sinusoidal profiles
A.3 Tolerances on tiles
A.3.1 General
A.3.2 Depth of tile
A.3.3 Web angular displacement
A.3.4 Pitch
A.3.5 Width of crown and valley
A.3.6 Cover width
A.3.7 Radius of bends
A.3.8 Deviation from straightness
A.3.9 Deviation from squareness
A.3.10 Length
A.3.11 Contraction or bulging
A.4 Methods for measuring profiles
A.4.1 General
A.4.2 Depth of profile
A.4.3 Depth of stiffeners
A.4.4 Pitch
A.4.5 Width of crown and valley
A.4.6 Cover width
A.4.7 Radius of bends
A.4.8 Straightness
A.4.9 Squareness
A.4.10 Length
A.4.11 Side laps
A.4.12 Side lap ripple
Annex B (informative) - Test methods for concentrated load
Bibliography
Describes requirements for self-supporting roofing products for discontinuous laying made from aluminium sheet with or without additional organic coatings.
| Committee |
B/542/5
|
| DevelopmentNote |
Supersedes 96/104025 DC. (09/2002) Supersedes 07/30168410 DC. (03/2009)
|
| DocumentType |
Standard
|
| Pages |
40
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNE-EN 508-2:2010 | Identical |
| ONORM EN 508-2 : 2008 | Identical |
| NS EN 508-2 : 2ED 2008 | Identical |
| NBN EN 508-2 : 2008 | Identical |
| UNI EN 508-2 : 2008 | Identical |
| SN EN 508-2 : 2008 | Identical |
| NEN EN 508-2 : 2008 | Identical |
| EN 508-2:2008 | Identical |
| I.S. EN 508-2:2008 | Identical |
| NF EN 508-2 : 2008 | Identical |
| DIN EN 508-2:2009-07 | Identical |
| BS 5427(2016) : 2016 | CODE OF PRACTICE FOR THE USE OF PROFILED SHEET FOR ROOF AND WALL CLADDING ON BUILDINGS |
| 15/30095322 DC : 0 | BS 5427 - CODE OF PRACTICE FOR THE USE OF PROFILED SHEET FOR ROOF AND WALL CLADDING ON BUILDINGS |
| EN 485-1:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
| EN 14782:2006 | Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements |
| EN 485-2:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties |
| EN 485-4:1993 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products |
| EN 1396:2015 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| EN 12258-1:2012 | Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 515:2017 | Aluminium and aluminium alloys - Wrought products - Temper designations |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 9001:2015 | Quality management systems — Requirements |
| NFP 34 503 : 1995 | PROFILED SHEETING MADE OF COATED OR NON-COATED STEEL SHEET AND PANELS - BENDING TESTS UNDER LINEAR LOADS AND/OR UNDER CONCENTRATED LOADS |
| EN 573-3:2013 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.