HD 397 : 200S1
|
INTERPRETATION OF THE ANALYSIS OF GASES IN TRANSFORMERS AND OTHER OIL-FILLED ELECTRICAL EQUIPMENT IN SERVICE |
IEC 60038:2009
|
IEC standard voltages |
IEC 60270:2000+AMD1:2015 CSV
|
High-voltage test techniques - Partial discharge measurements |
IEC 60721-1:1990+AMD1:1992+AMD2:1995 CSV
|
Classification of environmental conditions - Part 1: Environmental parameters and their severities |
IEC 60028:1925
|
International standard of resistance for copper |
EN 60721-3-1:1997
|
Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 1: Storage |
HD 478.2.3 : 200S1
|
CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - ENVIRONMENTAL CONDITIONS APPEARING IN NATURE - AIR PRESSURE |
HD 478.2.2 : 200S1
|
CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - ENVIRONMENTAL CONDITIONS APPEARING IN NATURE - PRECIPITATION AND WIND |
IEC 60721-3-9:1993
|
Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 9: Microclimates inside products |
HD 478.2.6 : 200S1
|
CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - ENVIRONMENTAL CONDITIONS APPEARING IN NATURE - EARTHQUAKE VIBRATION AND SHOCK |
IEC 60721-2-7:1987
|
Classification of environmental conditions. Part 2: Environmental conditions appearing in nature. Fauna and flora |
EN 60721-3-9:1993/A1:1995
|
CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - PART 3: CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - SECTION 9: MICROCLIMATES INSIDE PRODUCTS |
IEC 60599:2015
|
Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis |
EN 60721-3-5:1997
|
Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 5: Ground vehicle installations |
IEC 60721-3-7:1995+AMD1:1996 CSV
|
Classification of environmental conditions - Part 3-7: Classification of groups of environmental parameters and their severities - Portable and non-stationary use |
IEC 60721-3-5:1997
|
Classification of environmental conditions - Part 3: Classificationof groups of environmental parameters and their severities -Section 5: Ground vehicle installations |
IEC 60721-2-5:1991
|
Classification of environmental conditions - Part 2: Environmental conditions appearing in nature - Section 5: Dust, sand, salt mist |
IEC 60559:1989
|
Binary floating-point arithmetic for microprocessor systems |
EN 60721-3-0:1993
|
Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Introduction |
HD 478.2.1 : 200S1
|
CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - ENVIRONMENTAL CONDITIONS APPEARING IN NATURE - TEMPERATURE AND HUMIDITY |
IEC 60567:2011
|
Oil-filled electrical equipment - Sampling of gases and analysis of free and dissolved gases - Guidance |
EN 60721-3-7:1995/A1:1997
|
CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - PART 3: CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - SECTION 7: PORTABLE AND NON-STATIONARY USE |
HD 588.1 : S1 AMD 1
|
HIGH VOLTAGE TEST TECHNIQUES - GENERAL DEFINITIONS AND TEST REQUIREMENTS |
HD 472 S1:1989/AC:2013
|
NOMINAL VOLTAGES FOR LOW-VOLTAGE PUBLIC ELECTRICITY SUPPLY SYSTEMS |
EN 60044-6 : 1999
|
INSTRUMENT TRANSFORMERS - REQUIREMENTS FOR PROTECTIVE CURRENT TRANSFORMERS FOR TRANSIENT PERFORMANCE |
IEC 60085:2007
|
Electrical insulation - Thermal evaluation and designation |
IEC 60721-2-1:2013
|
Classification of environmental conditions - Part 2-1: Environmental conditions appearing in nature - Temperature and humidity |
IEC 60721-2-2:2012
|
Classification of environmental conditions - Part 2-2: Environmental conditions appearing in nature - Precipitation and wind |
HD 478.2.4 : 200S1
|
CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - ENVIRONMENTAL CONDITIONS APPEARING IN NATURE - SOLAR RADIATION AND TEMPERATURE |
IEC 60721-2-6:1990
|
Classification of environmental conditions. Part 2: Environmental conditions appearing in nature. Earthquake vibration and shock |
IEC 60044-6:1992
|
Instrument transformers - Part 6: Requirements for protective current transformers for transient performance |
IEC 60121:1960
|
Recommendation for commercial annealed aluminium electrical conductor wire |
HD 566 : 200S1
|
THERMAL EVALUATION AND CLASSIFICATION OF ELECTRICAL INSULATION |
IEC 60721-3-0:1984+AMD1:1987 CSV
|
Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Introduction |
IEC 60721-3-2:1997
|
Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 2: Transportation |
EN 60071-1:2006/A1:2010
|
INSULATION CO-ORDINATION - PART 1: DEFINITIONS, PRINCIPLES AND RULES |
IEC 60721-2-8:1994
|
Classification of environmental conditions - Part 2: Environmental conditions appearing in nature - Section 8: Fire exposure |
IEC 60050-321:1986
|
International Electrotechnical Vocabulary (IEV) - Part 321: Instrument transformers |
IEC 60721-3-3:1994+AMD1:1995+AMD2:1996 CSV
|
Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations |
HD 478.2.5 : 200S1
|
CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - ENVIRONMENTAL CONDITIONS APPEARING IN NATURE - DUST, SAND, SALT MIST |
IEC 60721-2-4:1987+AMD1:1988 CSV
|
Classification of environmental conditions - Part 2-4: Environmental conditions appearing in nature - Solar radiation and temperature |
HD 478.2.7 : 200S1
|
CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - ENVIRONMENTAL CONDITIONS APPEARING IN NATURE - FAUNA AND FLORA |
EN 60721-1:1995/A2:1995
|
CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - PART 1: ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES |
EN 60721-3-2:1997
|
Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 2: Transportation |
IEC 60060-1:2010
|
High-voltage test techniques - Part 1: General definitions and test requirements |
IEC 60071-1:2006+AMD1:2010 CSV
|
Insulation co-ordination - Part 1: Definitions, principles and rules |
IEC 60721-3-6:1987
|
Classification of environmental conditions. Part 3: Classification of groups of environmental parameters and their severities. Ship environment |
EN 60721-3-4:1995/A1:1997
|
CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - PART 3: CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - SECTION 4: STATIONARY USE AT NON-WEATHER-PROTECTED LOCATIONS |
EN 60721-3-6:1993/A2:1997
|
CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - PART 3: CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - SHIP ENVIRONMENT |
EN 60567:2011
|
OIL-FILLED ELECTRICAL EQUIPMENT - SAMPLING OF GASES AND ANALYSIS OF FREE AND DISSOLVED GASES - GUIDANCE (IEC 60567:2011) |
IEC 60721-2-3:2013
|
Classification of environmental conditions - Part 2-3: Environmental conditions appearing in nature - Air pressure |
IEC 60721-3-1:1997
|
Classification of environmental conditions - Part 3 Classification of groups of environmental parameters and their severities - Section 1: Storage |
EN 60721-3-3 : 95 AMD 2 97
|
CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - STATIONARY USE AT WEATHER-PROTECTED LOCATIONS |