BS EN 61199:2011+A2:2015

This International Standard specifies the safety requirements for It also specifies the method a manufacturer should use to show compliance with the requirements of this standard on the basis of whole production appraisal in association with his test records on finished products. This method can also be applied for certification purposes. Details of a batch test procedure which can be used to make limited assessment of batches are also given in this standard. This part of the standard covers photobiological safety according to IEC62471 and IEC/TR62471‑2 . Blue light and infrared hazards are below the level which requires marking. NOTE Compliance with this standard concerns only safety criteria and does not take into account the performance of single-capped fluorescent lamps for general lighting purposes with respect to luminous flux, colour, starting and operational characteristics. For this information, readers are referred to IEC60901 . Table1 Sheet references of IEC60061 Cap type Sheet numbers IEC60061‑3 Lamp caps Cap gauges 2G7 7004-102 7006-102 2GX7 7004-103 7006-102 2G8 7004-141 7006-141, 141H, 141J, 141K GR8 7004-68 7006-68A, 68B, 68E G10q 7004-54 7006-79 GR10q 7004-77 7006-77A, 68B, 68E GU10q 7004-123 7006-123, 123A GX10q 7004-84 7006-79, 84, 84A and 84B GY10q 7004-85 7006-79, 85 and 85A GZ10q 7004-124 7006-79 2G10 7004-118 7006-118 2G11 7004-82 7006-82 2GX11-1 7004-82A 7006-82F, 82G, 82H 2GX13 7004-125 7006-125A, 125B G23 7004-69 7006-69 GX23 7004-86 7006-86 G24, GX24 7004-78 7006-78 GZ24q * GX32 7004-87 7006-87 * to be developed. It may be expected that lamps which comply with this standard will operate safely at supply voltages between 90% and 110% of rated supply voltage of the used ballast and when operated with a ballast complying with IEC61347‑2‑3 or IEC61347‑2‑8 with a starting device complying with IEC60155 (if applicable) and in a luminaire complying with IEC60598‑1 .