BS EN 61442:2005
Current
The latest, up-to-date edition.
Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV)
Hardcopy , PDF
English
29-09-2005
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1 Scope
2 Normative references
3 Test installations and conditions
4 AC voltage tests
4.1 Dry test for all accessories
4.2 Wet test for outdoor terminations
4.3 Test in water for stop ends
5 DC voltage tests
5.1 Installation
5.2 Method
6 Impulse voltage tests
6.1 Installation
6.2 Method
6.3 Test at elevated temperature
7 Partial discharge test
7.1 Method
7.2 Test at elevated temperature
8 Tests at elevated temperature
8.1 Installation and connection
8.2 Measurement of temperature
9 Heating cycles voltage test
9.1 Installation and method
9.2 Test in air
9.3 Test in water
9.4 Immersion test for outdoor terminations
10 Thermal short-circuit test (screen)
10.1 Installation
10.2 Method
11 Thermal short-circuit test (conductor)
11.1 Installation
11.2 Method
12 Dynamic short-circuit test
12.1 Installation
12.2 Method
13 Humidity and salt fog tests
13.1 Apparatus
13.2 Installation
13.3 Method
14 Impact test at ambient temperature
15 Screen resistance measurement
15.1 Installation
15.2 Method
16 Screen leakage current measurement
16.1 Installation
16.2 Method
17 Screen fault current initiation test
17.1 Installation
17.2 Method
18 Operating force test
18.1 Installation
18.2 Method
19 Operating eye test
19.1 Installation
19.2 Method
20 Capacitive test point performance
20.1 Installation
20.2 Test method
Annex A (informative) Determination of the cable
conductor temperature
A.1 Purpose
A.2 Calibration of the test cable conductor temperature
A.3 Heating for accessory test
Annex B (informative) Details of the test chamber and
spray equipment for humidity and salt fog tests
B.1 Test chamber
B.2 Spray equipment for humidity and salt fog tests
B.3 High voltage transformers
Annex ZA (normative) Normative references to international
publications with their corresponding European
publications
Bibliography
Specifies the test methods to be used for type testing accessories for power cables with rated voltages from 6 kV (U[m] = 7,2 kV) up to 36 kV (U[m] = 42 kV).
| Committee |
GEL/20/11
|
| DevelopmentNote |
Supersedes 02/206359 DC. (10/2005) Together with BS 7888-4.1(2006), BS 7888-4.2(2006) and BS EN 50393 it supersedes BS 7888-1(1998) and BS 7888-2(1998). (08/2006)
|
| DocumentType |
Standard
|
| Pages |
34
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
Specifies the test methods to be used for type testing accessories for power cables with rated voltage from 3,6/6 (7,2) kV up to 18/30 (36) kV. Test methods are specified for accessories for extruded and paper insulated cables according to IEC 60502-2 and IEC 60055-1 respectively. Significant technical changes with respect to the previous edition are as follows: a) a test in water has been added for stop ends; b) the heating cycles voltage test has been revised to clarify testing in air and water; c) the testing conditions for the short-circuit tests have been redefined; d) additional information has been provided for testing separable connectors with a metallic housing; e) tests not required by IEC, i.e. an immersion test for outdoor terminations and an impact test, have been included in order to have a common test method document with CENELEC under the IEC/CLC Dresden agreement.
| Standards | Relationship |
| I.S. EN 61442:2005 | Identical |
| NF EN 61442 : 2005 | Identical |
| EN 61442:2005 | Identical |
| NBN EN 61442 : 2006 | Identical |
| DIN EN 61442 : 2006 | Identical |
| IEC 61442:2005 | Identical |
| UNE-EN 61442:2005 | Identical |
| IEC 60270:2000+AMD1:2015 CSV | High-voltage test techniques - Partial discharge measurements |
| IEC 60055-1:1997+AMD1:2005 CSV | Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables and their accessories |
| IEC 60228:2004 | Conductors of insulated cables |
| IEC 60986:2000+AMD1:2008 CSV | Short-circuit temperature limits of electric cables with rated voltages from 6 kV (<em>U</em><sub>m</sub> = 7,2 kV) up to 30 kV (<em>U</em><sub>m</sub> = 36 kV) |
| EN 61238-1:2003 | Compression and mechanical connectors for power cables for rated voltages up to 36 kV (Um = 42 kV) - Part 1: Test methods and requirements |
| IEC 60502-2:2014 RLV | Power cables with extruded insulation and their accessories for rated voltages from 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) up to 30 kV (<em>U</em><sub>m</sub> = 36 kV) – Part 2: Cables for rated voltages from 6 kV (<em>U</em><sub>m</sub> = 7,2 kV) up to 30 kV (<em>U</em><sub>m</sub> = 36 kV) |
| IEC 60885-3:2015 RLV | Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables |
| HD 588.1 : S1 AMD 1 | HIGH VOLTAGE TEST TECHNIQUES - GENERAL DEFINITIONS AND TEST REQUIREMENTS |
| EN 60270:2001/A1:2016 | HIGH-VOLTAGE TEST TECHNIQUES - PARTIAL DISCHARGE MEASUREMENTS (IEC 60270:2000/A1:2015) |
| IEC 60230:1966 | Impulse tests on cables and their accessories |
| IEC 60811-1-2:1985 | Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section Two: Thermal ageing methods |
| IEC 61238-1:2003 | Compression and mechanical connectors for power cables for rated voltages up to 30 kV (Um = 36 kV) - Part 1: Test methods and requirements |
| EN 60811-1-2:1995/A2:2000 | INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - GENERAL APPLICATION - THERMAL AGEING METHODS |
| EN 60885-3:2015 | Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables |
| EN 60230:2002 | Impulse tests on cables and their accessories |
| IEC 60060-1:2010 | High-voltage test techniques - Part 1: General definitions and test requirements |
| IEC 60507:2013 | Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.