BS EN 61978-1:2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Fibre optic interconnecting devices and passive components. Fibre optic passive chromatic dispersion compensators Generic specification
Hardcopy , PDF
English
30-09-2014
05-06-2024
| Committee |
GEL/86/2
|
| DevelopmentNote |
Supersedes 98/260043 DC. (05/2005) Supersedes 08/30169101 DC. (04/2010)
|
| DocumentType |
Standard
|
| Pages |
34
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
IEC 61978-1:2014 applies to fibre optic passive chromatic dispersion compensators, all exhibiting the following features:
- they are optically passive;
- they have an optical input and an optical output for transmitting optical power;
- the ports are optical fibres or optical fibre connectors;
- they are wavelength sensitive;
- they may be polarization sensitive. This standard establishes uniform requirements for the passive chromatic dispersion compensator. This third edition cancels and replaces the second edition, published in 2009, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- introduction of new terms and definitions;
- revision of classifications;
- addition of Annex E. Keywords: fibre optic passive chromatic dispersion compensators
| Standards | Relationship |
| EN 61978-1:2014 | Identical |
| IEC 61978-1:2014 | Identical |
| DIN EN 61978-1 : 2015 | Identical |
| I.S. EN 61978-1:2014 | Identical |
| NBN EN 61978-1 : 2014 | Identical |
| NF EN 61978-1 : 2016 | Identical |
| UNE-EN 61978-1:2003 | Identical |
| EN 61300-3-38:2012 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-38:Examinations and measurements - Group delay, chromatic dispersion and phase ripple |
| IEC 60050-731:1991 | International Electrotechnical Vocabulary (IEV) - Part 731: Optical fibre communication |
| EN 60793-2-50:2016 | Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres |
| ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
| EN 61754-13:2006 | Fibre optic connector interfaces - Part 13: Type FC-PC connector |
| IEC 60869-1:2012 | Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic specification |
| IEC 60410:1973 | Sampling plans and procedures for inspection by attributes |
| EN 61754-4:2013/AC:2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 4: TYPE SC CONNECTOR FAMILY (IEC 61754-4:2013) |
| EN 61300-1:2016 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance |
| IEC TR 61930:1998 | Fibre optic graphical symbology |
| IEC 61754-13:2006 | Fibre optic connector interfaces - Part 13: Type FC-PC connector |
| IEC GUIDE 102:1996 | Electronic components - Specification structures for quality assessment (Qualification approval and capability approval) |
| ISO 8601:2004 | Data elements and interchange formats — Information interchange — Representation of dates and times |
| IEC 61300-1:2016 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance |
| IEC TR 61931:1998 | Fibre optic - Terminology |
| EN 60869-1:2013 | Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic specification |
| ISO 286-1:2010 | Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 1: Basis of tolerances, deviations and fits |
| IEC 61073-1:2009 | Fibre optic interconnecting devices and passive components - Mechanical splices and fusion splice protectors for optical fibres and cables - Part 1: Generic specification |
| IEC 61300-3-38:2012 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-38: Examinations and measurements - Group delay, chromatic dispersion and phase ripple |
| IEC 60793-2-50:2015 | Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres |
| ISO 129-1:2004 | Technical drawings — Indication of dimensions and tolerances — Part 1: General principles |
| EN 61073-1:2009 | Fibre optic interconnecting devices and passive components - Mechanical splices and fusion splice protectors for optical fibres and cables - Part 1: Generic specification |
| IEC 61754-15:2009 | Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 15: Type LSH connector family |
| EN 61754-15:2009/AC:2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 15: TYPE LSH CONNECTOR FAMILY (IEC 61754-15:2009) |
| EN 60695-11-5:2017 | Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
| IEC 61754-4:2013 | Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4: Type SC connector family |
| IEC 60695-11-5:2016 | Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.