• There are no items in your cart

BS EN 62282-3-1:2007

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Fuel cell technologies Stationary fuel cell power systems. Safety

Available format(s)

Hardcopy , PDF

Superseded date

31-05-2012

Language(s)

English

Published date

31-07-2007

1 Scope
2 Normative references
3 Terms and definitions
4 Safety requirements and protective measures
  4.1 General safety strategy
  4.2 Physical environment and operating conditions
  4.3 Selection of materials
  4.4 General requirements
  4.5 Pressure equipment and piping
  4.6 Protection against fire or explosion hazards
  4.7 Electrical safety
  4.8 Electromagnetic compatibility (EMC)
  4.9 Control systems and protective components
  4.10 Pneumatic and hydraulic powered equipment
  4.11 Valves
  4.12 Rotating equipment
  4.13 Cabinets
  4.14 Thermal insulating materials
  4.15 Utilities
  4.16 Installation and maintenance
5 Type tests
  5.1 General requirements
  5.2 Test fuels
  5.3 Basic test arrangements
  5.4 Leakage tests
  5.5 Strength tests
  5.6 Normal operation type test
  5.7 Electrical overload test
  5.8 Dielectric requirements and simulated abnormal conditions
  5.9 Shutdown parameters
  5.10 Burner operating characteristics tests
  5.11 Automatic control of burners and catalytic oxidation
       reactors
  5.12 Exhaust gas temperature test
  5.13 Surface and component temperatures
  5.14 Wind tests
  5.15 Rain test
  5.16 CO emissions
  5.17 Leakage tests (repeat)
6 Routine tests
7 Marking, labelling and packaging
  7.1 General requirements
  7.2 Fuel cell power system marking
  7.3 Marking of components
  7.4 Technical documentation
Annex A (informative) Significant hazards, hazardous situations
        and events dealt with in this standard
Annex B (informative) Carburization and material compatibility
        for hydrogen service
Annex C (normative) Test wall
Annex D (normative) Vent test wall
Annex E (normative) Piezo ring and details of typical
        construction
Annex ZA (normative) Normative references to international
         publications with their corresponding European
         publications

Pertains to stationary packaged, self-contained fuel cell power systems or fuel cell power systems comprised of factory matched packages of integrated systems which generate electricity through electrochemical reactions.

Applies to stationary packaged, self-contained fuel cell power systems or fuel cell power systems comprised of factory matched packages of integrated systems which generate electricity through electrochemical reactions. Is a product safety standard suitable for conformity assessment.

Committee
GEL/105
DevelopmentNote
Supersedes 05/30060689 DC. (07/2007)
DocumentType
Standard
Pages
86
PublisherName
British Standards Institution
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
EN 62282-3-1 : 2007 Identical
DIN EN 62282-3-1 : 2008 Identical
NF EN 62282-3-1 : 2007 Identical
I.S. EN 62282-3-1:2007 Identical
NBN EN 62282-3-1 : 2007 Identical
IEC 62282-3-1:2007 Identical

IEC 61025:2006 Fault tree analysis (FTA)
ISO/TR 15916:2015 Basic considerations for the safety of hydrogen systems
IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV Information technology equipment - Safety - Part 1: General requirements
EN 60812:2006 Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)
ISO 13707:2000 Petroleum and natural gas industries Reciprocating compressors
IEC 60079-10:2002 Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
ISO 15649:2001 Petroleum and natural gas industries — Piping
IEC 61000-6-4:2006+AMD1:2010 CSV ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
EN 61000-6-1:2007 Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments
IEC 60730-2-9:2015 RLV Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls
IEC 60384-14:2013+AMD1:2016 CSV Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
ISO 10442:2002 Petroleum, chemical and gas service industries Packaged, integrally geared centrifugal air compressors
EN ISO 10440-1:2007 Petroleum, petrochemical and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors (ISO 10440-1:2007)
EN ISO 10440-2:2001 Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2: Packaged air compressors (oil-free) (ISO 10440-2:2001)
IEC 60730-2-19:1997+AMD1:2000+AMD2:2007 CSV Automatic electrical controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements
EN 61000-6-3:2007/A1:2011/AC:2012 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010)
IEC TR 60079-20:1996 Electrical apparatus for explosive gas atmospheres - Part 20: Data for flammable gases and vapours, relating to the use of electrical apparatus
IEC 61511-1:2016+AMD1:2017 CSV Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements
IEC 61779-6:1999 Electrical apparatus for the detection and measurement of flammable gases - Part 6: Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases
IEC 61000-6-2:2016 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
IEC 60812:2006 Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)
ISO 3864-2:2016 Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels
ISO 13631:2002 Petroleum and natural gas industries Packaged reciprocating gas compressors
EN 60079-0:2012/A11:2013 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED)
ISO 4413:2010 Hydraulic fluid power General rules and safety requirements for systems and their components
EN 61000-3-3:2013 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION (IEC 61000-3-3:2013)
EN 60730-2-9:2010 Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls
EN 61779-4:2000 Electrical apparatus for the detection and measurement of flammable gases - Part 4: Performance requirements for group II apparatus indicating a volume fraction up to 100 % lower explosive limit
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN 60950-1:2006/A2:2013 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED)
EN ISO 13850:2015 Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
IEC 61000-6-1 : 3.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
IEC 62282-3-2:2006 Fuel cell technologies - Part 3-2: Stationary fuel cell power systems - Performance test methods
EN 62282-2:2012 Fuel cell technologies - Part 2: Fuel cell modules
IEC 60730-2-6:2015 Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
IEC 62282-2:2012 Fuel cell technologies - Part 2: Fuel cell modules
ISO 10440-2:2001 Petroleum and natural gas industries Rotary-type positive-displacement compressors Part 2: Packaged air compressors (oil-free)
ISO/TS 16528:2002 Boilers and pressure vessels Registration of Codes and Standards to promote international recognition
IEC TR 60079-16:1990 Electrical apparatus for explosive gas atmospheres. Part 16: Artificial ventilation for the protection of analyser(s) houses
IEC 60335-2-51:2002+AMD1:2008+AMD2:2011 CSV Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations
EN ISO 14847 : 1999 ROTARY POSITIVE DISPLACEMENT PUMPS - TECHNICAL REQUIREMENTS
EN ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009)
ISO 5388:1981 Stationary air compressors Safety rules and code of practice
IEC 61000-6-3:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
EN 60730-2-19:2002/A2:2008 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-19: PARTICULAR REQUIREMENTS FOR ELECTRICALLY OPERATED OIL VALVES, INCLUDING MECHANICAL REQUIREMENTS
EN ISO 13631:2002 Petroleum and natural gas industries - Packaged reciprocating gas compressors (ISO 13631:2002)
ISO/IEC Guide 51:2014 Safety aspects Guidelines for their inclusion in standards
ISO 14847:1999 Rotary positive displacement pumps Technical requirements
EN 60335-2-51:2003/A2:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-51: PARTICULAR REQUIREMENTS FOR STATIONARY CIRCULATION PUMPS FOR HEATING AND SERVICE WATER INSTALLATIONS (IEC 60335-2-51:2002/A2:2011)
EN 61511-3:2017 Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels
IEC 61779-4:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 4: Performance requirements for group II apparatus indicating up to 100% lower explosive limit
EN 62282-3-2:2006 Fuel cell technologies - Part 3-2: Stationary fuel cell power systems - Performance test methods
EN ISO 10442:2002 Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors (ISO 10442:2002)
IEC 61511-3:2016 Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels
EN 61000-6-2:2005/corrigendum:2005 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005)
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
EN 61000-6-4:2007/A1:2011 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
IEC GUIDE 104:2010 The preparation of safety publications and the use of basic safety publications and group safety publications
EN 61025:2007 Fault tree analysis (FTA)
ISO 14121:1999 Safety of machinery Principles of risk assessment
IEC TS 61000-3-4:1998 Electromagnetic compatibility (EMC) - Part 3-4: Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A
IEC 60079-0:2011 Explosive atmospheres - Part 0: Equipment - General requirements
EN 60079-10:2003 Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
IEC 61000-3-3:2013 RLV Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
EN 61000-3-2:2014 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
IEC 61000-6-1:2016 Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments
IEC 60730-2-5:2013+AMD1:2017 CSV Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems
IEC 62086-1:2001 Electrical apparatus for explosive gas atmospheres - Electrical resistance trace heating - Part 1: General and testing requirements
IEC 61000-6-4:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
IEC 60300-3-9:1995 Dependability management - Part 3: Application guide - Section 9: Risk analysis of technological systems
ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries
EN 62086-1:2005 Electrical apparatus for explosive gas atmospheres - Electrical resistance trace heating - Part 1: General and testing requirements
ISO 10440-1:2007 Petroleum, petrochemical and natural gas industries — Rotary-type positive-displacement compressors — Part 1: Process compressors
IEC 61000-3-3 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION
ISO 4414:2010 Pneumatic fluid power General rules and safety requirements for systems and their components
ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
EN 60335-1:2012/A13:2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
EN 60730-2-5:2015 Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
IEC 60730-2-17:1997+AMD1:2000+AMD2:2007 CSV Automatic electrical controls for household and similar use - Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements
IEC 61000-6-2 : 3.0:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
ISO/IEC Guide 7:1994 Guidelines for drafting of standards suitable for use for conformity assessment
EN ISO 10439:2002 Petroleum, chemical and gas service industries - Centrifugal compressors (ISO 10439:2002)
EN 60730-1:2016 Automatic electrical controls - Part 1: General requirements
EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
IEC 61000-3-2 : 4.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE)
IEC 60730-1:2013+AMD1:2015 CSV Automatic electrical controls - Part 1: General requirements
ISO 10439:2002 Petroleum, chemical and gas service industries Centrifugal compressors

View more information
€325.62
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.