BS EN 62575-1 : 2016

Current

Current The latest, up-to-date edition.

RADIO FREQUENCY (RF) BULK ACOUSTIC WAVE (BAW) FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION

Available format(s): Hardcopy, PDF

Language(s): English

Published date: 01-01-2016

Publisher: British Standards Institution

Table of Contents - (Show below) - (Hide below)

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions, units and symbols
4 Preferred values for ratings and characteristics
5 Marking
6 Quality assessment procedures
7 Test and measurement procedures
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications

Abstract - (Show below) - (Hide below)

Defines the methods of test and general requirements for RF BAW filters of assessed quality using either capability approval or qualification approval procedures.

General Product Information - (Show below) - (Hide below)

Committee	EPL/49
Development Note	Supersedes 12/30258507 DC. (03/2016)
Document Type	Standard
ISBN
Pages
Published
Publisher	British Standards Institution
Status	Current
Supersedes	12/30258507 DC : 0

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
EN 62575-1 : 2016	Identical
IEC 62575-1 : 1ED 2015	Identical

Standards Referencing This Book - (Show below) - (Hide below)

EN 60862-1 : 2015	SURFACE ACOUSTIC WAVE (SAW) FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION (IEC 60862-1:2015)
IEC 60749-28 : 1ED 2017	SEMICONDUCTOR DEVICES - MECHANICAL AND CLIMATIC TEST METHODS - PART 28: ELECTROSTATIC DISCHARGE (ESD) SENSITIVITY TESTING - CHARGED DEVICE MODEL (CDM) - DEVICE LEVEL
EN 62604-1 : 2015	SURFACE ACOUSTIC WAVE (SAW) AND BULK ACOUSTIC WAVE (BAW) DUPLEXERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION (IEC 62604-1:2015)
EN ISO 80000-1 : 2013	QUANTITIES AND UNITS - PART 1: GENERAL (ISO 80000-1:2009 + COR 1:2011)
IEC 60068-1 : 7.0	ENVIRONMENTAL TESTING - PART 1: GENERAL AND GUIDANCE
IEC 60068-2-58 : 4.1	ENVIRONMENTAL TESTING - PART 2-58: TESTS - TEST TD: TEST METHODS FOR SOLDERABILITY, RESISTANCE TO DISSOLUTION OF METALLIZATION AND TO SOLDERING HEAT OF SURFACE MOUNTING DEVICES (SMD)
IEC 60068-2-27 : 4.0:2008	ENVIRONMENTAL TESTING - PART 2-27: TESTS - TEST EA AND GUIDANCE: SHOCK
EN 60068-2-1 : 2007	ENVIRONMENTAL TESTING - PART 2-1: TESTS - TEST A: COLD
EN 60068-2-2 : 2007	ENVIRONMENTAL TESTING - PART 2-2: TESTS - TEST B: DRY HEAT
IEC 60068-2-21 : 6.0	ENVIRONMENTAL TESTING - PART 2-21: TESTS - TEST U: ROBUSTNESS OF TERMINATIONS AND INTEGRAL MOUNTING DEVICES
IEC 60068-2-13 : 4.0	ENVIRONMENTAL TESTING - PART 2: TESTS - TEST M: LOW AIR PRESSURE
EN 60068-1 : 2014	ENVIRONMENTAL TESTING - PART 1: GENERAL AND GUIDANCE (IEC 60068-1:2013)
EN 60068-2-64 : 2008	ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE
EN 61000-4-2 : 2009	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST
EN 60068-2-7 : 1993	ENVIRONMENTAL TESTING - TESTS - TEST GA AND GUIDANCE: ACCELERATION, STEADY STATE
IEC 60068-2-31 : 2.0:2008	ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS
IEC 60068-2-64 : 2.0	ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE
IEC 62604-1 : 1ED 2015	SURFACE ACOUSTIC WAVE (SAW) AND BULK ACOUSTIC WAVE (BAW) DUPLEXERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
EN 60068-2-27 : 2009	ENVIRONMENTAL TESTING - PART 2-27: TESTS - TEST EA AND GUIDANCE: SHOCK
IEC 60862-1 : 3.0	SURFACE ACOUSTIC WAVE (SAW) FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
EN 61340-3-2 : 2007	ELECTROSTATICS - PART 3-2: METHODS FOR SIMULATION OF ELECTROSTATIC EFFECTS - MACHINE MODEL (MM) ELECTROSTATIC DISCHARGE TEST WAVEFORMS
EN 60068-2-17 : 1994	BASIC ENVIRONMENTAL TESTING - TEST Q: SEALING
IEC 60068-2-17 : 4.0	ENVIRONMENTAL TESTING - TEST Q: SEALING
EN 60068-2-21 : 2006	ENVIRONMENTAL TESTING - PART 2-21: TESTS - TEST U: ROBUSTNESS OF TERMINATIONS AND INTEGRAL MOUNTING DEVICES
IEC 60068-2-2 : 5.0:2007	ENVIRONMENTAL TESTING - PART 2-2: TESTS - TEST B: DRY HEAT
IEC 61000-4-2 : 2.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST
EN 61340-3-1 : 2007	ELECTROSTATICS - PART 3-1: METHODS FOR SIMULATION OF ELECTROSTATIC EFFECTS - HUMAN BODY MODEL (HBM) ELECTROSTATIC DISCHARGE TEST WAVEFORMS
ISO 80000-1 : 2009	QUANTITIES AND UNITS - PART 1: GENERAL
IEC 61340-3-1 : 2.0	ELECTROSTATICS - PART 3-1: METHODS FOR SIMULATION OF ELECTROSTATIC EFFECTS - HUMAN BODY MODEL (HBM) ELECTROSTATIC DISCHARGE TEST WAVEFORMS
IEC 61340-3-2 : 2.0	ELECTROSTATICS - PART 3-2: METHODS FOR SIMULATION OF ELECTROSTATIC EFFECTS - MACHINE MODEL (MM) ELECTROSTATIC DISCHARGE TEST WAVEFORMS
EN 60068-2-78 : 2013	ENVIRONMENTAL TESTING - PART 2-78: TESTS - TEST CAB: DAMP HEAT, STEADY STATE (IEC 60068-2-78:2012)
EN 60068-2-13 : 1999	ENVIRONMENTAL TESTING - PART 2: TESTS - TEST M: LOW AIR PRESSURE
EN 60068-2-6 : 2008	ENVIRONMENTAL TESTING - PART 2-6: TESTS - TEST FC: VIBRATION (SINUSOIDAL)
IEC 60050-561 : 2.0	INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 561: PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC DEVICES AND ASSOCIATED MATERIALS FOR FREQUENCY CONTROL, SELECTION AND DETECTION
IEC 60122-1 : 3.0	QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
IEC 60068-2-1 : 6.0:2007	ENVIRONMENTAL TESTING - PART 2-1: TESTS - TEST A: COLD
EN 60068-2-30 : 2005	ENVIRONMENTAL TESTING - PART 2-30: TESTS - TEST DB: DAMP HEAT, CYCLIC (12 H + 12 H CYCLE)
EN 60695-11-5 : 2017	FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE (IEC 60695-11-5:2016)
IEC 60068-2-6 : 0	ENVIRONMENTAL TESTING - PART 2-6: TESTS - TEST FC: VIBRATION (SINUSOIDAL)
IEC 60695-11-5 : 2.0	FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
IEC 60068-2-14 : 6.0	ENVIRONMENTAL TESTING - PART 2-14: TESTS - TEST N: CHANGE OF TEMPERATURE
EN 60068-2-45 : 92 AMD 1 93	BASIC SAFETY PUBLICATION - ENVIRONMENTAL TESTING - PART 2: TEST METHODS TEST XA AND GUIDANCE: IMMERSION IN CLEANING SOLVENTS
EN 60068-2-14 : 2009	ENVIRONMENTAL TESTING - PART 2-14: TESTS - TEST N: CHANGE OF TEMPERATURE
IEC 60068-2-52 : 3.0	ENVIRONMENTAL TESTING - PART 2-52: TESTS - TEST KB: SALT MIST, CYCLIC (SODIUM CHLORIDE SOLUTION)
EN 60068-2-31 : 2008	ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS
IEC 60068-2-30 : 3.0:2005	ENVIRONMENTAL TESTING - PART 2-30: TESTS - TEST DB: DAMP HEAT, CYCLIC (12 H + 12 H CYCLE)
EN 60749-28 : 2017	SEMICONDUCTOR DEVICES - MECHANICAL AND CLIMATIC TEST METHODS - PART 28: ELECTROSTATIC DISCHARGE (ESD) SENSITIVITY TESTING - CHARGED DEVICE MODEL (CDM) - DEVICE LEVEL (IEC 60749-28:2017)

Add To Cart

Product Format

Quantity

add to cart

BS EN 62575-1 : 2016

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Looking for Subscription Services?