BS EN 942:2007
Current
The latest, up-to-date edition.
Timber in joinery. General requirements
Hardcopy , PDF
English
30-03-2007
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Basic principles
4.1 Appearance classes
4.2 Species
4.3 Density
4.4 Growth rings
4.5 Surface quality
4.6 Moisture content
4.7 Finger-jointing, butt-jointing, edge-jointing and
laminating
5 Classification of features
5.1 General
5.2 Knots and knot clusters
5.2.1 Types
5.2.2 Size
5.2.3 Distribution
6 Remedial work
6.1 Plugs and fillers
6.2 Requirements
Annex A (normative) Measurement of dimensions of finished
pieces
Annex B (informative) Guide to moisture content in joinery
Annex C (informative) Guide to specifying timber in joinery
C.1 information to be supplied
C.2 Identifying characteristics, techniques or remedies
and their acceptability with visible surfaces
Annex D (informative) The selection of timber species for use
in joinery
D.1 General
D.2 Aesthetic criteria
D.3 Commercial criteria
D.4 Mechanical criteria
D.5 Durability criteria
D.6 Serviceability criteria
D.7 Workability criteria
National annex NA (informative) Some species and their
suitability for use in joinery
Bibliography
Describes the general requirements including in particular the grading and classification by appearance quality of timber in joinery products or individual joinery parts.
| Committee |
B/543
|
| DevelopmentNote |
Supersedes BS 1186-1(1991) and 92/19798 DC (09/2005)
|
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This European Standard specifies the general requirements including in particular the grading and classification by appearance quality of timber in joinery products or individual joinery parts. This European Standard is intended to be used at the time of manufacture of a product. However this Standard may be used to evaluate products at a later stage, but in these situations storage and service conditions, subsequent to manufacture, shall be taken into account (surface checks). Where European product standards exist their timber requirements shall take precedence, unless an alternative improved specification is given as identified in Annex D. If reference to this European Standard is made the specific grade and requirements shall be identified. This European Standard covers solid, finger-jointed, end-jointed, edge-jointed and laminated timber products. Matters relating to the influence of timber characteristics on strength and durability are not covered in this Standard.
| Standards | Relationship |
| NBN EN 942 : 2007 | Identical |
| NF EN 942 : 2007 | Identical |
| DIN EN 942:2007-06 | Identical |
| UNI EN 942 : 2007 | Identical |
| I.S. EN 942:2007 | Identical |
| SN EN 942 : 2007 | Identical |
| UNE-EN 942:2007 | Identical |
| NS EN 942 : 2ED 2007 | Identical |
| NEN EN 942 : 2007 | Identical |
| EN 942:2007 | Identical |
| 16/30332500 DC : 0 | BS 8214 - TIMBER-BASED FIRE DOOR ASSEMBLIES - CODE OF PRACTICE |
| 14/30277336 DC : 0 | BS 8605-1 - EXTERNAL TIMBER CLADDING - PART 1: METHOD OF SPECIFYING |
| 09/30196835 DC : 0 | BS 8529 - COMPOSITE DOORSETS - DOMESTIC EXTERNAL DOORSETS - SPECIFICATION |
| 08/30143158 DC : DRAFT AUG 2008 | BS 644 - TIMBER WINDOWS - FULLY FINISHED FACTORY ASSEMBLED WINDOWS OF VARIOUS TYPES - SPECIFICATION |
| BS 8214:2016 | Timber-based fire door assemblies. Code of practice |
| BS 8529:2010 | Composite doorsets. Domestic external doorsets. Specification |
| BS 8214:2008 | Code of practice for fire door assemblies |
| BS 4873:2004 | Aluminium alloy windows |
| BS 4873:2016 | Aluminium alloy windows and doorsets. Specification |
| BS 8605-1:2014 | External timber cladding Method of specifying |
| BS 8529:2017 | Composite doorsets. Domestic external doorsets, Specification |
| 16/30339191 DC : 0 | BS 8529 - COMPOSITE DOORSETS - DOMESTIC EXTERNAL DOORSETS - SPECIFICATION |
| BS 5628-3:2005 | Code of practice for the use of masonry Materials and components, design and workmanship |
| BS 5628-3:2001 | Code of practice for use of masonry Materials and components, design and workmanship |
| BS 8220-1:2000 | Guide for security of buildings against crime Dwellings |
| BS 1186-2:1988 | Timber for and workmanship in joinery Specification for workmanship |
| BS 644:2012 | Timber windows and doorsets. Fully finished factory-assembled windows and doorsets of various types. Specification |
| BS 644:2009 | Timber windows. Fully finished factory-assembled windows of various types. Specification |
| BS 5395-1:2000 | Stairs, ladders and walkways Code of practice for the design, construction and maintenance of straight stairs and winders |
| 10/30168896 DC : 0 | PD 6697 - RECOMMENDATIONS FOR THE DESIGN OF MASONRY STRUCTURES TO BS EN 1996-1-1 AND BS EN 1996-2 |
| 12/30263952 DC : 0 | BS EN 61048:2006+A1 - AUXILIARIES FOR LAMPS - CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - GENERAL AND SAFETY REQUIREMENTS |
| 12/30218393 DC : 0 | BS 644 - TIMBER WINDOWS AND DOORSETS - FULLY FINISHED FACTORY-ASSEMBLED WINDOWS AND DOORSETS OF VARIOUS TYPES - SPECIFICATION |
| BS 8220-3:2004 | Guide for security of buildings against crime Storage, industrial and distribution premises |
| 05/30131954 DC : DRAFT APR 2005 | BS 5628-3 - CODE OF PRACTICE FOR THE USE OF MASONRY - PART 3: MATERIALS AND COMPONENTS, DESIGN AND WORKMANSHIP |
| 08/30143160 DC : DRAFT AUG 2008 | BS 4873 - ALUMINIUM ALLOY WINDOWS AND DOOR SETS - SPECIFICATION |
| 15/30318434 DC : 0 | BS 4873 - ALUMINIUM ALLOY WINDOWS AND DOORSETS - SPECIFICATION |
| BS 1186-3:1990 | Timber for and workmanship in joinery Specification for wood trim and its fixing |
| BS PAS 23-1(1999) : 1999 | GENERAL PERFORMANCE REQUIREMENTS FOR DOOR ASSEMBLIES - PART 1: SINGLE LEAF, EXTERNAL DOOR ASSEMBLIES TO DWELLINGS |
| BS 644:2003 | Timber windows. Factory assembled windows of various types. Specification |
| PD 6697:2010 | Recommendations for the design of masonry structures to BS EN 1996-1-1 and BS EN 1996-2 |
| BS 4873:2009 | Aluminium alloy windows and doorsets. Specification |
| EN 1310:1997 | Round and sawn timber - Method of measurement of features |
| EN 13183-3:2005 | Moisture content of a piece of sawn timber - Part 3: Estimation by capacitance method |
| EN 335-2:2006 | Durability of wood and wood-based products - Definition of use classes - Part 2: Application to solid wood |
| EN 14220:2006 | Timber and wood-based materials in external windows, external door leaves and external doorframes - Requirements and specifications |
| EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 13307-1:2006 | Timber blanks and semi-finished profiles for non-structural uses - Part 1: Requirements |
| EN 351-1:2007 | Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention |
| EN 13556:2003 | Round and sawn timber - Nomenclature of timbers used in Europe |
| EN 350-2:1994 | Durability of wood and wood-based products - Natural durability of solid wood - Part 2: Guide to natural durability and treatability of selected wood species of importance in Europe |
| EN 844-3:1995 | Round and sawn timber - Terminology - Part 3: General terms relating to sawn timber |
| EN 14221:2006 | Timber and wood-based materials in internal windows, internal door leaves and internal doorframes - Requirements and specifications |
| EN 460:1994 | Durability of wood and wood-based products - Natural durability of solid wood - Guide to the durability requirements for wood to be used in hazard classes |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.