IEC 60243-1:2013
|
Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies |
IEC 60695-11-20:2015
|
Fire hazard testing - Part 11-20: Test flames - 500 W flame test method |
IEC 60112:2003+AMD1:2009 CSV
|
Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
ISO 75-1:2013
|
Plastics Determination of temperature of deflection under load Part 1: General test method |
ISO 10350-2:2011
|
Plastics Acquisition and presentation of comparable single-point data Part 2: Long-fibre-reinforced plastics |
ISO 6603-2:2000
|
Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing |
ISO 3915:1981
|
Plastics — Measurement of resistivity of conductive plastics |
ISO 293:2004
|
Plastics — Compression moulding of test specimens of thermoplastic materials |
ISO 3167:2014
|
Plastics Multipurpose test specimens |
IEC 60250:1969
|
Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths |
ISO 11403-3:2014
|
Plastics Acquisition and presentation of comparable multipoint data Part 3: Environmental influences on properties |
ISO 294-3:2002
|
Plastics Injection moulding of test specimens of thermoplastic materials Part 3: Small plates |
ISO 1133-1:2011
|
Plastics Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 1: Standard method |
ISO 295:2004
|
Plastics — Compression moulding of test specimens of thermosetting materials |
IEC 62631-3-2:2015
|
Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC methods) - Surface resistance and surface resistivity |
ISO 10724-1:1998
|
Plastics — Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) — Part 1: General principles and moulding of multipurpose test specimens |
ISO 8256:2004
|
Plastics — Determination of tensile-impact strength |
ISO 11359-2:1999
|
Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature |
IEC 62631-3-1:2016
|
Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method |
ISO 75-2:2013
|
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite |
ISO 527-2:2012
|
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
ISO 11357-3:2011
|
Plastics Differential scanning calorimetry (DSC) Part 3: Determination of temperature and enthalpy of melting and crystallization |
ISO 11357-2:2013
|
Plastics Differential scanning calorimetry (DSC) Part 2: Determination of glass transition temperature and glass transition step height |
ISO 11403-2:2012
|
Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties |
IEC 60296:2012 RLV
|
Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
ISO 294-4:2001
|
Plastics Injection moulding of test specimens of thermoplastic materials Part 4: Determination of moulding shrinkage |
ISO 2577:2007
|
Plastics Thermosetting moulding materials Determination of shrinkage |
IEC 60695-11-10:2013
|
Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
ISO 1183-1:2012
|
Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
ISO 1183-2:2004
|
Plastics Methods for determining the density of non-cellular plastics Part 2: Density gradient column method |
ISO 1183-3:1999
|
Plastics Methods for determining the density of non-cellular plastics Part 3: Gas pyknometer method |
ISO 291:2008
|
Plastics Standard atmospheres for conditioning and testing |
ISO 179-1:2010
|
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
ISO 62:2008
|
Plastics Determination of water absorption |
ISO 306:2013
|
Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) |
ISO 294-1:2017
|
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens |
ISO 4589-2:2017
|
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test |
ISO 2818:1994
|
Plastics — Preparation of test specimens by machining |
ISO 1133-2:2011
|
Plastics Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 2: Method for materials sensitive to time-temperature history and/or moisture |
ISO 899-1:2017
|
Plastics — Determination of creep behaviour — Part 1: Tensile creep |
ISO 11403-1:2014
|
Plastics Acquisition and presentation of comparable multipoint data Part 1: Mechanical properties |
ISO 20753:2008
|
Plastics Test specimens |
ISO 178:2010
|
Plastics Determination of flexural properties |
ISO 527-1:2012
|
Plastics Determination of tensile properties Part 1: General principles |
ISO 10724-2:1998
|
Plastics — Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) — Part 2: Small plates |