BS EN ISO 12216:2002
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Small craft. Windows, portlights, hatches, deadlights and doors. Strength and watertightness requirements
Hardcopy , PDF
24-10-2018
English
16-09-2002
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
4.1 General
4.2 Strength
4.3 Positive closure
4.4 Watertightness
4.4.1 Minimum degree of watertightness
4.4.2 Additional requirements related to
watertightness
5 Plate materials
5.1 General
5.2 Acrylic sheet materials
5.3 Glass
5.3.1 Restrictions of usage
6 Specific requirements
6.1 End connection and location of plate
6.1.1 Simply supported plates
6.1.2 Semi-fixed plates
6.2 Fastening requirements
6.2.1 Fastening of plates and frames
6.2.2 Fastening of semi-fixed plates
6.2.3 Fastening of glued plates
6.3 Special requirements
6.3.1 Appliances fitted in Area 1
6.3.2 Appliances fitted in Area 2 a
6.3.3 Sliding appliances
6.3.4 Doors made with removable sections: washboards
6.3.5 Locking system
6.3.6 Deadlights
6.3.7 Multihull escape hatches
6.3.8 Commercially available appliances
7 Scantling determination of non-stiffened plates
7.1 Monolithic plate thickness determination
7.1.1 Determination based on allowable stress criterion
7.1.2 Determination based on allowable deflection
criterion
7.1.3 Applicability of 7.1.1 and 7.1.2
7.2 Selection of monolithic plate thickness
7.3 Plate aspect-ratio coefficients, k[r] and k[f]
7.4 Basic design pressure
7.5 Pressure reduction factor
7.6 Curvature coefficient
7.7 Flexural strength and modulus of elasticity
7.8 Safety factor and minimum plate thickness
7.9 Laminated glass thickness
8 Sandwich plates, stiffened and/or supported plates
Annex A (normative) Appliance location areas
Annex B (normative) Types of plate edge connection
Annex C (normative) Unsupported plate dimensions
Annex D (normative) Method of test
Annex E (normative) High-impact-resistance glass
Annex F (informative) Precalculated tables
Annex G (informative) Background information
Bibliography
Gives technical requirements for windows, portlights, hatches, deadlights and doors on small craft of hull length up to 24 m, taking into account the type of craft, its design category, and the location of the appliance.
| Committee |
GME/33
|
| DevelopmentNote |
Supersedes 94/714897 DC (10/2002) Reviewed and confirmed by BSI, November 2007. (10/2007)
|
| DocumentType |
Standard
|
| Pages |
76
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| I.S. EN ISO 12216:2002 | Identical |
| EN ISO 12216:2002 | Identical |
| UNI EN ISO 12216 : 2004 | Identical |
| NBN EN ISO 12216 : 2002 | Identical |
| UNE-EN ISO 12216:2003 | Identical |
| NEN EN ISO 12216 : 2002 | Identical |
| NS EN ISO 12216 : 1ED 2002 | Identical |
| SN EN ISO 12216 : 2002 | Identical |
| ONORM EN ISO 12216 : 2002 | Identical |
| DIN EN ISO 12216:2002-10 | Identical |
| NF EN ISO 12216 : 2002 | Identical |
| ISO 12216:2002 | Identical |
| 04/30085219 DC : DRAFT SEP 2004 | BS 8435 - SMALL CRAFT - RESERVE FLOTATION - BOATS UP TO 6 METRES LENGTH OF HULL |
| BS 8435:2005 | Small craft. Reserve flotation. Boats up to six metres length of hull |
| ISO 9094-1:2003 | Small craft Fire protection Part 1: Craft with a hull length of up to and including 15 m |
| EN ISO 11812:2001 | Small craft - Watertight cockpits and quick-draining cockpits (ISO 11812:2001) |
| ISO 9094-2:2002 | Small craft Fire protection Part 2: Craft with a hull length of over 15 m |
| ISO 6603-1:2000 | Plastics Determination of puncture impact behaviour of rigid plastics Part 1: Non-instrumented impact testing |
| EN 1523:1998 | Windows, doors, shutters and blinds - Bullet resistance - Test method |
| ISO/TR 15510:1997 | Stainless steels Chemical composition |
| 1994/25/EC : 1994 | DIRECTIVE 94/25/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 16 JUNE 1994 ON THE APPROXIMATION OF THE LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO RECREATIONAL CRAFT |
| ISO 8666:2016 | Small craft Principal data |
| ISO 7823-1:2003 | Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets |
| EN ISO 6603-1:2000 | Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing (ISO 6603-1:2000) |
| EN 1063:1999 | Glass in building - Security glazing - Testing and classification of resistance against bullet attack |
| ISO 11812:2001 | Small craft Watertight cockpits and quick-draining cockpits |
| EN 356:1999 | Glass in building - Security glazing - Testing and classification of resistance against manual attack |
| EN 1522:1998 | Windows, doors, shutters and blinds - Bullet resistance - Requirements and classification |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.