IEC 60243-1:2013
|
Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies |
IEC 60695-11-20:2015
|
Fire hazard testing - Part 11-20: Test flames - 500 W flame test method |
IEC 60112:2003+AMD1:2009 CSV
|
Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
ISO 6603-2:2000
|
Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing |
ISO 3671:1976
|
Plastics — Aminoplastic moulding materials — Determination of volatile matter |
ISO 3167:2014
|
Plastics Multipurpose test specimens |
IEC 60250:1969
|
Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths |
ISO 171:1980
|
Plastics — Determination of bulk factor of moulding materials |
ISO 120:1977
|
Plastics Phenol-formaldehyde mouldings Determination of free ammonia and ammonium compounds Colorimetric comparison method |
ISO 295:2004
|
Plastics — Compression moulding of test specimens of thermosetting materials |
ISO 10350-1:2017
|
Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials |
ISO 2039-1:2001
|
Plastics Determination of hardness Part 1: Ball indentation method |
ISO 10724-1:1998
|
Plastics — Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) — Part 1: General principles and moulding of multipurpose test specimens |
ISO 8256:2004
|
Plastics — Determination of tensile-impact strength |
ISO 11359-2:1999
|
Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature |
ISO 60:1977
|
Plastics — Determination of apparent density of material that can be poured from a specified funnel |
ISO 75-2:2013
|
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite |
ISO 527-2:2012
|
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
IEC 60167:1964
|
Methods of test for the determination of the insulation resistance of solid insulating materials |
ISO 1183:1987
|
Plastics Methods for determining the density and relative density of non-cellular plastics |
IEC 60296:2012 RLV
|
Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
IEC 60707:1999
|
Flammability of solid non-metallic materials when exposed to flame sources - List of test methods |
IEC 60093:1980
|
Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials |
ISO 472:2013
|
Plastics Vocabulary |
ISO 2577:2007
|
Plastics Thermosetting moulding materials Determination of shrinkage |
IEC 60695-11-10:2013
|
Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
ISO 291:2008
|
Plastics Standard atmospheres for conditioning and testing |
ISO 62:2008
|
Plastics Determination of water absorption |
ISO 7808:1992
|
Plastics — Thermosetting moulding materials — Determination of transfer flow |
ISO 4589-2:2017
|
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test |
ISO 2818:1994
|
Plastics — Preparation of test specimens by machining |
ISO 899-1:2017
|
Plastics — Determination of creep behaviour — Part 1: Tensile creep |
ISO 4614:1977
|
Plastics Melamine-formaldehyde mouldings Determination of extractable formaldehyde |
ISO 15252-1:1999
|
Plastics Epoxy powder moulding compounds (EP-PMCs) Part 1: Designation system and basis for specifications |
ISO 178:2010
|
Plastics Determination of flexural properties |
ISO 15252-3:1999
|
Plastics Epoxy powder moulding compounds (EP-PMCs) Part 3: Requirements for selected moulding compounds |
ISO 527-1:2012
|
Plastics Determination of tensile properties Part 1: General principles |
ISO 10724-2:1998
|
Plastics — Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) — Part 2: Small plates |