BS EN ISO 15681-2:2004
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Water quality. Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) Method by continuous flow analysis (CFA)
Hardcopy , PDF
19-12-2018
English
08-03-2005
Foreword
Introduction
1 Scope
2 Normative references
3 Interferences
3.1 General interferences
3.2 Interferences in the determination of total-P
4 Principle
4.1 Determination of orthophosphate
4.2 Total phosphorus with manual digestion
4.3 Total phosphorus with integral UV digestion and
hydrolysis
5 Reagents
6 Apparatus
6.1 Continuous-flow analysis (CFA)
6.2 Additional apparatus
6.3 Additional apparatus for the determination of total
phosphorus after integral digestion
7 Sampling and sample preparation
8 Procedure
8.1 Preparation for analysis
8.2 Instrument performance check
8.3 Reagent blank check
8.4 Calibration
8.5 Check of UV digestion and hydrolysis for total
P determination
8.6 Measurement
8.7 Closing down the system
9 Calculation of results
10 Expression of results
11 Test report
Annex A (informative) Examples of a CFA system
Annex B (informative) Precision and accuracy
Annex C (informative) Determination of orthophosphate-P
and total-P by CFA and tin(II)
chloride reduction
Bibliography
Defines CFA methods for the determination of orthophosphate in the mass concentration range from 0,01 mg/l to 1,00 mg/l P, and total phosphorus in the mass concentration range from 0,10 mg/l to 10,0 mg/l P.
Committee |
EH/3/2
|
DevelopmentNote |
Renumbers and supersedes BS ISO 15681-2 Supersedes BS 6068-2.87(2003) and 01/562318 DC Also numbered as BS 6068-2.87(2004) 2004 version incorporates amendment 15546 to BS ISO 15681-2 (03/2005) Reviewed and confirmed by BSI, July 2009. (06/2009)
|
DocumentType |
Standard
|
Pages |
28
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
NF EN ISO 15681-2 : 2005 | Identical |
ISO 15681-2:2003 | Identical |
NBN EN ISO 15681-2 : 2005 | Identical |
EN ISO 15681-2:2004 | Identical |
I.S. EN ISO 15681-2:2005 | Identical |
NEN EN ISO 15681-2 : 2005 | Identical |
DIN EN ISO 15681-2:2005-05 | Identical |
UNE-EN ISO 15681-2:2005 | Identical |
UNI EN ISO 15681-2 : 2005 | Identical |
SN EN ISO 15681-2 : 2005 | Identical |
ONORM EN ISO 15681-2 : 2005 | Identical |
NS EN ISO 15681-2 : 1ED 2005 | Identical |
BS PAS 61(2006) : 2006 | DETERMINATION OF PRIORITY POLLUTANTS IN SURFACE WATER USING PASSIVE SAMPLING |
ISO 5667-2:1991 | Water quality Sampling Part 2: Guidance on sampling techniques |
ISO 5667-3:2012 | Water quality Sampling Part 3: Preservation and handling of water samples |
ISO 5667-1:2006 | Water quality Sampling Part 1: Guidance on the design of sampling programmes and sampling techniques |
ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
ISO 8466-1:1990 | Water quality Calibration and evaluation of analytical methods and estimation of performance characteristics Part 1: Statistical evaluation of the linear calibration function |
ISO 6878:2004 | Water quality — Determination of phosphorus — Ammonium molybdate spectrometric method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.