BS ISO 16412:2005
Current
The latest, up-to-date edition.
Air cargo equipment. Air cargo pallets. Utilization guidelines
Hardcopy , PDF
English
28-02-2006
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
4.1 General
4.2 Mass
4.3 Area load
4.4 Running load
4.5 CG location (plan view)
4.6 CG location (height)
4.7 Contour
5 Installation
5.1 Condition check
5.2 Cargo stacking
5.3 Shifting protection
5.4 Net installation
6 Shoring
6.1 General
6.2 Methods
6.3 Computation
7 Restraint
7.1 Net restraint
7.2 Straps complement
7.3 Straps tie-down
8 Specific commodities
8.1 General
8.2 Overhangs
8.3 Long loads
8.4 "Tall" loads
8.5 Drums, cans, barrels
8.6 Reels, spools
8.7 Dangerous goods
9 Pallet accessories
9.1 Pallet covers
9.2 Pallet extenders
9.3 Pallet couplings
9.4 Other accessories
10 Operator requirements
10.1 General
10.2 Operating instructions
10.3 Training and qualification
10.4 Quality control
Bibliography
Gives utilization guidelines to be applied when preparing air cargo pallets for carriage on board civil transport aircraft. Identifies the various concerns to be taken into consideration to ensure flight safety, and provides recognized industry standard methods to achieve it.
Committee |
ACE/57
|
DevelopmentNote |
Supersedes 03/305172 DC. (03/2006)
|
DocumentType |
Standard
|
Pages |
32
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
This International Standard specifies utilization guidelines to be applied when preparing air cargo pallets for carriage on board civil transport aircraft. It identifies the various concerns to be taken into consideration to ensure flight safety, and provides recognized industry standard methods to achieve it. Commercial requirements in order to ensure protection of the goods carried may also be addressed where applicable, but do not constitute the document’s primary goal. It is intended as a guide toward standard practice, and is subject to change to keep pace with experience and technical advances.
NOTE In all countries, standing government regulations apply to air cargo unit load devices airworthiness, continuous airworthiness, and air carriers (operators) certification and operations. This International Standard does not, under any circumstance, supersede the requirements of applicable regulations or the aircraft manufacturer’s authority approved weight and balance manual.
This International Standard is applicable to any certified air cargo pallet built up from either a single or a number of pieces of commercial cargo, intended to be loaded on lower, main or upper deck of a civil transport aircraft, whether a freighter or a passenger-carrying aircraft. Its field of application includes all pallets prepared within ground premises, whether at a shipper’s facilities or an airport cargo warehouse, including those intended to be loaded into the aircraft in a “floating” position. Its provisions may not entirely apply in the event of “pre-embarked” pallets. In such a case, it is up to the operator to identify and implement the applicable criteria.
This International Standard is not intended to apply to air cargo pallets prepared for military transport aircraft, and does not take into account any specific criteria for military aircraft. Nothing, however, precludes it being used for guidelines in this case, it being the military operator\'s responsibility to identify and implement any additional applicable criteria.
Standards | Relationship |
ISO 16412:2005 | Identical |
SAE ARP 5596 : 2005(S2012) | CARGO SHORING GUIDELINES |
ISO 8097:2001 | Aircraft — Minimum airworthiness requirements and test conditions for certified air cargo unit load devices |
SAE AS 1130 : 2002(S2013) | AIR AND AIR/SURFACE (PLATFORM) CARGO PALLETS |
ISO 4170:1995 | Air cargo equipment — Interline pallet nets |
SAE AS 1491 : 2012 | INTERLINE AIR CARGO PALLETS |
ISO 11241:1994 | Aircraft — Aircraft engine transport devices |
ISO 8268:1987 | Air cargo equipment — Automobile transport devices — Basic requirements |
ISO 4117:1993 | Air and air/land cargo pallets — Specification and testing |
SAE ARP 5595 : 2011 | CARGO RESTRAINT STRAPS - UTILIZATION GUIDELINES |
ISO 4171:1993 | Air cargo equipment — Interline pallets |
SAE AS 1131C : 2012(R2018) | AIR AND AIR/SURFACE (PLATFORM) CARGO PALLET NETS |
ISO 9469:1991 | Air cargo equipment — Unit load devices for transportation of horses |
SAE AS 1492 : 2012 | INTERLINE AIR CARGO PALLET NETS |
ISO 4115:1997 | Air cargo equipment — Air/land pallet nets |
SAE AS 5385 : 2012 | CARGO RESTRAINT STRAPS - DESIGN CRITERIA AND TESTING METHODS |
SAE AS 1825 : 2014 | METHODOLOGY OF CALCULATING AIRCRAFT CARGO VOLUMES |
ISO 9001:2015 | Quality management systems — Requirements |
ISO 16049-1:2013 | Air cargo equipment Restraint straps Part 1: Design criteria and testing methods |
SAE AS 36100 : 2016 | AIR CARGO UNIT LOAD DEVICES - PERFORMANCE REQUIREMENTS AND TEST PARAMETERS |
ISO 16049-2:2013 | Air cargo equipment Restraint straps Part 2: Utilization guidelines and lashing calculations |
ISO 10046:1996 | Aircraft — Methodology of calculating cargo compartment volumes |
ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
ISO 10254:1995 | Air cargo and ground equipment Vocabulary |
SAE ARP 5486 : 2013 | AIR CARGO PALLETS - UTILIZATION GUIDELINES |
ISO 3676:2012 | Packaging — Complete, filled transport packages and unit loads — Unit load dimensions |
SAE AS 1988B : 2016 | AIR CARGO PALLET EXTENSIONS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.