Skip to content
Please enter a keyword to search

  • BS ISO 2230:2002

    Current The latest, up-to-date edition.

    Rubber products. Guidelines for storage

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  20-05-2002

    Publisher:  British Standards Institution

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Classification of rubber types according to their
      relative susceptibility to deterioration
    5 Packaging
    6 Storage
    7 Inspection, testing and recording of data during storage
    Annex
    A Recommendations for inspection and testing of specific
      products
    Bibliography

    Abstract - (Show below) - (Hide below)

    Gives guidelines for the inspection, recording procedures, packaging and storage of products, assemblies and components made from vulcanized or thermoplastic rubber prior to being put into circulation. Applies to both solid and cellular rubber products prepared from dry raw rubber, latex or other sources.

    Scope - (Show below) - (Hide below)

    This part of ISO 12757 establishes minimum quality requirements for ball point pens (refillable or non-refillable) and refills for general use.

    Additional requirements for ball point pens for documentary use are given in ISO 12757-2.

    General Product Information - (Show below) - (Hide below)

    Committee PRI/73
    Development Note Supersedes BS 3574(1989), 96/122187 DC and 98/126149 DC (06/2002) Reviewed and confirmed by BSI, April 2018. (04/2018)
    Document Type Standard
    Publisher British Standards Institution
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    DEFSTAN 81-55/5(2009) : 2009 PACKAGING OF MECHANICAL COMPONENTS
    DEFSTAN 93-57/2(2004) : 2004 RUBBER SHEET, CELLULAR (CLOSED CELL, NON-OIL RESISTANT)
    DEFSTAN 81-055/8(2021):2021 Packaging of Mechanical Components & Items
    04/103063 DC : DRAFT JAN 2004 BS 7714 - GUIDE FOR CARE AND HANDLING OF SEALS FOR FLUID POWER APPLICATIONS
    02/123418 DC : DRAFT AUG 2002 BS 903-3 - PHYSICAL TESTING OF RUBBER - PART 3: ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA
    DEFSTAN 93-41/3(2004) : 2004 RUBBER SHEET, CELLULAR, OPEN CELL, MINIMUM TARNISHING
    DEFSTAN 07-283/2(2017) : 2017 SPECIFICATION FOR THE TYPE P RESILIENT MOUNT
    DEFSTAN 07-288/2(2017) : 2017 SPECIFICATION FOR THE TYPE 'PD' AND SUPER 'D' MOUNTS
    BS 6920-2.1:2014 Suitability of non-metallic materials and products for use in contact with water intended for human consumption with regard to their effect on the quality of the water Methods of test - Samples for testing
    BS 3227:2003 Butyl rubber compounds (including halobutyl compounds). Specification
    BS 2752:2003 Chloroprene rubber compounds. Specification
    BS 6014:2003 Ethylene propylene rubber compounds. Specification
    BS 1155:2003 Natural rubber compounds for extrusion. Specification
    BS 6996:2003 Mineral oil resistant acrylonitrile-butadiene rubber compounds. Specification
    BS 4F 68:2002 Controlled storage of vulcanized rubbers for use in aerospace applications
    DEFSTAN 47-32/2(2011) : 2011 RUBBER HOSE AND HOSE ASSEMBLIES FOR FLUID POWER SYSTEMS
    DEFSTAN 81-41(PT6)/9(2015) : 2015 PACKAGING OF DEFENCE MATERIEL - PART 6: PACKAGE MARKING
    DEFSTAN 81-41(PT1)/7(2013) : 2013 PACKAGING OF DEFENCE MATERIEL - PART 1: INTRODUCTION TO DEFENCE PACKAGING REQUIREMENTS
    DEFSTAN 81-60/3(2009) : 2009 PACKAGING OF GASKETS, SEALS, 'O' RINGS, GROMMETS AND SIMILAR MATERIEL
    BS 1154:2003 Natural rubber compounds. Specification
    BS 7714:2005 Care and handling of seals for fluid power applications. Guide
    BS 903-3:2003 Physical testing of rubber Acquisition and presentation of comparable single-point data
    13/30287567 DC : 0 BS 6920-2.1 - SUITABILITY OF NON-METALLIC PRODUCTS FOR USE IN CONTACT WITH WATER INTENDED FOR HUMAN CONSUMPTION WITH REGARD TO THEIR EFFECT ON THE QUALITY OF THE WATER - PART 2: METHODS OF TEST - SECTION 2.1: SAMPLES FOR TESTING
    DEFSTAN 07-286/2(2017) : 2017 SPECIFICATION FOR THE TYPE 'K' RESILIENT MOUNT
    DEFSTAN 81-41(PT1)/6(2006) : 2006 PACKAGING OF DEFENCE MATERIEL - PART 1: INTRODUCTION TO DEFENCE PACKAGING REQUIREMENTS
    DEFSTAN 81-41(PT1)/8(2014) : 2014 PACKAGING OF DEFENCE MATERIAL - PART 1: INTRODUCTION TO DEFENCE PACKAGING REQUIREMENTS
    DEFSTAN 07-287/2(2017) : 2017 SPECIFICATION FOR THE TYPE 'U' MOUNTS
    DEFSTAN 81-39/5(2012) : 2012 PACKAGING OF RUBBER HOSES, PLASTICS HOSES, AND HOSE ASSEMBLIES
    DEFSTAN 81-94/5(2014) : 2014 PACKAGING OF CONSUMABLE STORES WHEN A MILITARY LEVEL OR CODE IS NOT STIPULATED
    DEFSTAN 81-41(PT6)/8(2013) : 2013 PACKAGING OF DEFENCE MATERIEL - PART 6: PACKAGE MARKING
    DEFSTAN 81-55/6(2013) : 2013 PACKAGING OF MECHANICAL COMPONENTS
    DEFSTAN 81-055/7(2017) : 2017 PACKAGING OF MECHANICAL COMPONENTS & ITEMS
    DEFSTAN 47-032/3(2017) : 2017 RUBBER HOSE AND HOSE ASSEMBLIES FOR FLUID POWER SYSTEMS
    BS 903-4:2003 Physical testing of rubber Acquisition and presentation of comparable multi-point data
    DEFSTAN 81-60/4(2014) : 2014 PACKAGING OF GASKETS, SEALS, 'O' RINGS, GROMMETS AND SIMILAR MATERIEL
    DEFSTAN 81-94/4(2009) : 2009 PACKAGING OF CONSUMABLE STORES WHEN A MILITARY LEVEL OR CODE IS NOT STIPULATED
    DEFSTAN 81-41(PT6)/7(2010) : 2010 PACKAGING OF DEFENCE MATERIEL - PART 6: PACKAGE MARKING
    DEFSTAN 81-041(PT1)/9(2016) : 2016 PACKAGING OF DEFENCE MATERIEL - PART 1: INTRODUCTION TO DEFENCE PACKAGING REQUIREMENTS
    DEFSTAN 81-39/4(2005) : 2005 PACKAGING OF RUBBER HOSES, PLASTICS HOSES, AND HOSE ASSEMBLIES
    DEFSTAN 93-21/4(2004) : 2004 CHLOROPRENE RUBBER, CELLULAR, CLOSED CELL, MINIMUM TARNISHING
    DEFSTAN 93-57/3(2009) : 2009 RUBBER SHEET, CELLULAR (CLOSED CELL, NON-OIL RESISTANT)
    DEFSTAN 07-285/2(2017) : 2017 SPECIFICATION FOR THE TYPE 'L' AND TYPE 'M' RESILIENT MOUNTS
    DEFSTAN 81-39/6(2015) : 2015 PACKAGING OF RUBBER HOSES, PLASTICS HOSES; AND HOSE ASSEMBLIES

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 7664:2000 Rubber, raw natural and raw synthetic General guidance on storage
    ISO 1825:2010 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling Specification
    ISO 8331:2016 Rubber and plastics hoses and hose assemblies Guidelines for selection, storage, use and maintenance
    ISO 4591:1992 Plastics — Film and sheeting — Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
    ISO 2602:1980 Statistical interpretation of test results Estimation of the mean Confidence interval
    ISO 5285:2012 Conveyor belts — Guidelines for storage and handling
    ISO 9004:2009 Managing for the sustained success of an organization A quality management approach
    ISO 9001:2015 Quality management systems — Requirements
    ISO 5978:1990 Rubber- or plastics-coated fabrics — Determination of blocking resistance
    ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
    ISO 4223-2:1991 Definitions of some terms used in the tyre industry — Part 2: Solid tyres
    ISO 1629:2013 Rubber and latices — Nomenclature
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective