BS ISO/IEC 15457-1:2001
Current
The latest, up-to-date edition.
Identification cards. Thin flexible cards Physical characteristics
Hardcopy , PDF
English
02-11-2001
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 General characteristics
4.1 Introduction
4.2 Materials
4.3 Finishing
4.4 Quality of TFC products
4.5 Reference edges
4.6 Card life
4.7 Environmental conditions
5 Outline geometry
5.1 Dimensions
5.2 Corners
5.3 Edges
6 Presentation
6.1 Single card
6.2 Fan-fold pack
6.3 Reel
7 Positioning features
7.1 Punched positioning hole
7.2 Printed positioning mark
8 Characteristics specific to contactless TFCs
8.1 Local overthickness due to the presence of
the chip
8.2 Antenna location in Special TFC.1 cards
8.3 Location of chip and forbidden area for thermal
printing
8.4 Joins and splices
8.5 Ultra-violet light
8.6 X-rays
8.7 Dynamic bending stress
8.8 Dynamic torsional stress
8.9 Static electricity
8.10 Operating temperature
Annex A (normative) - Paper TFC material characteristics
Annex B (normative) - Composite TFC material characteristics
Annex C (normative) - Plastic TFC material characteristics
Annex D (informative) - Recommended location of TFC.1
tactile identifiers
Bibliography
Describes the physical characteristics of thin flexible cards at two points in the card life cycle: - at the point of loading into the card issuing equipment; - at the point of issue to the public.
| Committee |
IST/17
|
| DevelopmentNote |
Supersedes 00/648564 DC (11/2001) Supersedes 06/30154066 DC. (04/2008)
|
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO/IEC 15457-1:2008 | Identical |
| ISO/IEC 10373-1:2006 | Identification cards Test methods Part 1: General characteristics |
| ISO 5636-3:2013 | Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method |
| ISO 5629:1983 | Paper and board Determination of bending stiffness Resonance method |
| ISO/IEC 15693-2:2006 | Identification cards Contactless integrated circuit cards Vicinity cards Part 2: Air interface and initialization |
| ISO 5626:1993 | Paper Determination of folding endurance |
| ISO 2471:2008 | Paper and board — Determination of opacity (paper backing) — Diffuse reflectance method |
| ISO/IEC 10373-6:2016 | Identification cards Test methods Part 6: Proximity cards |
| ISO/IEC 15693-3:2009 | Identification cards Contactless integrated circuit cards Vicinity cards Part 3: Anticollision and transmission protocol |
| ISO 2758:2014 | Paper Determination of bursting strength |
| ISO 8570:1991 | Plastics Film and sheeting - Determination of cold-crack temperature |
| ISO 5627:1995 | Paper and board — Determination of smoothness (Bekk method) |
| ISO 2144:2015 | Paper, board and pulps Determination of residue (ash) on ignition at 900 degrees C |
| ISO/IEC 10373-7:2008 | Identification cards Test methods Part 7: Vicinity cards |
| ISO 8226-2:1990 | Paper and board — Measurement of hygroexpansivity — Part 2: Hygroexpansivity up to a maximum relative humidity of 86 % |
| ISO 1924-2:2008 | Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method (20 mm/min) |
| ISO 1831:1980 | Printing specifications for optical character recognition |
| ISO 1184:1983 | Plastics Determination of tensile properties of films |
| ISO/IEC 10536-1:2000 | Identification cards Contactless integrated circuit(s) cards Close-coupled cards Part 1: Physical characteristics |
| ISO 534:2011 | Paper and board — Determination of thickness, density and specific volume |
| ISO/IEC 7810:2003 | Identification cards Physical characteristics |
| ISO/IEC 15457-2:2007 | Identification cards — Thin flexible cards — Part 2: Magnetic recording technique |
| ISO/IEC 10536-3:1996 | Identification cards Contactless integrated circuit(s) cards Part 3: Electronic signals and reset procedures |
| ISO 8295:1995 | Plastics Film and sheeting Determination of the coefficients of friction |
| ISO/IEC 15457-3:2008 | Identification cards — Thin flexible cards — Part 3: Test methods |
| ISO 6383-2:1983 | Plastics Film and sheeting Determination of tear resistance Part 2: Elmendorf method |
| ISO/IEC 10536-2:1995 | Identification cards Contactless integrated circuit(s) cards Part 2: Dimensions and location of coupling areas |
| ISO/IEC 15693-1:2010 | Identification cards Contactless integrated circuit cards Vicinity cards Part 1: Physical characteristics |
| ISO 4593:1993 | Plastics Film and sheeting Determination of thickness by mechanical scanning |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.