BS M 39:1972
Current
The latest, up-to-date edition.
Method for penetrant inspection of aerospace materials and components
Hardcopy , PDF
English
14-02-1972
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
METHOD
1 SCOPE
2 TERMS AND DEFINITIONS
3 INTRODUCTION
4 COMPATIBILITY OF MATERIALS
5 CLASSIFICATION AND GROUPING
6 SAFETY PRECAUTIONS
7 SELECTION OF PROCESS
8 EQUIPMENT
9 APPROVALS
10 PREPARATION OF PARTS
11 PROCEDURE FOR PENETRANT INSPECTION
12 VIEWING CONDITIONS
13 INSPECTION AND INTERPRETATION
14 RETESTING
15 TECHNIQUE SHEETS AND PRESENTATION OF DATA
16 CLEANING AFTER TESTING
17 CONTROL TESTS
APPENDICES A - SEQUENCE OF OPERATIONS
APPENDICES B - INSPECTION PERSONNEL
APPENDICES C - PENETRANT INSPECTION TECHNIQUE SHEET
Provides procedures for detecting surface flaws in aerospace materials and components, during the manufacturing stage and in service, by penetrant inspection techniques.
| Committee |
ACE/61/-/5
|
| DevelopmentNote |
Supersedes 70/26724 DC (08/2005) Reviewed and confirmed by BSI, December 2009. (11/2009)
|
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This British Standard gives requirements and procedures for de tee ting surface flaws in aerospace materials and components, during both the manufacturing stage and in service, by penetrant inspection techniques.
| BS M 42:1972 | Methods for non-destructive testing of fusion and resistance welds in thin gauge materials |
| BS 4L 101:1990 | Procedure for inspection, testing and acceptance of aluminium-base and magnesium-base ingots and castings |
| SBAC TS 21 : 2011 | MANUFACTURING SPECIFICATION FOR BOLTS, 900 MPA (130,000 LBF/IN[2]) - TENSILE AT ROOM TEMPERATURE |
| DEFSTAN 47-22/1(1979) : 1979 | END FITTINGS FOR FLEXIBLE HOSE ASSEMBLIES FOR AIRCRAFT - METRIC |
| DEFSTAN 07-85(PT1)/3(2006) : 2006 | DESIGN REQUIREMENTS FOR WEAPONS AND ASSOCIATED SYSTEMS - PART 1: MANDATORY DESIGN REQUIREMENTS |
| BS 7029-2:1993 | Method of specifying thermoplastics injection mouldings Additional requirements for polycarbonate, polyamide and polyethylene mouldings |
| SAEITC TS121-4 | TS121 Manufacturing Specification for Studs, Bolts and Screws in DTD5639, EN2959 and EN3220 Material 1210 MPa (175,000 lbf/in²) Tensile at Room Temperature (for which Forging is Optional and Qualification is not a Requirement |
| SAEITC TS109-5 | TS109 Manufacturing Specification for Studs, Bolts and Screws in BS HR650, EN2398, EN2399 and EN3639 Material 900 MPa (130,000 lbf/in² ) Tensile at Room Temperature (for which Forging is Optional and Qualification not a Requirement) |
| SAEITC TS137-4 | TS137 Technical Specification for Self Retaining \"Impedance Type\" Bolt - Imperial Tensile Strength 1275 MPa (185,000 lbf/in²) at Ambient Temperature 1065 MPa (154,000 lbf/in² at 425°C |
| SAEITC TS27-4 | TS27 Manufacturing Specification for Studs, Bolts and Screws in BS HR601 Material 1000 MPa (145,000 lbf/in²) Tensile at Room Temperature (for which Forging is optional and Qualification not a requirement) |
| SBAC TS 26 : 4 | TECHNICAL SPECIFICATION FOR ALL METAL SELF-LOCKING NUTS (UNJ THREADS) 1210 MPA (175,000 LBF/IN[2]) MINIMUM TENSILE STRENGTH AT AMBIENT TEMPERATURE |
| SAEITC TS102-2 | TS102 Procurement Document - Shackles, Wire Rope ISO Diameters |
| SBAC TS 108 : 5 | MANUFACTURING SPECIFICATION FOR STUDS, BOLTS AND SCREWS IN BS S159 MATERIAL 1100 MPA (159,000 LBF/IN[2]) TENSILE AT ROOM TEMPERATURE (FOR WHICH FORGING IS OPTIONAL AND QUALIFICATION NOT A REQUIREMENT) |
| SBAC TS 24 : 6 | MANUFACTURING SPECIFICATION FOR BOLTS, 1275 MPA (185,000 LBF/IN[2]) - TENSILE AT ROOM TEMPERATURE, 1000 MPA (145,000 LBF/IN[2]) TENSILE AT 650 DEGREE C |
| SAEITC TS148-4 | TS148 Manufacturing Specification for Studs, Bolts and Screws in DTD5638, EN2952, EN2961 and EN3219 Material, 1275 MPa (185,000 lbf/in²) Tensile at Room Temperature (for which Forging is Optional and Qualification not a Requirement) |
| SAEITC TS149-2 | TS149 Technical Specification for All Metal Self-Locking Nuts (UNJ Threads) 1550 MPa (225,000 lbf/in²) Minimum Tensile Strength at Ambient Temperature |
| SAEITC TS135-2 | TS135 Technical Specification for All Metal Self-Locking Nuts (MJ Threads Reduced Hexagon - Deep Counterbored Tensile Strength:- 1100 MPa at Ambient Temperature |
| SAEITC TS 22 ISSUE 10 : 2008 | MANUFACTURING SPECIFICATION FOR BOLTS, 1100 MPA (159,000 LBF/IN[2]) - ULTIMATE TENSILE STRENGTH - MINIMUM AT ROOM TEMPERATURE |
| SAEITC TS175-2 | TS175 Specification for Manufacture, Performance and Testing of Quick Release Pins (Ball Type) Metric |
| SAEITC TSC47-022_01 | END FITTINGS FOR HOSE ASSEMBLIES METRIC |
| SAEITC TS134-4 | TS134 Technical Specification for Self-Retaining \"Impedance Type\" Bolts - Metric Tensile Strength: 1275 MPa at Ambient Temperature 1065 MPa at 425°c |
| SBAC TS 145 : 4 | TECHNICAL SPECIFICATION NO. TS145 - MANUFACTURING SPECIFICATION FOR BOLTS (UNIFIED THREADS) HEAT RESISTING ALLOY STEEL FV535, CLASSIFICATION RM >= 1000 MPA (145,000 LBF/IN[2]) @ TA/+550 DEGREES C |
| BS 4A 100:2003 | Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa |
| BS 3A 100:1991 | Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa |
| BS 4000:1968 | Sizes of paper and board |
| DEF 2331 : A AMD 3 | PROTECTIVE PX 1 DYED AND UNDYED |
| DTD 929 : DEC 65 | PENETRANT METHODS OF FLAW DETECTION |
| BS 580:1963 | Specification for trichloroethylene |
| BS 4489(1969) : LATEST | |
| BS M 37:1970 | Method for the etch inspection of metallic materials and components |
| DEFSTAN 03-2/1(1970) : 1970 | CLEANING AND PREPARATION OF METAL SURFACES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.