Skip to content
Please enter a keyword to search

  • BS PD8010-1(2015) : 2015

    Current The latest, up-to-date edition.

    PIPELINE SYSTEMS - PART 1: STEEL PIPELINES ON LAND - CODE OF PRACTICE

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-01-2015

    Publisher:  British Standards Institution

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 Scope
    2 Normative references
    3 Terms, definitions, symbols and abbreviations
    4 Health, safety and assurance
    5 Design - System and safety
    6 Design - Mechanical integrity
    7 Design - Stations and terminals
    8 Design - Materials and coatings
    9 Design - Corrosion management
    10 Construction - Fabrication and installation
    11 Construction - Testing
    12 Pre-commissioning and commissioning
    13 Operation, maintenance and integrity assurance
       management
    14 Abandonment
    Annexes
    Annex A (informative) - Extent of pipeline systems for
            conveying oil and gas that are covered by this part
            of PD 8010
    Annex B (normative) - Quality assurance
    Annex C (normative) - Records and document control
    Annex D (informative) - Hazards in pipeline design
    Annex E (normative) - Safety evaluation of pipelines
    Annex F (normative) - Pipeline route selection
    Annex G (normative) - Loads
    Annex H (informative) - Buckling
    Annex I (informative) - Planning and legal
    Bibliography

    Abstract - (Show below) - (Hide below)

    Defines recommendations for and guidance on the design, selection, specification and use of materials, routeing, land acquisition, construction, installation, testing, operation, maintenance and abandonment of land pipeline systems constructed from steel.

    General Product Information - (Show below) - (Hide below)

    Committee PSE/17/2
    Development Note Supersedes BS PD8010-1(2004) & 14/30286897 DC. (03/2015) Supersedes 16/30344659 DC. 2015 Edition Re-Issued in November 2016 & incorporates AMD 1 2016. (11/2016)
    Document Type Standard
    Publisher British Standards Institution
    Status Current

    Standards Referencing This Book - (Show below) - (Hide below)

    BS EN 437 : 2003 TEST GASES - TEST PRESSURES - APPLIANCE CATEGORIES
    BS ISO 7005-1:2011 Pipe flanges Steel flanges for industrial and general service piping systems
    BS EN ISO 148-1:2016 Metallic materials. Charpy pendulum impact test Test method
    BS EN ISO 9004:2009 Managing for the sustained success of an organization. A quality management approach
    BS 5607:1998 Code of practice for the safe use of explosives in the construction industry
    DIN 30670:2012-04 Polyethylene coatings on steel pipes and fittings - Requirements and testing
    BS EN ISO 9001:2015 Quality management systems. Requirements
    ISO 15590-1:2009 Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 1: Induction bends
    PD 8010-5:2013 Pipeline systems Subsea pipelines. Guide to operational practice
    NACE TM 02 84 : 2016 EVALUATION OF PIPELINE AND PRESSURE VESSEL STEELS FOR RESISTANCE TO HYDROGEN-INDUCED CRACKING
    API 5LC : 2015 CRA LINE PIPE
    ASME PV CODE 8 DIV 1 : 2017 BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1
    ISO 21467:2004 Earth-moving machinery — Horizontal directional drills — Terminology and specifications
    API 6A : 2010 SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT
    ISO 14313:2007 Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves
    ASME B31.8 : 2016 Gas Transmission and Distribution Piping Systems
    ASME B16.11 : 2016 FORGED FITTINGS, SOCKET-WELDING AND THREADED
    BS EN 815 : 1997 SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS
    BS EN 10217-2 : 2002 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
    BS EN ISO 15610:2003 Specification and qualification of welding procedures for metallic materials. Qualification based on tested welding consumables
    ASME B31.3:2016 PROCESS PIPING
    BS 3618-3:1971 Glossary of mining terms Boring and exploration
    BS ISO 10474:2013 Steel and steel products. Inspection documents
    BS 5949:1980 Specification for asbestos-cement pipes and joints for thrust-boring and pipe jacking
    BS EN 1992-1-1 : 2004 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
    BS EN ISO 15607:2003 Specification and qualification of welding procedures for metallic materials. General rules
    BS EN ISO 15653:2010 Metallic materials. Method of test for the determination of quasistatic fracture toughness of welds
    BS EN 60079-10-1:2015 Explosive atmospheres Classification of areas. Explosive gas atmospheres
    BS EN ISO 9606-1:2017 Qualification testing of welders. Fusion welding Steels
    BS EN 10224:2002 Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids. Technical delivery conditions
    ASME B16.20 : 2012 METALLIC GASKETS FOR PIPE FLANGES
    BS EN ISO 3183 : 2012 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS
    API 5L : 2012 LINE PIPE
    BS EN ISO 14001:2015 Environmental management systems. Requirements with guidance for use
    ISO 15590-3:2004 Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 3: Flanges
    PD 8010-4:2012 Pipeline systems Steel pipelines on land and subsea pipelines. Code of practice for integrity management
    BS EN 13480-3:2017 Metallic industrial piping Design and calculation
    BS EN 60079-14:2014 Explosive atmospheres Electrical installations design, selection and erection
    NACE MR 01 75 : 2003 METALS FOR SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING RESISTANCE IN SOUR OILFIELD ENVIRONMENTS
    BS 6100-3:2007 Building and civil engineering. Vocabulary Civil engineering. General
    BS EN 1594:2013 Gas infrastructure. Pipelines for maximum operating pressure over 16 bar. Functional requirements
    ISO 15589-1:2015 Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline systems — Part 1: On-land pipelines
    BS EN 12336 : 2005 TUNNELLING MACHINES - SHIELD MACHINES, THRUST BORING MACHINES, AUGER BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS
    BS EN 12110:2014 Tunnelling machines. Air locks. Safety requirements
    BS ISO 1143:2010 Metallic materials. Rotating bar bending fatigue testing
    BS EN 12111:2014 Tunnelling machines. Road headers and continuous miners. Safety requirements
    ISO 15590-2:2003 Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 2: Fittings
    BS ISO 15649:2001 Petroleum and natural gas industries. Piping
    BS EN 10217-5:2002 Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
    BS EN 295-7:2013 Vitrified clay pipe systems for drains and sewers Requirements for pipes and joints for pipe jacking
    BS EN ISO 21809-1:2011 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Polyolefin coatings (3-layer PE and 3-layer PP)
    ISO 21809-3:2016 Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings
    BS EN ISO 16708:2006 Petroleum and natural gas industries. Pipeline transportation systems. Reliability-based limit state methods
    MSS SP 44 : 2016 STEEL PIPELINE FLANGES
    BS 3518-3:1963 Methods of fatigue testing Direct stress fatigue tests
    BS 6349-1-4:2013 Maritime works General. Code of practice for materials
    ASME B16.5 : 2017 PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD
    ASME B16.21 : 2016 NONMETALLIC FLAT GASKETS FOR PIPE FLANGES
    BS EN 10216-1:2013 Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties
    NFPA 30 : 2018 FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE
    BS EN ISO 80000-1:2013 Quantities and units General
    BS 3618-8:1974 Glossary of mining terms Winning and working
    ASME B16.9 : 2012 FACTORY-MADE WROUGHT BUTTWELDING FITTINGS
    BS EN 14161 : 2011 PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS (ISO 13623:2009 MODIFIED)
    BS EN 10217-1:2002 Welded steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties
    BS 6164:2011 Code of practice for health and safety in tunnelling in the construction industry
    BS PD8010-3(2009) : 2009 PIPELINE SYSTEMS - PART 3: STEEL PIPELINES ON LAND - GUIDE TO THE APPLICATION OF PIPELINE RISK ASSESSMENT TO PROPOSED DEVELOPMENTS IN THE VICINITY OF MAJOR ACCIDENT HAZARD PIPELINES CONTAINING FLAMMABLES - SUPPLEMENT TO PD 8010-1:2004
    BS 3293:1960 Specification for carbon steel pipe flanges (over 24 inches nominal size) for the petroleum industry
    BS 4515-2:1999 Specification for welding of steel pipelines on land and offshore Duplex stainless steel pipelines
    BS ISO 12107:2003 Metallic materials. Fatigue testing. Statistical planning and analysis of data
    BS 5911-120:1989 Precast concrete pipes, fittings and ancillary products Specification for reinforced jacking pipes with flexible joints
    ASME B16.47 : 2017 LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD
    BS EN 10216-2:2013 Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified elevated temperature properties
    BS EN ISO 9000:2015 Quality management systems. Fundamentals and vocabulary
    BS ISO 21809-4:2009 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Polyethylene coatings (2-layer PE)
    BS EN ISO 21809-2:2014 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Single layer fusion-bonded epoxy coatings
    ISO 13623:2017 Petroleum and natural gas industries — Pipeline transportation systems
    BS EN 10204:2004 Metallic products. Types of inspection documents
    API 5LD : 2017 CRA CLAD OR LINED STEEL PIPE
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective