CAN/CSA-B182.14-12/B182.15-12
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Profile steel reinforced polyethylene (SRPE) storm sewer pipe and fittings/Profile steel reinforced polyethylene (SRPE) sewer pipe and fittings
Hardcopy , PDF
18-08-2023
French, English
01-01-2012
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Preface
B182.14-12, Profile steel reinforced polyethylene (SRPE)
storm sewer pipe and fittings
1 Scope
2 Reference publications
3 Definitions and abbreviations
4 General requirements
5 Manufactured pipe and fittings
6 Jointing systems
7 Quality control
8 Test methods
9 Markings
Annexes
A (informative) - Recommended quality control test frequencies
B (informative) - Base inside diameters
C (informative) - Fitting patterns
D (informative) - Type 3 non-gasketed coupling joints
E (informative) - Recommendations for purchase ordering
B182.15-12, Profile steel reinforced polyethylene (SRPE)
sewer pipe and fittings
1 Scope
2 Reference publications
3 Definitions and abbreviations
4 General requirements
5 Manufactured pipe and fittings
6 Jointing systems
7 Quality control
8 Test methods
9 Markings
Annexes
A (informative) - Recommended quality control test frequencies
B (informative) - Base inside diameter
C (informative) - Fitting patterns
D (informative) - Recommendations for purchase ordering
Preface This is the first edition of CSA B182.14, Profile steel reinforced polyethylene (SRPE) storm sewer pipe and fittings, and the CSA B182.15, Profile steel reinforced polyethylene (SRPE) sewer pipe and fittings, which will form part of the B1800 series of Standards. These Standards are considered suitable for use for conformity assessment within the stated scopes of the Standards. B182.14-12 - Profile steel reinforced polyethylene (SRPE) storm sewer pipe and fittings Scope This Standard specifies requirements for profile steel reinforced polyethylene (SRPE) sewer pipe and fittings for storm sewer, and other gravity-flow applications. Profile wall pipe in this Standard includes open profile pipe of helical construction, with a smooth interior and sizes based on controlled inside diameter. The pipe can be perforated, for specific applications, as required. Notes : (1) Pipe and fittings manufactured in accordance with this Standard should be installed in accordance with CSA B182.11. (2) The structural design of this product should be in accordance with the manufacturer\'s recommendations. (3) Refer to Annex A for recommended quality control test frequencies. (4) Refer to Annex B for base inside diameters used to determine installation deflection limits. (5) Refer to Annex C for fitting patterns covered by this Standard. (6) Refer to Annex D for examples of Type 3 non-gasketed coupling joints. (7) The ordering recommendations in Annex E should be followed to ensure that the requested products are described adequately. ------------------------------------------------------------------------------- B182.15-12 - Profile steel reinforced polyethylene (SRPE) sewer pipe and fittings Scope This Standard specifies requirements for profile steel reinforced polyethylene (SRPE) sewer pipe and fittings for sanitary sewer and other gravity-flow applications. Profile wall pipe in this standard includes open profile pipe of helical construction, with a smooth interior and sizes based on controlled inside diameter. The pipe can be perforated, for specific applications, as required. Notes : (1) Pipe and fittings manufactured in accordance with this Standard should be installed in accordance with CSA B182.11. (2) The structural design of this product should be in accordance with the manufacturer\'s recommendations. (3) Refer to Annex A for recommended quality control test frequencies. (4) Refer to Annex B for base inside diameters used to determine installation deflection limits. (5) Refer to Annex C for fitting patterns covered by this Standard. (6) The ordering recommendations in Annex D should be followed to ensure that the requested products are described adequately.
| DevelopmentNote |
French Edition issued on 01-07-2012. (08/2012)
|
| DocumentType |
Standard
|
| ISBN |
978-1-55491-852-2
|
| Pages |
76
|
| PublisherName |
Canadian Standards Association
|
| Status |
Withdrawn
|
Preface This is the first edition of CSA B182.14, Profile steel reinforced polyethylene (SRPE) storm sewer pipe and fittings, and the CSA B182.15, Profile steel reinforced polyethylene (SRPE) sewer pipe and fittings, which will form part of the B1800 series of Standards. These Standards are considered suitable for use for conformity assessment within the stated scopes of the Standards. B182.14-12 - Profile steel reinforced polyethylene (SRPE) storm sewer pipe and fittings Scope This Standard specifies requirements for profile steel reinforced polyethylene (SRPE) sewer pipe and fittings for storm sewer, and other gravity-flow applications. Profile wall pipe in this Standard includes open profile pipe of helical construction, with a smooth interior and sizes based on controlled inside diameter. The pipe can be perforated, for specific applications, as required. Notes : (1) Pipe and fittings manufactured in accordance with this Standard should be installed in accordance with CSA B182.11. (2) The structural design of this product should be in accordance with the manufacturer\'s recommendations. (3) Refer to Annex A for recommended quality control test frequencies. (4) Refer to Annex B for base inside diameters used to determine installation deflection limits. (5) Refer to Annex C for fitting patterns covered by this Standard. (6) Refer to Annex D for examples of Type 3 non-gasketed coupling joints. (7) The ordering recommendations in Annex E should be followed to ensure that the requested products are described adequately. ------------------------------------------------------------------------------- B182.15-12 - Profile steel reinforced polyethylene (SRPE) sewer pipe and fittings Scope This Standard specifies requirements for profile steel reinforced polyethylene (SRPE) sewer pipe and fittings for sanitary sewer and other gravity-flow applications. Profile wall pipe in this standard includes open profile pipe of helical construction, with a smooth interior and sizes based on controlled inside diameter. The pipe can be perforated, for specific applications, as required. Notes : (1) Pipe and fittings manufactured in accordance with this Standard should be installed in accordance with CSA B182.11. (2) The structural design of this product should be in accordance with the manufacturer\'s recommendations. (3) Refer to Annex A for recommended quality control test frequencies. (4) Refer to Annex B for base inside diameters used to determine installation deflection limits. (5) Refer to Annex C for fitting patterns covered by this Standard. (6) The ordering recommendations in Annex D should be followed to ensure that the requested products are described adequately.
| NSF 14 : 2016 | PLASTICS PIPING SYSTEM COMPONENTS AND RELATED MATERIALS |
| ASTM A 1008/A1008M : 2016-09 | SPECIFICATION FOR STEEL, SHEET, COLD-ROLLED, CARBON, STRUCTURAL, HIGH-STRENGTH LOW-ALLOY, HIGH-STRENGTH LOW-ALLOY WITH IMPROVED FORMABILITY, SOLUTION HARDENED, AND BAKE HARDENABLE |
| CSA B181.0 : 2011 GEN INS 1 11 | DEFINITIONS, GENERAL REQUIREMENTS, AND METHODS OF TESTING FOR THERMOPLASTIC NONPRESSURE PIPING |
| CSA B1800 SERIES : 2015 | THERMOPLASTIC NON-PRESSURE PIPING COMPENDIUM |
| ASTM D 2122 : 2016 : REDLINE | Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings |
| ASTM D 3350 : 2014 : REDLINE | Standard Specification for Polyethylene Plastics Pipe and Fittings Materials |
| CSA B182.4 : 2011 GEN INS 1 11 | PROFILE POLYVINYLCHLORIDE (PVC) SEWER PIPE AND FITTINGS |
| ASTM D 4703 : 2016 : REDLINE | Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets |
| CSA B182.6 : 2011 GEN INS 1 11 | PROFILE POLYETHYLENE (PE) SEWER PIPE AND FITTINGS FOR LEAK-PROOF SEWER APPLICATIONS |
| ASTM D 638 : 2014 : REDLINE | Standard Test Method for Tensile Properties of Plastics |
| CSA B182.11 : 2011 GEN INS 1 11 | STANDARD PRACTICE FOR THE INSTALLATION OF THERMOPLASTIC DRAIN, STORM, AND SEWER PIPE AND FITTINGS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.