• CAN/CSA-C22.2 NO. 60896-22:17

    Current The latest, up-to-date edition.

    Stationary lead-acid batteries — Part 22: Valve regulated types - Requirements (Adopted IEC 60896-22:2004, first edition, 2004-02, with Canadian deviations) | Batteries stationnaires au plomb - Partie 22 : Types étanches à soupapes - Exigences (norme IEC 60896-22:2004 adoptée, première édition, 2004-02, avec exigences propres au Canada)

    Available format(s):  Hardcopy, PDF

    Language(s):  English - French

    Published date:  01-01-2017

    Publisher:  Canadian Standards Association

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Functional requirements
    5 Reporting format
    6 Requirements and characteristics
    Annex A (normative) - User statement of requirements
    Annex B (normative) - Supplier statement of product
            range test results
    Bibliography

    Abstract - (Show below) - (Hide below)

    This part of IEC 60896 applies to all stationary lead-acid cells and monobloc batteries of the valve regulated type for float charge applications, (i.e. permanently connected to a load and to a d.c. power supply), in a static location (i.e. not generally intended to be moved from place to place) and incorporated into stationary equipment or installed in battery rooms for use in telecom, uninterruptible power supply (UPS), utility switching, emergency power or similar applications.

    Scope - (Show below) - (Hide below)

    Perface This is the first edition of CAN/CSA-C22.2 No. 60896-22, Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements, which is an adoption, with Canadian deviations, of the identically titled IEC (International Electrotechnical Commission) Standard 60896-22 (first edition, 2004-02). It is one in a series of Standards issued by CSA Group under Part II of the Canadian Electrical Code. For brevity, this Standard will be referred to as \"CAN/CSA-C22.2 No. 60896-22\" throughout. This Standard is intended to be used in conjunction with CAN/CSA-C22.2 No. 60896-21:17, Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test (adopted IEC 60896-21:2004, with Canadian deviations). Scope This part of IEC 60896 applies to all stationary lead-acid cells and monobloc batteries of the valve regulated type for float charge applications, (i.e. permanently connected to a load and to a d.c. power supply), in a static location (i.e. not generally intended to be moved from place to place) and incorporated into stationary equipment or installed in battery rooms for use in telecom, uninterruptible power supply (UPS), utility switching, emergency power or similar applications. The objective of this part of IEC 60896 is to assist the specifier in the understanding of the purpose of each test contained within IEC 60896-21 and provide guidance on a suitable requirement that will result in the battery meeting the needs of a particular industry application and operational condition. This Standard is used in conjunction with the common test methods described in IEC 60896-21 and is associated with all types and construction of valve regulated stationary lead-acid cells and monoblocs used in standby power applications. This part of IEC 60896 does not apply to lead-acid cells and batteries used for vehicle engine starting applications (IEC 60095 series), solar photovoltaic applications (IEC 61427), or general purpose applications (IEC 61056 series). ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Préface Ce document constitue la première édition de la CAN/CSA-C22.2 nº 60896-22, Batteries stationnaires au plomb - Partie 22 : Types étanches à soupapes - Exigences. Il s\'agit de l\'adoption, avec exigences propres au Canada, de la norme IEC (Commission Électrotechnique Internationale) 60896-22 (première édition, 2004-02) qui porte le même titre. Il fait partie d\'une série de normes publiées par le Groupe CSA qui constituent le Code canadien de l\'électricité, Deuxième partie. Par souci de brièveté, tout au long de ce document, il sera appelé «CAN/CSA-C22.2 nº 60896-22». Cette norme est conçue pour être utilisée de concert avec la CAN/CSA-C22.2 nº 60896-21:17, Batteries stationnaires au plomb - Partie 21 : Types étanches à soupapes - Méthodes d\'essai (norme IEC 60896-21:2004 adoptée, avec exigences propres au Canada). Domaine d\'application La présente partie de la CEI 60896 s\'applique à tous les éléments et batteries monoblocs stationnaires au plomb de type étanche à soupapes pour les applications en charge flottante, (c\'est-à-dire connectés en permanence à une charge et à une source d\'alimentation continue), à un emplacement fixe (c\'est-à-dire n\'étant généralement pas prévus pour être déplacés d\'un emplacement à l\'autre) et incorporés dans un matériel stationnaire ou installés dans un local batteries pour des applications telles que télécommunication, alimentation sans interruption (ASI), commutation, alimentation de secours ou applications similaires. L\'objectif de la présente partie de la CEI 60896 est de fournir une assistance au responsable de spécifications dans la compréhension de l\'objet de chaque essai inclus dans la CEI 60896-21 et de lui servir de guide dans la fixation d\'une exigence adaptée qui garantisse que la batterie répondra aux besoins d\'une application industrielle spécifique et à des conditions d\'exploitation particulières. La présente norme s\'utilise conjointement aux méthodes d\'essai communes décrites dans la CEI 60896-21 et est associée à tous les types et constructions d\'éléments et monoblocs stationnaires au plomb de type étanche à soupapes utilisés dans les applications d\'alimentation de secours. La présente partie de la CEI 60896 ne s\'applique pas aux éléments et batteries monoblocs au plomb utilisées pour les applications de démarrage des moteurs de véhicules (série CEI 60095), les applications photovoltaïques (CEI 61427) ou les applications pour usage général (série CEI 61056).

    General Product Information - (Show below) - (Hide below)

    Document Type Standard
    Publisher Canadian Standards Association
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    CAN/CSA-C22.2 NO. 60896-21:17 Stationary lead-acid batteries — Part 21: Valve regulated types — Methods of test (Adopted IEC 60896-21:2004, first edition, 2004-02, with Canadian deviations) | Batteries stationnaires au plomb — Partie 21 : Types étanches à soupapes — Méthodes d’essai (norme IEC 60896-21:2004 adoptee, première édition, 2004-02, avec exigences propres au Canada)

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV Information technology equipment - Safety - Part 1: General requirements
    CAN/CSA-C22.2 NO. 60896-21:17 Stationary lead-acid batteries — Part 21: Valve regulated types — Methods of test (Adopted IEC 60896-21:2004, first edition, 2004-02, with Canadian deviations) | Batteries stationnaires au plomb — Partie 21 : Types étanches à soupapes — Méthodes d’essai (norme IEC 60896-21:2004 adoptee, première édition, 2004-02, avec exigences propres au Canada)
    IEC 61427:2005 Secondary cells and batteries for photovoltaic energy systems (PVES) - General requirements and methods of test
    IEC 60050-151:2001 International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices
    IEC 60050-486:1991 International Electrotechnical Vocabulary (IEV) - Part 486: Secondary cells and batteries
    IEC 60707:1999 Flammability of solid non-metallic materials when exposed to flame sources - List of test methods
    IEC 60050-603:1986 International Electrotechnical Vocabulary (IEV) - Part 603: Generation, transmission and distribution of electricity - Power systems planning and management
    IEC 60695-11-10:2013 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
    ISO 9001:2015 Quality management systems - Requirements
    ISO 9000:2015 Quality management systems Fundamentals and vocabulary
    IEC 60359:2001 Electrical and electronic measurement equipment - Expression of performance
    IEC 60050-826:2004 International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations
    ISO 1043-1:2011 Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
    IEC 60050-300:2001 International Electrotechnical Vocabulary (IEV) - Part 300: Electrical and electronic measurements and measuring instruments - Part 311: General terms relating to measurements - Part 312: General terms relating to electrical measurements - Part 313: Types of electrical measuring instruments - Part 314: Specific terms according to the type of instrument
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective