• IEC 60359:2001

    Current The latest, up-to-date edition.

    Electrical and electronic measurement equipment - Expression of performance

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English - French, Spanish, Castilian

    Published date:  19-12-2001

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    INTRODUCTION
    1 Scope and object
    2 Normative references
    3 Definitions
    4 Specification of values and ranges
    5 Requirements for IEC standards related to the equipment
    6 Specification of limits of uncertainty
    7 Specification of influence quantities
    8 General rules for compliance testing
    Annex A (informative) Conceptual and terminological
            evolution from 'error' to 'uncertainty'
    Annex B (informative) Steps in the specification of
            performance
    Bibliography
    Figures

    Abstract - (Show below) - (Hide below)

    Applies to the specification of performance, with primary reference to industrial applications, of the following kinds of electrical and electronic equipment: - indicating and recording instruments which measure electrical quantities; - material measures which supply electrical quantities; - instruments which measure non-electrical quantities using electrical means, for all parts of the measuring chain which present electrical output signals. It is based on the methods expounded in GUM for expressing and evaluating the uncertainty of measurement, and refers to GUM for the statistical procedures to be used in determining the intervals assigned to represent uncertainty (including the way to account for non-negligible uncertainties in the traceability chain). The object is to provide methods for ensuring uniformity in the specification and determination of uncertainties of equipment within its scope. All other necessary requirements have been reserved for dependent IEC product standards pertaining to particular types of equipment which fall within the scope of this standard.

    General Product Information - (Show below) - (Hide below)

    Committee TC 85
    Development Note Also numbered as BS EN 60359 (05/2002) Stability Date: 2021. (09/2017)
    Document Type Standard
    Publisher International Electrotechnical Committee
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    UNE-EN 50463-4:2013 Railway applications - Energy measurement on board trains - Part 4: Communication
    12/30255394 DC : DRAFT APR 2012 BS EN 62586-1 - POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - POWER QUALITY INSTRUMENTS (PQI)
    UNE-EN 50379-3:2013 Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 3: Performance requirements for apparatus used in non-statutory servicing of gas fired heating appliances
    02/209442 DC : DRAFT AUG 2002 IEC 60896-11 ED.1 - STATIONARY LEAD-ACID BATTERIES - PART 11: VENTED TYPES - GENERAL REQUIREMENTS AND METHODS OF TESTS
    IEC 60846-1:2009 Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation - Part 1: Portable workplace and environmental meters and monitors
    IEC 60488-1:2004 Higher performance protocol for the standard digital interface for programmable instrumentation - Part 1: General
    I.S. EN 60896-21:2004 STATIONARY LEAD-ACID BATTERIES - PART 21: VALVE REGULATED TYPES - METHODS OF TEST
    NF EN 61098 : 2008 RADIATION PROTECTION INSTRUMENTATION - INSTALLED PERSONNEL SURFACE CONTAMINATION MONITORING ASSEMBLIES
    I.S. EN 61326-1:2013 ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS (IEC 61326-1:2012 (EQV))
    15/30328086 DC BS EN 61557-12. Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Part 12. Power metering and monitoring devices (PMD)
    11/30245877 DC : 0 BS EN 62387 - RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR PERSONAL AND ENVIRONMENTAL MONITORING
    13/30287730 DC : 0 BS EN 62828 ED 1.0 - REFERENCE CONDITIONS AND PROCEDURES FOR INDUSTRIAL MEASUREMENT TRANSMITTERS - PART 1: GENERAL PROCEDURES FOR ALL TYPES OF TRANSMITTERS
    BS 7400(1991) : 1991 AMD 7672 SPECIFICATION FOR ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2)
    BS EN 61069-4:2016 Industrial-process measurement, control and automation. Evaluation of system properties for the purpose of system assessment Assessment of system performance
    03/309914 DC : DRAFT JUNE 2003 IEC PAS 62129 ED.1.0 - CALIBRATION OF OPTICAL SPECTRUM ANALYZERS
    01/205932 DC : DRAFT AUG 2001 BS 8431 - CODE OF PRACTICE FOR ELECTRICAL STATIC METERING FOR SECONDARY OR SUB-METERING
    BS EN 61098 : 2007 RADIATION PROTECTION INSTRUMENTATION - INSTALLED PERSONNEL SURFACE CONTAMINATION MONITORING ASSEMBLIES
    12/30258979 DC : 0 BS ISO 10790 - MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - GUIDANCE TO THE SELECTION, INSTALLATION AND USE OF CORIOLIS METERS (MASS FLOW, DENSITY AND VOLUME FLOW MEASUREMENTS)
    BS EN 62244:2011 (published 2011-09) Radiation protection instrumentation. Installed radiation monitors for the detection of radioactive and special nuclear materials at national borders
    BS 8431(2010) : 2010 ELECTRICAL STATIC METERS FOR SECONDARY METERING AND SUB-METERING - SPECIFICATION
    BS PD IEC/PAS 62129 : 2004 CALIBRATION OF OPTICAL SPECTRUM ANALYZERS
    BS EN 61315:2006 (published 2006-03) Calibration of fibre-optic power meters
    BS EN 60896-1 : 1992 STATIONARY LEAD-ACID BATTERIES - GENERAL REQUIREMENT AND METHODS OF TEST - VENTED TYPES
    CEI EN 62244 : 2012 RADIATION PROTECTION INSTRUMENTATION - INSTALLED RADIATION MONITORS FOR THE DETECTION OF RADIOACTIVE AND SPECIAL NUCLEAR MATERIALS AT NATIONAL BORDERS
    00/244828 DC : DRAFT OCT 2000 IEC 61983 ED. 1.0 - MEASUREMENT AND EVALUATION OF HIGH FREQUENCY (9 KHZ TO 300 GHZ) ELECTROMAGNETIC FIELDS WITH REGARD TO HUMAN EXPOSURE
    DIN 43751-4:1990-06 MEASUREMENT AND CONTROL; DIGITAL MEASURING INSTRUMENTS; INSTRUMENTS FOR MEASURING TIME REFERENCE QUANTITIES; DEFINITIONS, TESTS AND DATA SHEET DETAILS
    CEI EN 60896-22 : 2005 STATIONARY LEAD-ACID BATTERIES - PART 22: VALVE REGULATED TYPES - REQUIREMENTS
    CEI EN 60896-21 : 2005 STATIONARY LEAD-ACID BATTERIES - PART 21: VALVE REGULATED TYPES - METHODS OF TEST
    PD IEC/TS 62129-3:2014 (published 2014-08) Calibration of wavelength/optical frequency measurement instruments Optical frequency meters using optical frequency combs
    BS EN 50463-4:2017 (published 2017-10) Railway applications. Energy measurement on board trains Communication
    CEI EN 61056-1 : 2014 GENERAL PURPOSE LEAD-ACID BATTERIES (VALVE-REGULATED TYPES) - PART 1: GENERAL REQUIREMENTS, FUNCTIONAL CHARACTERISTICS - METHODS OF TEST
    BS EN 50463-1:2017 (published 2017-10) Railway applications. Energy measurement on board trains General
    I.S. EN 61982:2012 SECONDARY BATTERIES (EXCEPT LITHIUM) FOR THE PROPULSION OF ELECTRIC ROAD VEHICLES - PERFORMANCE AND ENDURANCE TESTS (IEC 61982:2012 (EQV))
    BS IEC 60692:1999 Nuclear instrumentation. Density gauges utilizing ionizing radiation. Definitions and test methods
    10/30218470 DC : 0 BS EN 61056-1 ED 3 - GENERAL PURPOSE LEAD-ACID BATTERIES (VALVE-REGULATED TYPES) - PART 1: GENERAL REQUIREMENTS, FUNCTIONAL CHARACTERISTICS - METHODS OF TEST
    IEC 61344:1996 RADIATION PROTECTION INSTRUMENTATION - MONITORING EQUIPMENT - PERSONAL WARNING DEVICES FOR X AND GAMMA RADIATIONS
    BS EN 61982 : 2012 SECONDARY BATTERIES (EXCEPT LITHIUM) FOR THE PROPULSION OF ELECTRIC ROAD VEHICLES - PERFORMANCE AND ENDURANCE TESTS
    NF EN 60051-1 : 2017 DIRECT ACTING INDICATING ANALOGUE ELECTRICAL MEASURING INSTRUMENTS AND THEIR ACCESSORIES - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS COMMON TO ALL PARTS
    11/30213792 DC : 0 BS EN 50463-4 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 4: COMMUNICATION
    11/30213789 DC : 0 BS EN 50463-3 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 3: DATA HANDLING
    BS IEC 61584 : 2001 RADIATION PROTECTION INSTRUMENTATION - INSTALLED, PORTABLE OR TRANSPORTABLE ASSEMBLIES - MEASUREMENT OF AIR KERMA DIRECTION AND AIR KERMA RATE
    NF EN 60846-1 : 2015 RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION - PART 1: PORTABLE WORKPLACE AND ENVIRONMENTAL METERS AND MONITORS
    10/30173701 DC : 0 BS EN 62282-3-200 - FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS
    NF EN 62703 : 2013 EXPRESSION OF PERFORMANCE OF FLUOROMETRIC OXYGEN ANALYZERS IN LIQUID MEDIA
    14/30280137 DC : 0 BS EN 62282-3-200 ED 2.0 - FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS
    BS EN 61982-4 : 2016 SECONDARY BATTERIES (EXCEPT LITHIUM) FOR THE PROPULSION OF ELECTRIC ROAD VEHICLES - PART 4: SAFETY REQUIREMENTS OF NICKEL-METAL HYDRIDE CELLS AND MODULES
    DIN EN 61187:1995-06 ELECTRICAL AND ELECTRONIC MEASURING EQUIPMENT - DOCUMENTATION
    CEI EN 62008 : 2006 PERFORMANCE CHARACTERISTICS AND CALIBRATION METHODS FOR DIGITAL DATA ACQUISITION SYSTEMS AND RELEVANT SOFTWARE
    11/30213783 DC : 0 BS EN 50463-1 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 1: GENERAL
    BS EN 60687 : 1993 ALTERNATING CURRENT STATIC WATT HOUR METERS FOR ACTIVE ENERGY (CLASSES 0.2S AND 0.5S)
    BS EN 61557-12:2008 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures Performance measuring and monitoring devices (PMD)
    BS IEC 61501 : 1998 NUCLEAR REACTOR INSTRUMENTATION - WIDE RANGE NEUTRON FLUENCE RATE METER - MEAN SQUARE VOLTAGE METHOD
    PD CLC/TS 50591:2013 Specification and verification of energy consumption for railway rolling stock
    CEI EN 61115 : 1998 EXPRESSION OF PERFORMANCE OF SAMPLE HANDLING SYSTEMS FOR PROCESS ANALYZERS
    DIN EN ISO 18113-1:2013-01 IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS (ISO 18113-1:2009)
    UNE-EN 50463-3:2013 Railway applications - Energy measurement on board trains - Part 3: Data handling
    BS EN 61557-13 : 2011 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 13: HAND-HELD AND HAND-MANIPULATED CURRENT CLAMPS AND SENSORS FOR MEASUREMENT OF LEAKAGE CURRENTS IN ELECTRICAL DISTRIBUTION SYSTEMS
    IEC PAS 62129:2004 Calibration of optical spectrum analyzers
    BS EN 50463-5:2017 (published 2017-10) Railway applications. Energy measurement on board trains Conformity assessment
    13/30261629 DC : 0 BS EN 62792 - ELECTROSHOCK WEAPON MEASUREMENT METHOD
    IEC 61326-1 REDLINE : 2.0 ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS
    BS EN 60746-1 : 2003 EXPRESSION OF PERFORMANCE OF ELECTROCHEMICAL ANALYZERS - PART 1: GENERAL
    CEI EN 62703 : 2014 EXPRESSION OF PERFORMANCE OF FLUOROMETRIC OXYGEN ANALYZERS IN LIQUID MEDIA
    BS 4743(1979) : 1979 SPECIFICATION FOR SAFETY REQUIREMENTS FOR ELECTRONIC MEASURING APPARATUS
    BS IEC 61526 : 1998 RADIATION PROTECTION INSTRUMENTATION - MEASUREMENT OF PERSONAL DOSE EQUIVALENTS HP (10) AND HP (0,07) FOR X, GAMMA AND BETA RADIATIONS - DIRECT READING PERSONAL DOSE EQUIVALENT AND/OR DOSE EQUIVALENT RATE DOSEMETERS
    BS EN 61207-1:2010 Expression of performance of gas analyzers General
    BS EN 62282-3-200:2016 Fuel cell technologies Stationary fuel cell power systems. Performance test methods
    PREN 50463-3 : DRAFT 2015 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 3: DATA HANDLING
    14/30302399 DC : 0 BS EN 61982-4 - SECONDARY BATTERIES (EXCEPT LITHIUM) FOR THE PROPULSION OF ELECTRIC ROAD VEHICLES SAFETY REQUIREMENTS OF NICKEL-METAL HYDRIDE CELLS AND MODULES
    PREN 50463-2 : DRAFT 2015 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING
    I.S. EN 50463-1:2017 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 1: GENERAL
    BS EN ISO 18113-1:2011 IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS (ISO 18113-1:2009)
    BS EN 62754:2017 Computation of waveform parameter uncertainties
    IEC 60692:1999 Nuclear instrumentation - Density gauges utilizing ionizing radiation - Definitions and test methods
    08/30180629 DC : 0 BS EN 61557-13 - ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 13: HAND-HELD AND HAND-MANIPULATED CURRENT CLAMPS AND SENSORS FOR MEASUREMENT OF LEAKAGE CURRENTS IN ELECTRICAL DISTRIBUTION SYSTEMS
    BS EN 62129-1 : 2016 CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 1: OPTICAL SPECTRUM ANALYZERS
    00/201034 DC : DRAFT FEB 2000 BS EN 60896-1 ED.2 - STATIONARY LEAD-ACID BATTERIES - GENERAL REQUIREMENTS AND METHODS OF TEST - PART 1: VENTED TYPES
    BS EN 50379-3 : 2012 SPECIFICATION FOR PORTABLE ELECTRICAL APPARATUS DESIGNED TO MEASURE COMBUSTION FLUE GAS PARAMETERS OF HEATING APPLIANCES - PART 3: PERFORMANCE REQUIREMENTS FOR APPARATUS USED IN NON-STATUTORY SERVICING OF GAS FIRED HEATING APPLIANCES
    15/30329552 DC : 0 BS EN 50463-4 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 4: COMMUNICATION
    BS EN 61557-6:1998 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 6: EFFECTIVENESS OF RESIDUAL CURRENT DEVICES (RCD) IN TT, TN AND IT SYSTEMS
    11/30241212 DC : DRAFT JAN 2011 BS EN 60688 - ELECTRICAL MEASURING TRANSDUCERS FOR CONVERTING A.C. ELECTRICAL QUANTITIES TO ANALOGUE OR DIGITAL SIGNALS
    OIML V 2-200 : 2012 INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM)
    BS EN 50463-3:2017 (published 2017-10) Railway applications. Energy measurement on board train Data handling
    DIN EN 61268 : 1996 ALTERNATING CURRENT STATIC VAR-HOUR METERS FOR REACTIVE ENERGY (CLASSES 2 AND 3)
    PD IEC/TR 61000-1-6:2012 (published 2014-10) Electromagnetic compatibility (EMC) General. Guide to the assessment of measurement uncertainty
    12/30256017 DC : 0 BS EN 62586-2 - POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 2: FUNCTIONAL TESTS AND UNCERTAINTY REQUIREMENTS
    02/208756 DC : 0 IEC 61115, ED. 2 - EXPRESSION OF PERFORMANCE OF SAMPLE HANDLING SYSTEMS FOR PROCESS ANALYZERS
    I.S. EN 60051-1:2017 DIRECT ACTING INDICATING ANALOGUE ELECTRICAL MEASURING INSTRUMENTS AND THEIR ACCESSORIES - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS COMMON TO ALL PARTS - PROPOSED HORIZONTAL STANDARD
    PD IEC/TS 62282-7-2:2014 (published 2014-05) Fuel cell technologies Test methods. Single cell and stack performance tests for solid oxide fuel cells (SOFC)
    03/306274 DC : 0
    10/30234777 DC : 0 BS EN 61982 ED2 - SECONDARY BATTERIES (EXCEPT LITHIUM) FOR THE PROPULSION OF ELECTRIC ROAD VEHICLES - PERFORMANCE AND ENDURANCE TESTS
    10/30181171 DC : 0 BS EN 62586 - POWER QUALITY MONITORING DEVICES IN POWER SUPPLY SYSTEMS
    02/203214 DC : DRAFT MAR 2002 IEC 62282-3-2 - FUEL CELL TECHNOLOGIES - PART 3-2: STATIONARY FUEL CELL POWER PLANTS - TEST METHODS FOR THE PERFORMANCE
    BS EN 61036 : 1997 ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2)
    CEI EN 62522 : 2014 CALIBRATION OF TUNEABLE LASER SOURCES
    BS EN 62703:2013 (published 2013-11) Expression of performance of fluorometric oxygen analyzers in liquid media
    08/30152793 DC : DRAFT DEC 2008 BS IEC 62484 - RADIATION PROTECTION INSTRUMENTATION - SPECTROSCOPY-BASED PORTAL MONITORS USED FOR THE DETECTION AND IDENTIFICATION OF ILLICIT TRAFFICKING OF RADIOACTIVE MATERIAL
    CAN/CSA-C22.2 NO. 60896-21:17 Stationary lead-acid batteries — Part 21: Valve regulated types — Methods of test (Adopted IEC 60896-21:2004, first edition, 2004-02, with Canadian deviations) | Batteries stationnaires au plomb — Partie 21 : Types étanches à soupapes — Méthodes d’essai (norme IEC 60896-21:2004 adoptee, première édition, 2004-02, avec exigences propres au Canada)
    DIN VDE 0432-5 : 1987 HIGH-VOLTAGE TEST TECHNIQUES - PART 5: OSCILLOSCOPE AND PEAK VOLTMETERS FOR IMPULSE TEST
    BS EN 60896-11 : 2003 STATIONARY LEAD-ACID BATTERIES - PART 11: VENTED TYPES - GENERAL REQUIREMENTS AND METHODS OF TESTS
    BS EN 62387-1 : 2012 RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR ENVIRONMENTAL AND PERSONAL MONITORING - PART 1: GENERAL CHARACTERISTICS AND PERFORMANCE REQUIREMENTS (IEC 62387-1:2007, MODIFIED)
    BS EN 61326-1 : 2013 ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS
    07/30126760 DC : 0 IEC 61559-1 - RADIATION PROTECTION INSTRUMENTATION - INSTRUMENTATION AND CONTROL OF NUCLEAR FACILITIES - PART 1: CENTRALIZED SYSTEM FOR CONTINUOUS MONITORING OF RADIATION AND/OR LEVELS OF RADIOACTIVITY
    15/30329549 DC : 0 BS EN 50463-3 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 3: DATA HANDLING
    I.S. EN ISO 18113-1:2011 IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS (ISO 18113-1:2009)
    CEI EN 61098 : 2008 RADIATION PROTECTION INSTRUMENTATION - INSTALLED PERSONNEL SURFACE CONTAMINATION MONITORING ASSEMBLIES
    BS EN 62522:2014 (published 2014-08) Calibration of tuneable laser sources
    BS EN 60688:2013 Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals
    IEC 62754:2017 Computation of waveform parameter uncertainties
    UNE-ISO/IEC GUIA 99:2012 IN International vocabulary of metrology. Basics and general concepts and associated terms (VIM)
    BS 5868(1980) : 1980 GUIDE TO IONIZING RADIATION THICKNESS METERS FOR MATERIALS IN THE FORM OF SHEETS COATINGS OR LAMINATES
    NF EN 61526 : 2013 RADIATION PROTECTION INSTRUMENTATION - MEASUREMENT OF PERSONAL DOSE EQUIVALENTS H[P](10) AND H[P](0,07) FOR X, GAMMA, NEUTRON AND BETA RADIATIONS - DIRECT READING PERSONAL DOSE EQUIVALENT METERS
    06/30119052 DC : DRAFT MAR 2006 IEC 62387 - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR ENVIRONMENTAL AND PERSONAL MONITORING FOR EXTERNAL PHOTON AND BETA RADIATION USING ELECTRONIC DEVICES FOR THE DATA EVALUATION - PART 1: GENERAL CHARACTERISTICS AND PERFORMANCE REQUIREMENTS ON DOSIMETRY SYSTEMS
    BS EN 62586-1:2017 Power quality measurement in power supply systems Power quality instruments (PQI)
    03/318327 DC : DRAFT NOV 2003
    BS EN 50463-2 : 2017 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING
    BS PD CISPR/TR 16-4-1 : 2009 SPECIFICATIONS FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 4-1: UNCERTAINTIES, STATISTICS AND LIMIT MODELLING - UNCERTAINTIES IN STANDARDIZED EMC TESTS
    BS IEC 60532 : 2010 RADIATION PROTECTION INSTRUMENTATION - INSTALLED DOSE RATE METERS, WARNING ASSEMBLIES AND MONITORS - X AND GAMMA RADIATION OF ENERGY BETWEEN 50 KEV AND 7 MEV
    IEC 61306:1994 Nuclear instrumentation - Microprocessor based nuclear radiation measuring devices
    15/30329546 DC : 0 BS EN 50463-2 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING
    EN 61326-1:2013 ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS (IEC 61326-1:2012)
    I.S. EN 50463-5:2017 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 5: CONFORMITY ASSESSMENT
    BS IEC 61336 : 1996 NUCLEAR INSTRUMENTATION - THICKNESS MEASUREMENT SYSTEMS UTILIZING IONIZING RADIATION - DEFINITIONS AND TEST METHODS
    10/30216008 DC : 0 BS EN 61326-1 - ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS
    98/230636 DC : DRAFT MARCH 98 DRAFT IEC 61010-2-031 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT CONTROL AND LABORATORY USE 2-031: SAFETY REQUIREMENTS FOR HAND-HELD PROBE ASSEMBLIES FOR ELECTRICAL MEASUREMENT TEST
    08/30157876 DC : 0
    BS IEC 62244 : 2006 RADIATION PROTECTION INSTRUMENTATION - INSTALLED RADIATION MONITORS FOR THE DETECTION OF RADIOACTIVE AND SPECIAL NUCLEAR MATERIALS AT NATIONAL BORDERS
    03/309903 DC : DRAFT JUNE 2003 IEC 61315 ED.2.0 - CALIBRATION OF FIBRE-OPTIC POWER METERS
    15/30327724 DC : 0 BS EN 62586-2 - POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 2: FUNCTIONAL TESTS AND UNCERTAINTY REQUIREMENTS
    ISO/IEC Guide 99:2007 International vocabulary of metrology Basic and general concepts and associated terms (VIM)
    ISA S82.01 : 1994 ELECTRICAL AND ELECTRONIC TEST, MEASURING, CONTROLLING AND RELATED EQUIPMENT - GENERAL REQUIREMENTS
    18/30342107 DC : DRAFT APR 2018 BS EN 61315 - CALIBRATION OF FIBRE-OPTIC POWER METERS
    BS EN 50463 : 2007 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS
    07/30162401 DC : 0 BS EN 61207-1 - EXPRESSION OF PERFORMANCE OF GAS ANALYZERS - PART 1: GENERAL
    BS EN 61056-1 : 2012 GENERAL PURPOSE LEAD-ACID BATTERIES (VALVE-REGULATED TYPES) - PART 1: GENERAL REQUIREMENTS, FUNCTIONAL CHARACTERISTICS - METHODS OF TEST
    15/30329543 DC : 0 BS EN 50463-1 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 1: GENERAL
    CEI EN 50379-3 : 2012 SPECIFICATION FOR PORTABLE ELECTRICAL APPARATUS DESIGNED TO MEASURE COMBUSTION FLUE GAS PARAMETERS OF HEATING APPLIANCES - PART 3: PERFORMANCE REQUIREMENTS FOR APPARATUS USED IN NON-STATUTORY SERVICING OF GAS FIRED HEATING APPLIANCES
    14/30298027 DC : 0 BS EN 61069-4 ED 2.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 4: ASSESSMENT OF SYSTEM PERFORMANCE
    CEI EN 61982 : 2014 SECONDARY BATTERIES (EXCEPT LITHIUM) FOR THE PROPULSION OF ELECTRIC ROAD VEHICLES - PERFORMANCE AND ENDURANCE TESTS
    BS EN 60051-1:2017 Direct acting indicating analogue electrical measuring instruments and their accessories Definitions and general requirements common to all parts
    BS EN 62387:2016 Radiation protection instrumentation. Passive integrating dosimetry systems for individual, workplace and environmental monitoring of photon and beta radiation
    11/30244172 DC : 0 BS EN 61326-1 IEC 61326-1 ED. 2 - ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS
    BS EN 61557-1:2007 (published 2007-06) Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures General requirements
    PREN 50463-4 : DRAFT 2015 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 4: COMMUNICATION
    03/119704 DC : DRAFT DEC 2003 IEC 61427 ED.2 - SECONDARY CELLS AND BATTERIES FOR SOLAR PHOTOVOLTAIC ENERGY SYSTEMS - GENERAL REQUIREMENTS AND METHODS OF TEST
    IEC 61256:1996 Radiation protection instrumentation - Installed monitors for the detection of radioactive contamination of laundry
    02/205824 DC : 0 PREN 50 XXX - BASIC STANDARD ON MEASUREMENT AND CALCULATION PROCEDURES FOR HUMAN EXPOSURE TO ELECTRIC, MAGNETIC AND ELECTROMAGNETIC FIELDS (0 HZ - 300 GHZ)
    04/30078214 DC : DRAFT AUG 2004 IEC 61577-1 - RADIATION PROTECTION INSTRUMENTATION - RADON AND RADON DECAY PRODUCT MEASURING INSTRUMENTS - PART 1: GENERAL PRINCIPLES
    BS ISO 12764:2017 Measurement of fluid flow in closed conduits. Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
    CEI EN 50379-2 : 2012 SPECIFICATION FOR PORTABLE ELECTRICAL APPARATUS DESIGNED TO MEASURE COMBUSTION FLUE GAS PARAMETERS OF HEATING APPLIANCES - PART 2: PERFORMANCE REQUIREMENTS FOR APPARATUS USED IN STATUTORY INSPECTIONS AND ASSESSMENT
    BS ISO TR 12764 : 1997 MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - FLOWRATE MEASUREMENT BY MEANS OF VORTEX SHEDDING FLOWMETERS INSERTED IN CIRCULAR CROSS-SECTION CONDUITS RUNNING FULL
    EN 62754 : 2017 COMPUTATION OF WAVEFORM PARAMETER UNCERTAINTIES (IEC 62754:2017)
    BS EN 62008:2005 Performance characteristics and caliberation for digital data acquisition systems and relevant software
    I.S. EN 61315:2006 CALIBRATION OF FIBRE-OPTIC POWER METERS
    04/30125174 DC : DRAFT NOV 2004 IEC 61557-1 ED2 - ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. V D.C. EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 1: GENERAL REQUIREMENTS
    CEI EN 60051-1 : 1999 DIRECT ACTING INDICATING ANALOGUE ELECTRICAL MEASURING INSTRUMENTS AND THEIR ACCESSORIES - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS COMMON TO ALL PARTS
    BS EN 60896-22 : 2004 STATIONARY LEAD-ACID BATTERIES - PART 22: VALVE REGULATED TYPES - REQUIREMENTS
    I.S. EN 61982-4:2016 SECONDARY BATTERIES (EXCEPT LITHIUM) FOR THE PROPULSION OF ELECTRIC ROAD VEHICLES - PART 4: SAFETY REQUIREMENTS OF NICKEL-METAL HYDRIDE CELLS AND MODULES
    CEI EN 62052-11 : 2003 ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 11: METERING EQUIPMENT
    IEC 61557-12:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD)
    BS EN 61268 : 1996 ALTERNATING CURRENT STATIC VAR-HOUR METERS FOR REACTIVE ENERGY (CLASSES 2 AND 3)
    BS EN 50379-1 : 2012 SPECIFICATION FOR PORTABLE ELECTRICAL APPARATUS DESIGNED TO MEASURE COMBUSTION FLUE GAS PARAMETERS OF HEATING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
    09/30150998 DC : 0
    BS EN 61982-2 : 2002 SECONDARY BATTERIES FOR THE PROPULSION OF ELECTRIC ROAD VEHICLES - DYNAMIC DISCHARGE PERFORMANCE TEST AND DYNAMIC ENDURANCE TEST
    CEI EN 50463-4 : 2013 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 4: COMMUNICATION
    18/30332114 DC : 0 BS EN 50591 - SPECIFICATION AND VERIFICATION OF ENERGY CONSUMPTION FOR RAILWAY ROLLING STOCK
    CEI EN 61526 : 2013 RADIATION PROTECTION INSTRUMENTATION - MEASUREMENT OF PERSONAL DOSE EQUIVALENTS HP(10) AND HP(0,07) FOR X, GAMMA, NEUTRON AND BETA RADIATIONS - DIRECT READING PERSONAL DOSE EQUIVALENT METERS
    04/30039291 DC : DRAFT NOV 2004
    NFE 18 152 : 2000 CENTRAL ACQUISITION SYSTEMS OF TIME/TEMPERATURE VALUES FOR STORAGE AND DISTRIBUTION OF CHILLED, FROZEN REFRIGERATED, QUICK-FROZEN FOODSTUFFS AND ICE CREAMS - TECHNICAL REQUIREMENTS
    ISO/TR 12764:1997 Measurement of fluid flow in closed conduits Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
    BS EN 61326 : 1998 ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS
    15/30327720 DC : 0 BS EN 62586-1 - POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 1: POWER QUALITY INSTRUMENTS (PQI)
    BS QC790101(1992) : 1992 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - SEMICONDUCTOR DEVICES - INTEGRATED CIRCUITS - SECTIONAL SPECIFICATION FOR SEMICONDUCTOR INTEGRATED CIRCUITS EXCLUDING HYBRID CIRCUITS - INTERNAL VISUAL EXAMINATION FOR SEMICONDUCTOR INTEGRATED CIRCUITS EXCLUDING HYBRID CIRCUITS
    BS EN 62282-3-2 : 2006 FUEL CELL TECHNOLOGIES - PART 3-2: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS
    BS EN 62129 : 2006 CALIBRATION OF OPTICAL SPECTRUM ANALYZERS
    EN 50463-2:2017 (edition 2) Railway applications - Energy measurement on board trains - Part 2: Energy measuring
    PREN 50463-1 : DRAFT 2015 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 1: GENERAL
    UNE-EN 61557-12:2010 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures -- Part 12: Performance measuring and monitoring devices (PMD)
    CEI UNI EN 45510-2-4 : 2000 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-4: ELECTRICAL EQUIPMENT - HIGH POWER STATIC CONVERTORS
    EN 50463-4:2017 (edition 2) Railway applications - Energy measurement on board trains - Part 4: Communication
    I.S. EN 62586-2:2017 POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 2: FUNCTIONAL TESTS AND UNCERTAINTY REQUIREMENTS
    I.S. EN 62129-1:2016 CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 1: OPTICAL SPECTRUM ANALYZERS
    NF EN 62282 3-2 : 2006 FUEL CELL TECHNOLOGIES - PART 3-2: STATIONARY FUEL CELL POWER PLANTS - PERFORMANCE TEST METHODS
    UNI CEI 70099 : 2008 INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM)
    ISO 12764:2017 Measurement of fluid flow in closed conduits — Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
    IEC 61526:2010 Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations - Direct reading personal dose equivalent meters
    BS EN 61526 : 2013 RADIATION PROTECTION INSTRUMENTATION - MEASUREMENT OF PERSONAL DOSE EQUIVALENTS HP(10) AND HP(0,07) FOR X, GAMMA, NEUTRON AND BETA RADIATIONS - DIRECT READING PERSONAL DOSE EQUIVALENT METERS
    I.S. EN 62522:2014 CALIBRATION OF TUNEABLE LASER SOURCES
    CEI CLC/TS 50591 : 2014 SPECIFICATION AND VERIFICATION OF ENERGY CONSUMPTION FOR RAILWAY ROLLING STOCK
    CAN/CSA-C22.2 NO. 60896-11:17 Stationary lead-acid batteries — Part 11: Vented types — General requirements and methods of tests (Adopted IEC 60896-11:2002, first edition, 2002-12, with Canadian deviations) | Batteries stationnaires au plomb — Partie 11 : Batteries au plomb du type ouvert — Prescriptions générales et méthodes d’essai (norme IEC 60896-11:2002 adoptée, première édition, 2002-12, avec exigences propres au Canada)
    CEI EN 50470-1 : 2007 ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C)
    NF EN 62052-11 : 2003 AMD 1 2017 ELECTRICITY METERING EQUIPMENT (A.C.) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 11: METERING EQUIPMENT
    EN 50463-5:2017 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 5: CONFORMITY ASSESSMENT
    UNE EN 62586-2 : 2014 POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 2: FUNCTIONAL TESTS AND UNCERTAINTY REQUIREMENTS
    CEI EN 50463-1 : 2013 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 1: GENERAL
    I.S. EN 61115:1994 EXPRESSION OF PERFORMANCE OF SAMPLE HANDLING SYSTEMS FOR PROCESS ANALYZERS
    BIS IS 14976 : 2012 CALIBRATION OF FIBRE-OPTIC POWER METERS
    CEI EN 61557-13 : 2012 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 13: HAND-HELD AND HAND-MANIPULATED CURRENT CLAMPS AND SENSORS FOR MEASUREMENT OF LEAKAGE CURRENTS IN ELECTRICAL DISTRIBUTION SYSTEMS
    CEI UNI 70099 : 2010 INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM)
    CEI EN 50463-3 : 2013 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 3: DATA HANDLING
    CEI EN 60746-1 : 2003 EXPRESSION OF PERFORMANCE OF ELECTROCHEMICAL ANALYZERS - PART 1: GENERAL
    EN 50463-3:2017 (edition 2) Railway applications - Energy measurement on board trains - Part 3: Data handling
    I.S. EN 62703:2013 EXPRESSION OF PERFORMANCE OF FLUOROMETRIC OXYGEN ANALYZERS IN LIQUID MEDIA (IEC 62703:2013 (EQV))
    I.S. EN 61069-4:2016 INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 4: ASSESSMENT OF SYSTEM PERFORMANCE
    BS EN 60896-21 : 2004 STATIONARY LEAD-ACID BATTERIES - PART 21: VALVE REGULATED TYPES - METHODS OF TEST
    I.S. EN 60746-1:2003 EXPRESSION OF PERFORMANCE OF ELECTROCHEMICAL ANALYZERS - PART 1: GENERAL
    S.R. CLC/TS 50591:2013 SPECIFICATION AND VERIFICATION OF ENERGY CONSUMPTION FOR RAILWAY ROLLING STOCK
    BS EN 50470-1 : 2006 ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C)
    I.S. EN 50463-3:2017 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 3: DATA HANDLING
    EN 50463-1:2017 (edition 2) Railway applications - Energy measurement on board trains - Part 1: General
    CEI EN 61315 : 2007 CALIBRATION OF FIBRE-OPTIC POWER METERS
    CEI EN 50463-2 : 2013 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING
    I.S. EN 50470-1:2006 ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C)
    I.S. EN 60846-1:2014 RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION - PART 1: PORTABLE WORKPLACE AND ENVIRONMENTAL METERS AND MONITORS
    I.S. EN 60896-11:2003 STATIONARY LEAD-ACID BATTERIES - PART 11: VENTED TYPES - GENERAL REQUIREMENTS AND METHODS OF TESTS
    BS ISO 14511:2001 MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - THERMAL MASS FLOWMETERS
    I.S. EN 62282-3-2:2006 FUEL CELL TECHNOLOGIES - PART 3-2: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS
    I.S. EN 62282-3-200:2016 FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS
    EN 50470-1:2006 ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C)
    I.S. EN 62586-1:2017 POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 1: POWER QUALITY INSTRUMENTS (PQI)
    I.S. EN 61557-1:2007 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 1: GENERAL REQUIREMENTS
    CEI EN 50379-1 : 2012 SPECIFICATION FOR PORTABLE ELECTRICAL APPARATUS DESIGNED TO MEASURE COMBUSTION FLUE GAS PARAMETERS OF HEATING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
    CEI UNI EN 45510-2-2 : 1999 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-2: ELECTRICAL EQUIPMENT - UNINTERRUPTIBLE POWER SUPPLIES
    IEC 62888-4:2018 Railway applications - Energy measurement on board trains - Part 4: Communication
    I.S. EN 62387:2016 RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR INDIVIDUAL, WORKPLACE AND ENVIRONMENTAL MONITORING OF PHOTON AND BETA RADIATION
    I.S. EN 61187:1995 ELECTRICAL AND ELECTRONIC MEASURING EQUIPMENT DOCUMENTATION
    I.S. EN 62244:2011 RADIATION PROTECTION INSTRUMENTATION - INSTALLED RADIATION MONITORS FOR THE DETECTION OF RADIOACTIVE AND SPECIAL NUCLEAR MATERIALS AT NATIONAL BORDERS
    I.S. EN 62387-1:2012 RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR ENVIRONMENTAL AND PERSONAL MONITORING - PART 1: GENERAL CHARACTERISTICS AND PERFORMANCE REQUIREMENTS (IEC 62387-1:2007 (MOD))
    I.S. EN 60688:2013 ELECTRICAL MEASURING TRANSDUCERS FOR CONVERTING A.C. AND D.C. ELECTRICAL QUANTITIES TO ANALOGUE OR DIGITAL SIGNALS (IEC 60688:2012 (EQV))
    UNE-EN 50379-2:2013 Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 2: Performance requirements for apparatus used in statutory inspections and assessment
    I.S. EN 61557-12:2008 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 12: PERFORMANCE MEASURING AND MONITORING DEVICES (PMD)
    I.S. EN 61098:2007 RADIATION PROTECTION INSTRUMENTATION - INSTALLED PERSONNEL SURFACE CONTAMINATION MONITORING ASSEMBLIES
    BS 6146-1(1981) : 1981 AN INTERFACE SYSTEM FOR PROGRAMMABLE MEASURING INSTRUMENTS (BYTE SERIAL BIT PARALLEL) - SPECIFICATION FOR FUNCTIONAL ELECTRICAL AND MECHANICAL REQUIREMENTS, SYSTEM APPLIANCES AND REQUIREMENTS SYSTEM APPLIANCES AND REQUIREMENTS FOR DESIGNER AND USER
    IEC 62522:2014 Calibration of tuneable laser sources
    UNE-EN 50379-1:2012 Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 1: General requirements and test methods
    CEI EN 61557-1 : 2008 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 1: GENERAL REQUIREMENTS
    I.S. EN 62754:2017 COMPUTATION OF WAVEFORM PARAMETER UNCERTAINTIES
    NF EN 62244 : 2011 RADIATION PROTECTION INSTRUMENTATION - INSTALLED RADIATION MONITORS FOR THE DETECTION OF RADIOACTIVE AND SPECIAL NUCLEAR MATERIALS AT NATIONAL BORDERS
    NF EN 50463 : 2008 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS
    UNI EN ISO 18113-1 : 2012 IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS
    IEC 62888-3:2018 Railway applications - Energy measurement on board trains - Part 3: Data handling
    I.S. EN 61056-1:2012 GENERAL PURPOSE LEAD-ACID BATTERIES (VALVE-REGULATED TYPES) - PART 1: GENERAL REQUIREMENTS, FUNCTIONAL CHARACTERISTICS - METHODS OF TEST (IEC 61056-1:2012 (EQV))
    ISO 20456:2017 Measurement of fluid flow in closed conduits — Guidance for the use of electromagnetic flowmeters for conductive liquids
    IEC 61017-2:1994 Radiation protection instrumentation - Portable, transportable or installed equipment to measure X or gamma radiation for environmental monitoring - Part 2: Integrating assemblies
    CAN/CSA-C22.2 NO. 60896-22:17 Stationary lead-acid batteries — Part 22: Valve regulated types - Requirements (Adopted IEC 60896-22:2004, first edition, 2004-02, with Canadian deviations) | Batteries stationnaires au plomb - Partie 22 : Types étanches à soupapes - Exigences (norme IEC 60896-22:2004 adoptée, première édition, 2004-02, avec exigences propres au Canada)
    IEC 61874:1998 NUCLEAR INSTRUMENTATION - GEOPHYSICAL BOREHOLE INSTRUMENTATION TO DETERMINE ROCK DENSITY ('DENSITY LOGGING')
    IEC 61283:1995 Radiation protection instrumentation - Direct reading personal dose equivalent (rate) monitors - X, gamma and high energy beta radiation
    I.S. EN 61036:1997 ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2)
    PREN 50591 : DRAFT 2018 SPECIFICATION AND VERIFICATION OF ENERGY CONSUMPTION FOR RAILWAY ROLLING STOCK
    UNE-EN 50463-5:2013 Railway applications - Energy measurement on board trains - Part 5: Conformity assessment
    CEI EN 60896-11 : 2004 STATIONARY LEAD-ACID BATTERIES - PART 11: VENTED TYPES GENERAL REQUIREMENTS AND METHODS OF TESTS
    CEI EN 61557-12 : 2013 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 12: PERFORMANCE MEASURING AND MONITORING DEVICES (PMD)
    IEC 61323:1995 Radiation protection instrumentation - Neutron radiation - Direct reading personal dose equivalent and/or dose equivalent rate monitors
    CEI EN 61557-6 : 2008 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 6: EFFECTIVENESS OF RESIDUAL CURRENT DEVICES (RCD) IN TT, TN AND IT SYSTEMS
    I.S. EN 50463-4:2017 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 4: COMMUNICATION
    I.S. EN 50379-2:2012 SPECIFICATION FOR PORTABLE ELECTRICAL APPARATUS DESIGNED TO MEASURE COMBUSTION FLUE GAS PARAMETERS OF HEATING APPLIANCES - PART 2: PERFORMANCE REQUIREMENTS FOR APPARATUS USED IN STATUTORY INSPECTIONS AND ASSESSMENT
    CEI UNI EN 45510-2-3 : 2000 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-3: ELECTRICAL EQUIPMENT - STATIONARY BATTERIES AND CHARGERS
    IEC 60532:2010 Radiation protection instrumentation - Installed dose rate meters, warning assemblies and monitors - X and gamma radiation of energy between 50 keV and 7 MeV
    IEC 62244:2006 Radiation protection instrumentation - Installed radiation monitors for the detection of radioactive and special nuclear materials at national borders
    I.S. EN 61557-6:2007 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 6: EFFECTIVENESS OF RESIDUAL CURRENT DEVICES (RCD) IN TT, TN AND IT SYSTEMS
    IEC 62792:2015 Measurement method for the output of electroshock weapons
    BS EN 60846-1:2014 (published 2014-09) Radiation protection instrumentation. Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation Portable workplace and environmental meters and monitors
    I.S. EN 50463-2:2017 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING
    BS EN 50379-2 : 2012 SPECIFICATION FOR PORTABLE ELECTRICAL APPARATUS DESIGNED TO MEASURE COMBUSTION FLUE GAS PARAMETERS OF HEATING APPLIANCES - PART 2: PERFORMANCE REQUIREMENTS FOR APPARATUS USED IN STATUTORY INSPECTIONS AND ASSESSMENT
    16/30333424 DC : 0 BS ISO 12764 - MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - FLOWRATE MEASUREMENT BY MEANS OF VORTEX SHEDDING FLOWMETERS INSERTED IN CIRCULAR CROSS-SECTION CONDUITS RUNNING FULL
    UNE-EN 50463-1:2013 Railway applications - Energy measurement on board trains - Part 1: General
    UNE-EN ISO 18113-1:2012 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009)
    IEC TR 61000-1-6:2012 Electromagnetic compatibility (EMC) - Part 1-6: General - Guide to the assessment of measurement uncertainty
    UNE-EN 61557-13:2012 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 13: Hand-held and hand-manipulated current clamps and sensors for measurement of leakage currents in electrical distribution systems
    04/19975018 DC : DRAFT AUG 2004
    IEC 62387-1:2007 Radiation protection instrumentation - Passive integrating dosimetry systems for environmental and personal monitoring - Part 1: General characteristics and performance requirements
    IEC TS 62129-3:2014 Calibration of wavelength/optical frequency measurement instruments - Part 3: Optical frequency meters using optical frequency combs
    ISO 14511:2001 Measurement of fluid flow in closed conduits Thermal mass flowmeters
    I.S. EN 61526:2013 RADIATION PROTECTION INSTRUMENTATION - MEASUREMENT OF PERSONAL DOSE EQUIVALENTS H[P](10) AND H[P](0,07) FOR X, GAMMA, NEUTRON AND BETA RADIATIONS - DIRECT READING PERSONAL DOSE EQUIVALENT METERS (IEC 61526:2010 (MOD))
    I.S. EN 60896-22:2004 STATIONARY LEAD-ACID BATTERIES - PART 22: VALVE REGULATED TYPES - REQUIREMENTS
    IEC 62586-1:2017 Power quality measurement in power supply systems - Part 1: Power quality instruments (PQI)
    IEC 61137:1992 Radiation protection instrumentation - Installed personnel surface contamination monitoring assemblies - Low energy X and gamma emitters
    IEC 61336:1996 Nuclear instrumentation - Thickness measurement systems utilizingionizing radiation - Definitions and test methods
    I.S. EN 61557-13:2011 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 13: HAND-HELD AND HAND-MANIPULATED CURRENT CLAMPS AND SENSORS FOR MEASUREMENT OF LEAKAGE CURRENTS IN ELECTRICAL DISTRIBUTION SYSTEMS (IEC 61557-13:2011 (EQV))
    IEC 61066:2006 Thermoluminescence dosimetry systems for personal and environmental monitoring
    CISPR TR 16-4-1:2009 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-1: Uncertainties, statistics and limit modelling - Uncertainties in standardized EMC tests
    I.S. EN 50379-3:2012 SPECIFICATION FOR PORTABLE ELECTRICAL APPARATUS DESIGNED TO MEASURE COMBUSTION FLUE GAS PARAMETERS OF HEATING APPLIANCES - PART 3: PERFORMANCE REQUIREMENTS FOR APPARATUS USED IN NON-STATUTORY SERVICING OF GAS FIRED HEATING APPLIANCES
    IEC 61187:1993 Electrical and electronic measuring equipment - Documentation
    I.S. EN 50379-1:2012 SPECIFICATION FOR PORTABLE ELECTRICAL APPARATUS DESIGNED TO MEASURE COMBUSTION FLUE GAS PARAMETERS OF HEATING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
    I.S. EN 50463:2007 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS
    IEC 61239:1993 NUCLEAR INSTRUMENTATION - PORTABLE GAMMA RADIATION METERS AND SPECTROMETERS USED FOR PROSPECTING - DEFINITIONS, REQUIREMENTS AND CALIBRATION
    I.S. EN 61207-1:2010 EXPRESSION OF PERFORMANCE OF GAS ANALYZERS - PART 1: GENERAL
    EN 62586-2:2017 POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 2: FUNCTIONAL TESTS AND UNCERTAINTY REQUIREMENTS (IEC 62586-2:2017)
    IEC 61525:1996 Radiation protection instrumentation - X, gamma, high energy betaand neutron radiations - Direct reading personal dose equivalentand/or dose equivalent rate monitors
    IEC 61584:2001 Radiation protection instrumentation - Installed, portable or transportable assemblies - Measurement of air kerma direction and air kerma rate
    IEC 62888-1:2018 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 1: GENERAL
    IEC 60051-1:2016 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts
    I.S. EN 62008:2005 PERFORMANCE CHARACTERISTICS AND CALIBRATION METHODS FOR DIGITAL DATA ACQUISITION SYSTEMS AND RELEVANT SOFTWARE
    DIN EN ISO 6817:1995-11 MEASUREMENT OF CONDUCTIVE LIQUID FLOW IN CLOSED CONDUITS; METHODS USING ELECTROMAGNETIC FLOW-METERS
    ISO 6817:1992 Measurement of conductive liquid flow in closed conduits Method using electromagnetic flowmeters
    IEC 62282-3-2:2006 Fuel cell technologies - Part 3-2: Stationary fuel cell power systems - Performance test methods
    BS EN 45510-2-2 : 1999 GUIDE FOR THE PROCUREMENT OF POWER STATION EQUIPMENT - ELECTRICAL EQUIPMENT - UNINTERRUPTIBLE POWER SUPPLIES
    IEC 62282-3-200:2015 Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods
    UNE-EN 61056-1:2013 General purpose lead-acid batteries (valve-regulated types) - Part 1: General requirements, functional characteristics - Methods of test
    IEC 61115:1992 Expression of performance of sample handling systems for process analyzers
    IEC 60687:1992 Alternating current static watt-hour meters for active energy (classes 0,2 S and 0,5 S)
    IEC 60896-11:2002 Stationary lead-acid batteries - Part 11: Vented types - General requirements and methods of tests
    IEC 62129:2006 Calibration of optical spectrum analyzers
    IEC 62008:2005 Performance characteristics and calibration methods for digital data acquisition systems and relevant software
    IEC 61982:2012 Secondary batteries (except lithium) for the propulsion of electric road vehicles - Performance and endurance tests
    IEC 62052-11:2003+AMD1:2016 CSV Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 11: Metering equipment
    IEC 60896-22:2004 Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements
    IEC 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media
    IEC 61982-4:2015 Secondary batteries (except lithium) for the propulsion of electric road vehicles - Part 4: Safety requirements of nickel-metal hydride cells and modules
    IEC 61557-13:2011 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 13: Hand-held and hand-manipulated current clamps and sensors for measurement of leakage currents in electrical distribution systems
    IEC 61056-1:2012 General purpose lead-acid batteries (valve-regulated types) - Part 1: General requirements, functional characteristics - Methods of test
    IEC 60688:2012 Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals
    IEC 61268:1995 Alternating current static var-hour meters for reactive energy (classes 2 and 3)
    IEC 61557-6:2007 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 6: EFFECTIVENESS OF RESIDUAL CURRENT DEVICES (RCD) IN TT, TN AND IT SYSTEMS
    IEC 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers
    IEC 61982-2 : 1.0 SECONDARY BATTERIES FOR THE PROPULSION OF ELECTRIC ROAD VEHICLES - PART 2: DYNAMIC DISCHARGE PERFORMANCE TEST AND DYNAMIC ENDURANCE TEST
    IEC TR 61869-103:2012 Instrument transformers - The use of instrument transformers for power quality measurement
    IEC 61207-1:2010 Expression of performance of gas analyzers - Part 1: General
    ISO 18113-1:2009 In vitro diagnostic medical devices Information supplied by the manufacturer (labelling) Part 1: Terms, definitions and general requirements
    IEC 61315:2005 Calibration of fibre-optic power meters
    IEC 60746-1:2003 Expression of performance of electrochemical analyzers - Part 1: General
    IEC 60896-21:2004 Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test
    IEC 61557-1:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements
    UNE-EN 60688:2013 Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals
    IEC 61069-4:2016 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 4: Assessment of system performance
    OVE/ONORM EN 61315 : 2006 CALIBRATION OF FIBRE-OPTIC POWER METERS
    I.S. EN ISO 6817:1996 MEASUREMENT OF CONDUCTIVE LIQUID FLOW IN CLOSED CIRCUITS - METHODS USING ELECTROMAGNETIC FLOWMETERS
    IEC 61326-1:2012 RLV Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
    EN 62244 : 2011 RADIATION PROTECTION INSTRUMENTATION - INSTALLED RADIATION MONITORS FOR THE DETECTION OF RADIOACTIVE AND SPECIAL NUCLEAR MATERIALS AT NATIONAL BORDERS
    EN 60896-22 : 2004 STATIONARY LEAD-ACID BATTERIES - PART 22: VALVE REGULATED TYPES - REQUIREMENTS
    EN 61268 : 1996 ALTERNATING CURRENT STATIC VAR-HOUR METERS FOR REACTIVE ENERGY (CLASSES 2 AND 3)
    BS 4743:1979 Specification for safety requirements for electronic measuring apparatus
    EN 61187:1994/corrigendum:1995 ELECTRICAL AND ELECTRONIC MEASURING EQUIPMENT - DOCUMENTATION
    EN 50379-3:2012 SPECIFICATION FOR PORTABLE ELECTRICAL APPARATUS DESIGNED TO MEASURE COMBUSTION FLUE GAS PARAMETERS OF HEATING APPLIANCES - PART 3: PERFORMANCE REQUIREMENTS FOR APPARATUS USED IN NON-STATUTORY SERVICING OF GAS FIRED HEATING APPLIANCES
    CLC/TS 50591 : 2013 SPECIFICATION AND VERIFICATION OF ENERGY CONSUMPTION FOR RAILWAY ROLLING STOCK
    EN 61207-1 : 2010 EXPRESSION OF PERFORMANCE OF GAS ANALYZERS - PART 1: GENERAL
    EN 50379-1:2012 Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 1: General requirements and test methods
    EN 62008 : 2005 PERFORMANCE CHARACTERISTICS AND CALIBRATION METHODS FOR DIGITAL DATA ACQUISITION SYSTEMS AND RELEVANT SOFTWARE
    EN 61056-1:2012 GENERAL PURPOSE LEAD-ACID BATTERIES (VALVE-REGULATED TYPES) - PART 1: GENERAL REQUIREMENTS, FUNCTIONAL CHARACTERISTICS - METHODS OF TEST
    EN 6081996-2 : 1996 STATIONARY LEAD-ACID BATTERIES - GENERAL REQUIREMENTS AND METHODS OF TEST - VALVE REGULATED TYPES
    UNE-EN 62586-2:2014 Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements
    EN 62387-1 : 2012 RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR ENVIRONMENTAL AND PERSONAL MONITORING - PART 1: GENERAL CHARACTERISTICS AND PERFORMANCE REQUIREMENTS (IEC 62387-1:2007, MODIFIED)
    EN 60687:1992/corrigendum:1993 ALTERNATING CURRENT STATIC WATT HOUR METERS FOR ACTIVE ENERGY (CLASSES 0.2S AND 0.5S)
    EN 61982-2 : 2002 SECONDARY BATTERIES FOR THE PROPULSION OF ELECTRIC ROAD VEHICLE - DYNAMIC DISCHARGE PERFORMANCE TEST AND DYNAMIC ENDURANCE TEST
    EN 62586-1:2017 POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 1: POWER QUALITY INSTRUMENTS (PQI) (IEC 62586-1:2017)
    EN 62387 : 2016 RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR INDIVIDUAL, WORKPLACE AND ENVIRONMENTAL MONITORING OF PHOTON AND BETA RADIATION (IEC 62387:2012, MODIFIED)
    EN 61982-4 : 2016 SECONDARY BATTERIES (EXCEPT LITHIUM) FOR THE PROPULSION OF ELECTRIC ROAD VEHICLES - PART 4: SAFETY REQUIREMENTS OF NICKEL-METAL HYDRIDE CELLS AND MODULES
    EN 62129:2006/corrigendum:2006 CALIBRATION OF OPTICAL SPECTRUM ANALYZERS
    EN 62129-1 : 2016 CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 1: OPTICAL SPECTRUM ANALYZERS (IEC 62129-1:2016)
    EN 62282-3-200:2016 (edition 2) Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods
    EN 60746-1 : 2003 EXPRESSION OF PERFORMANCE OF ELECTROCHEMICAL ANALYZERS - PART 1: GENERAL
    EN 61069-4:2016 INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 4: ASSESSMENT OF SYSTEM PERFORMANCE
    EN 60688:2013 ELECTRICAL MEASURING TRANSDUCERS FOR CONVERTING A.C. AND D.C. ELECTRICAL QUANTITIES TO ANALOGUE OR DIGITAL SIGNALS (IEC 60688:2012)
    EN 62282-3-2 : 2006 FUEL CELL TECHNOLOGIES - PART 3-2: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS
    EN 61036:1996/A1:2000 ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2)
    EN 62703 : 2013 EXPRESSION OF PERFORMANCE OF FLUOROMETRIC OXYGEN ANALYZERS IN LIQUID MEDIA
    EN 60846-1 : 2014 RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION - PART 1: PORTABLE WORKPLACE AND ENVIRONMENTAL METERS AND MONITORS (IEC 60846-1:2009, MODIFIED)
    EN 61557-12 : 2008 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 12: PERFORMANCE MEASURING AND MONITORING DEVICES (PMD)
    EN 50379-2:2012 SPECIFICATION FOR PORTABLE ELECTRICAL APPARATUS DESIGNED TO MEASURE COMBUSTION FLUE GAS PARAMETERS OF HEATING APPLIANCES - PART 2: PERFORMANCE REQUIREMENTS FOR APPARATUS USED IN STATUTORY INSPECTIONS AND ASSESSMENT
    EN 61326:1997/A3:2003
    EN 60896-1:1991/A2:1992 STATIONARY LEAD-ACID BATTERIES - GENERAL REQUIREMENTS AND METHODS OF TEST - VENTED TYPES
    EN 61982 : 2012 SECONDARY BATTERIES (EXCEPT LITHIUM) FOR THE PROPULSION OF ELECTRIC ROAD VEHICLES - PERFORMANCE AND ENDURANCE TESTS (IEC 61982:2012)
    EN 61115 : 1993 EXPRESSION OF PERFORMANCE OF SAMPLE HANDLING SYSTEMS FOR PROCESS ANALYZERS
    EN 50463 : 2007 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS
    EN 61557-1:2007 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 1: GENERAL REQUIREMENTS
    EN 62522 : 2014 CALIBRATION OF TUNEABLE LASER SOURCES (IEC 62522:2014)
    EN 61315:2006 Calibration of fibre-optic power meters
    EN 61098:2007 RADIATION PROTECTION INSTRUMENTATION - INSTALLED PERSONNEL SURFACE CONTAMINATION MONITORING ASSEMBLIES
    EN 60896-11 : 2003 STATIONARY LEAD-ACID BATTERIES - PART 11: VENTED TYPES - GENERAL REQUIREMENTS AND METHODS OF TESTS
    EN 60896-21 : 2004 STATIONARY LEAD-ACID BATTERIES - PART 21: VALVE REGULATED TYPES - METHODS OF TEST
    EN 61557-6:2007 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 6: EFFECTIVENESS OF RESIDUAL CURRENT DEVICES (RCD) IN TT, TN AND IT SYSTEMS
    EN 60051-1:2017 DIRECT ACTING INDICATING ANALOGUE ELECTRICAL MEASURING INSTRUMENTS AND THEIR ACCESSORIES - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS COMMON TO ALL PARTS (IEC 60051-1:2016)
    EN 61557-13 : 2011 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 13: HAND-HELD AND HAND-MANIPULATED CURRENT CLAMPS AND SENSORS FOR MEASUREMENT OF LEAKAGE CURRENTS IN ELECTRICAL DISTRIBUTION SYSTEMS (IEC 61557-13:2011)
    EN 61526:2013 RADIATION PROTECTION INSTRUMENTATION - MEASUREMENT OF PERSONAL DOSE EQUIVALENTS H[P](10) AND H[P](0,07) FOR X, GAMMA, NEUTRON AND BETA RADIATIONS - DIRECT READING PERSONAL DOSE EQUIVALENT METERS (IEC 61526:2010, MODIFIED)
    EN ISO 6817 : 1995 MEASUREMENT OF CONDUCTIVE LIQUID FLOW IN CLOSED CONDUITS - METHODS USING ELECTROMAGNETIC FLOWMETERS