EN 50160 : 2010 AMD 1 2015
|
VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS |
IEC 60384-14:2013+AMD1:2016 CSV
|
Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains |
IEC 60068-1:2013
|
Environmental testing - Part 1: General and guidance |
IEC 60068-2-27:2008
|
Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
IEC 60068-2-20:2008
|
Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
EN 60085:2008
|
Electrical insulation - Thermal evaluation and designation |
EN 60068-2-20:2008
|
Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
EN 60068-2-1:2007
|
Environmental testing - Part 2-1: Tests - Test A: Cold |
IECQ 001002-3:2005
|
IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ) - RULES OF PROCEDURE - PART 3: APPROVAL PROCEDURES |
EN 60068-2-2:2007
|
Environmental testing - Part 2-2: Tests - Test B: Dry heat |
IEC 60068-2-21:2006
|
Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices |
IEC 60068-2-13:1983
|
Basic environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure |
EN 60068-1:2014
|
Environmental testing - Part 1: General and guidance |
IEC 60085:2007
|
Electrical insulation - Thermal evaluation and designation |
IEC 60410:1973
|
Sampling plans and procedures for inspection by attributes |
EN 60068-2-27:2009
|
Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
EN 60068-2-17:1994
|
Environmental testing - Part 2: Tests - Test Q: Sealing |
IEC 60068-2-17:1994
|
Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing |
EN 60068-2-21:2006
|
Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices |
IEC 60068-2-2:2007
|
Environmental testing - Part 2-2: Tests - Test B: Dry heat |
IEC 60062:2016
|
Marking codes for resistors and capacitors |
EN 60062:2016/AC:2016-12
|
MARKING CODES FOR RESISTORS AND CAPACITORS (IEC 60062:2016/COR1:2016) |
EN 60068-2-29:1993
|
Environmental testing - Part 2: Tests - Test Eb and guidance: Bump |
EN 60068-2-78:2013
|
Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state |
EN 60068-2-13:1999
|
Environmental testing - Part 2: Tests - Test M: Low air pressure |
EN 60068-2-6:2008
|
Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
CISPR 17:2011
|
Methods of measurement of the suppression characteristics of passive EMC filtering devices |
IEC 60068-2-29:1987
|
Environmental testing. Part 2: Tests. Test Eb and guidance: Bump |
IEC 60068-2-1:2007
|
Environmental testing - Part 2-1: Tests - Test A: Cold |
EN 55017 : 2011
|
METHODS OF MEASUREMENT OF THE SUPPRESSION CHARACTERISTICS OF PASSIVE EMC FILTERING DEVICES (CISPR 17:2011) |
EN 60068-2-30:2005
|
Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
EN 60695-11-5:2017
|
Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
IEC 60695-11-5 : 2.0
|
FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE |
IEC 60068-2-14:2009
|
Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
EN 60068-2-45:1992/A1:1993
|
Environmental testing - Part 2: Tests - Test Xa and guidance: Immersion in cleaning solvents |
EN 60068-2-14:2009
|
Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
IEC 60990:2016
|
Methods of measurement of touch current and protective conductor current |
IEC 60068-2-30:2005
|
Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |