• There are no items in your cart

CEN/TR 13233 : 2007 COR 2007

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

ADVANCED TECHNICAL CERAMICS - NOTATIONS AND SYMBOLS

Superseded date

28-07-2021

Published date

12-01-2013

Foreword
1 Scope
2 Normative references
3 Symbols, units and notations
  3.1 General symbols
  3.2 Symbols and notations specific to ceramic
      matrix composites
  3.3 Symbols, definitions and units
Bibliography

Specifies the symbols to be used to represent physical, mechanical and thermal characteristics, as determined by methods described in relevant CEN publications, for advanced technical ceramics, including ceramic matrix composites.

Committee
TC 184
DevelopmentNote
Supersedes ENV 13233. (05/2007)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy
Supersedes

BS ISO 17161 : 2014 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - CERAMIC COMPOSITES - DETERMINATION OF THE DEGREE OF MISALIGNMENT IN UNIAXIAL MECHANICAL TESTS
13/30255569 DC : 0 BS ISO 17140 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT ROOM TEMPERATURE - DETERMINATION OF FATIGUE PROPERTIES AT CONSTANT AMPLITUDE
UNI CEN/TS 15880 : 2009 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - DETERMINATION OF THE FIBRE/MATRIX INTERFACIAL FRICTIONAL SHEAR STRESS AT ROOM TEMPERATURE BY A SINGLE FIBRE PUSH-OUT METHOD
S.R. CEN/TS 15658:2007 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC FIBRES AT HIGH TEMPERATURE UNDER NON-REACTIVE ENVIRONMENT - DETERMINATION OF CREEP BEHAVIOUR BY THE HOT END METHOD
DIN EN 1007-5:2010-06 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 5: Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature
EN 1007-5:2010 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 5: Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature
DIN EN 14186:2008-02 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of elastic properties by an ultrasonic technique
EN ISO 17161:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Ceramic composites - Determination of the degree of misalignment in uniaxial mechanical tests (ISO 17161:2014)
CEN/TS 15880:2009 Advanced technical ceramics - Ceramic composites - Determination of the fibre/matrix interfacial frictional shear stress at room temperature by a single fibre push-out method
EN 1007-7:2010 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature
CEN/TS 15866:2009 Advanced technical ceramics - Ceramic composites - Determination of the thermal diffusivity of ceramic fibres
CEN/TS 15658:2007 Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature under non-reactive environment - Determination of creep behaviour by the hot end method
BS EN 1007-7:2010 Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature
BS EN 15365 : 2009 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC FIBRES AT HIGH TEMPERATURE IN A NON-REACTIVE ENVIRONMENT - DETERMINATION OF CREEP BEHAVIOUR BY THE COLD END METHOD
BS ISO 17142 : 2014 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE IN AIR AT ATMOSPHERIC PRESSURE - DETERMINATION OF FATIGUE PROPERTIES AT CONSTANT AMPLITUDE
ISO 17138:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at room temperature — Determination of flexural strength
BS ISO 17138:2014 Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at room temperature. Determination of flexural strength
I.S. EN ISO 17140:2016 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT ROOM TEMPERATURE - DETERMINATION OF FATIGUE PROPERTIES AT CONSTANT AMPLITUDE (ISO 17140:2014)
BS ISO 18610:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure. Determination of elastic properties by ultrasonic technique
BS EN ISO 17142:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of fatigue properties at constant amplitude
BS EN ISO 17140:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at room temperature. Determination of fatigue properties at constant amplitude
DIN EN ISO 17161:2016-10 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - CERAMIC COMPOSITES - DETERMINATION OF THE DEGREE OF MISALIGNMENT IN UNIAXIAL MECHANICAL TESTS (ISO 17161:2014)
XP CEN/TS 15658 : 2007 XP ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC FIBRES AT HIGH TEMPERATURE UNDER NON-REACTIVE ENVIRONMENT - DETERMINATION OF CREEP BEHAVIOUR - HOT END METHOD
I.S. EN 1007-7:2010 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 7: DETERMINATION OF THE DISTRIBUTION OF TENSILE STRENGTH AND OF TENSILE STRAIN TO FAILURE OF FILAMENTS WITHIN A MULTIFILAMENT TOW AT HIGH TEMPERATURE
UNI CEN/TS 15881 : 2009 Advanced technical ceramics - Ceramic composites - Determination of the fibre/ matrix interfacial frictional shear stress at room temperature by tensile tests on mini-composites
ISO 17142:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure Determination of fatigue properties at constant amplitude
I.S. EN 1007-5:2010 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 5: DETERMINATION OF DISTRIBUTION OF TENSILE STRENGTH AND OF TENSILE STRAIN TO FAILURE OF FILAMENTS WITHIN A MULTIFILAMENT TOW AT AMBIENT TEMPERATURE
NF EN 1007-5 : 2010 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 5: DETERMINATION OF DISTRIBUTION OF TENSILE STRENGTH AND OF TENSILE STRAIN TO FAILURE OF FILAMENTS WITHIN A MULTIFILAMENT TOW AT AMBIENT TEMPERATURE
UNI CEN/TS 15867 : 2009 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - GUIDE TO THE DETERMINATION OF THE DEGREE OF MISALIGNMENT IN UNIAXIAL MECHANICAL TESTS
UNI EN 14232 : 2009 ADVANCED TECHNICAL CERAMICS - TERMS, DEFINITIONS AND ABBREVIATIONS
BS EN ISO 17161:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Ceramic composites. Determination of the degree of misalignment in uniaxial mechanical tests
I.S. EN 15365:2010 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC FIBRES AT HIGH TEMPERATURE IN A NON-REACTIVE ENVIRONMENT - DETERMINATION OF CREEP BEHAVIOUR BY THE COLD END METHOD
08/30183873 DC : DRAFT AUG 2008 BS EN 1007-5 - ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 5: DETERMINATION OF DISTRIBUTION OF TENSILE STRENGTH AND OF TENSILE STRAIN TO FAILURE OF FILAMENTS WITHIN A MULTIFILAMENT TOW AT AMBIENT TEMPERATURE
DIN EN 1007-7:2010-12 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature
13/30255563 DC : 0 BS ISO 17138 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT ROOM TEMPERATURE - DETERMINATION OF FLEXURAL STRENGTH
XP CEN/TS 15881 : 2010 XP ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - DETERMINATION OF THE FIBRE/MATRIX INTERFACIAL FRICTIONAL SHEAR STRESS AT ROOM TEMPERATURE BY TENSILE TESTS ON MINI-COMPOSITES
BS ISO 17140 : 2014 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT ROOM TEMPERATURE - DETERMINATION OF FATIGUE PROPERTIES AT CONSTANT AMPLITUDE
13/30255572 DC : 0 BS ISO 17142 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE IN AIR AT ATMOSPHERIC PRESSURE - DETERMINATION OF FATIGUE PROPERTIES AT CONSTANT AMPLITUDE
09/30185903 DC : 0 BS EN 14232 - ADVANCED TECHNICAL CERAMICS - TERMS, DEFINITIONS AND ABBREVIATIONS
PREN 14232 : DRAFT 2009 ADVANCED TECHNICAL CERAMICS - TERMS, DEFINITIONS AND ABBREVIATIONS
09/30210744 DC : 0 BS EN 15365 - ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC FIBRES AT HIGH TEMPERATURE IN A NON-REACTIVE ENVIRONMENT - DETERMINATION OF CREEP BEHAVIOUR BY THE COLD END METHOD
XP CEN/TS 15880 : 2010 XP ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - DETERMINATION OF THE FIBRE/MATRIX INTERFACIAL FRICTIONAL SHEAR STRESS AT ROOM TEMPERATURE BY THE SINGLE FIBRE PUSH-OUT METHOD
ISO/IEC 23008-2:2017 Information technology High efficiency coding and media delivery in heterogeneous environments Part 2: High efficiency video coding
NF EN 1007-7 : 2010 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 7: DETERMINATION OF THE DISTRIBUTION OF TENSILE STRENGTH AND OF TENSILE STRAIN TO FAILURE OF FILAMENTS WITHIN A MULTIFILAMENT TOW AT HIGH TEMPERATURE
UNI EN 14186 : 2008 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT ROOM TEMPERATURE - DETERMINATION OF ELASTIC PROPERTIES BY AN ULTRASONIC TECHNIQUE
UNI EN 1007-5 : 2010 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 5: DETERMINATION OF DISTRIBUTION OF TENSILE STRENGTH AND OF TENSILE STRAIN TO FAILURE OF FILAMENTS WITHIN A MULTIFILAMENT TOW AT AMBIENT TEMPERATURE
DD CEN/TS 15867:2009 Advanced technical ceramics. Ceramic composites. Guide to the determination of the degree of misalignment in uniaxial mechanical tests
S.R. CEN/TS 15881:2009 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - DETERMINATION OF THE FIBRE/MATRIX INTERFACIAL FRICTIONAL SHEAR STRESS AT ROOM TEMPERATURE BY TENSILE TESTS ON MINI-COMPOSITES
09/30210248 DC : 0 BS EN 1007-7 - ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 7: DETERMINATION OF THE DISTRIBUTION OF TENSILE STRENGTH AND OF TENSILE STRAIN TO FAILURE OF FILAMENTS WITHIN A MULTIFILAMENT TOW AT HIGH TEMPERATURE
UNI EN 1007-7 : 2010 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 7: DETERMINATION OF THE DISTRIBUTION OF TENSILE STRENGTH AND OF TENSILE STRAIN TO FAILURE OF FILAMENTS WITHIN A MULTIFILAMENT TOW AT HIGH TEMPERATURE
13/30255575 DC : 0 BS ISO 17161 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - CERAMIC COMPOSITES - GUIDE TO THE DETERMINATION OF THE DEGREE OF MISALIGNMENT IN UNIAXIAL MECHANICAL TESTS
DIN EN ISO 17161 E : 2016 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - CERAMIC COMPOSITES - DETERMINATION OF THE DEGREE OF MISALIGNMENT IN UNIAXIAL MECHANICAL TESTS (ISO 17161:2014)
DD CEN/TS 15866:2009 Advanced technical ceramics. Ceramic composites. Determination of the thermal diffusivity of ceramic fibres
S.R. CEN/TS 15866:2009 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - DETERMINATION OF THE THERMAL DIFFUSIVITY OF CERAMIC FIBRES
I.S. EN ISO 17142:2016 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE IN AIR AT ATMOSPHERIC PRESSURE - DETERMINATION OF FATIGUE PROPERTIES AT CONSTANT AMPLITUDE (ISO 17142:2014)
BS EN 14186:2007 Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of elastic properties by an ultrasonic technique
ISO 17140:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) Mechanical properties of ceramic composites at room temperature Determination of fatigue properties at constant amplitude
BS EN 1007-5:2010 Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature
ISO 17161:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) — Ceramic composites — Determination of the degree of misalignment in uniaxial mechanical tests
EN ISO 17140:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of fatigue properties at constant amplitude (ISO 17140:2014)
EN ISO 17142:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude (ISO 17142:2014)
EN 14186:2007 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of elastic properties by an ultrasonic technique
EN 14232:2009 Advanced technical ceramics - Terms, definitions and abbreviations
DIN EN 15365:2010-12 Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature in a non-reactive environment - Determination of creep behaviour by the cold end method
DD CEN/TS 15658:2007 Advanced technical ceramics. Mechanical properties of ceramic fibres at high temperature under non-reactive environment. Determination of creep behaviour by the hot end method
DD CEN/TS 15881:2009 Advanced technical ceramics. Ceramic composites. Determination of the fibre/matrix interfacial frictional shear stress at room temperature by tensile tests on mini-composites
I.S. EN 14186:2007 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT ROOM TEMPERATURE - DETERMINATION OF ELASTIC PROPERTIES BY AN ULTRASONIC TECHNIQUE
S.R. CEN/TS 15880:2009 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - DETERMINATION OF THE FIBRE/MATRIX INTERFACIAL FRICTIONAL SHEAR STRESS AT ROOM TEMPERATURE BY A SINGLE FIBRE PUSH-OUT METHOD
BS EN 14232:2009 Advanced technical ceramics. Terms, definitions and abbreviations
DD CEN/TS 15880:2009 Advanced technical ceramics. Ceramic composites. Determination of the fibre/matrix interfacial frictional shear stress at room temperature by a single fibre pushout method
ISO 18610:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure Determination of elastic properties by ultrasonic technique
UNI EN 15365 : 2010 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC FIBRES AT HIGH TEMPERATURE IN A NON-REACTIVE ENVIRONMENT - DETERMINATION OF CREEP BEHAVIOUR BY THE COLD END METHOD
I.S. EN ISO 17161:2016 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - CERAMIC COMPOSITES - DETERMINATION OF THE DEGREE OF MISALIGNMENT IN UNIAXIAL MECHANICAL TESTS (ISO 17161:2014)
I.S. EN 14232:2009 ADVANCED TECHNICAL CERAMICS - TERMS, DEFINITIONS AND ABBREVIATIONS
S.R. CEN TS 15867:2009 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - GUIDE TO THE DETERMINATION OF THE DEGREE OF MISALIGNMENT IN UNIAXIAL MECHANICAL TESTS
NF EN 15365 : 2010 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC FIBRES AT HIGH TEMPERATURE IN A NON-REACTIVE ENVIRONMENT - DETERMINATION OF CREEP BEHAVIOUR BY THE COLD END METHOD
UNI CEN/TS 15866 : 2009 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - DETERMINATION OF THE THERMAL DIFFUSIVITY OF CERAMIC FIBRES
EN 15365:2010 Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature in a non-reactive environment - Determination of creep behaviour by the cold end method
CEN/TS 15881:2009 Advanced technical ceramics - Ceramic composites - Determination of the fibre/matrix interfacial frictional shear stress at room temperature by tensile tests on mini-composites
CEN/TS 15867:2009 Advanced technical ceramics - Ceramic composites - Guide to the determination of the degree of misalignment in uniaxial mechanical tests

EN 1389:2003 (edition 2) Advanced technical ceramics - Ceramic composites - Physical properties - Determination of density and apparent porosity
EN 12923-1:2006 Advanced technical ceramics - Monolithic ceramics - Part 1: General practice for undertaking corrosion tests
CEN/TS 1159-4:2004 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 4: Determination of thermal conductivity
EN 1007-1:2002 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 1: Determination of size content
EN 1007-2:2002 Advanced technical ceramics - Ceramics composites - Methods of test for reinforcement - Part 2: Determination of linear density
EN 843-2:2006 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 2: Determination of Young's modulus, shear modulus and Poisson's ratio
EN 12290:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of compression properties
ISO 80000-4:2006 Quantities and units Part 4: Mechanics
EN 1007-3:2002 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 3: Determination of filament diameter and cross-section area
EN 843-1:2006 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength
EN 725-5:2007/AC:2007 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC POWDERS - PART 5: DETERMINATION OF PARTICLE SIZE DISTRIBUTION
EN 821-3 : 2005 ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - THERMO-PHYSICAL PROPERTIES - PART 3: DETERMINATION OF SPECIFIC HEAT CAPACITY
EN 820-1:2002 Advanced technical ceramics - Methods of testing monolithic ceramics - Thermonechanical properties - Part 1: Determination of flexural strength at elevated temperatures
EN 12789:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength
CEN/TS 1071-10 : 2004 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 10: DETERMINATION OF COATING THICKNESS BY CROSS SECTIONING
EN 12788:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength
EN 623-4:2004 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 4: Determination of surface roughness
EN 13234:2006 Advanced technical ceramics - Mechanical properties of ceramic composites at ambient temperature - Evaluation of the resistance to crack propagation by notch sensitivity testing
EN 821-1 : 1995 ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - THERMO-PHYSICAL PROPERTIES - DETERMINATION OF THERMAL EXPANSION
EN ISO 18756 : 2005 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF FRACTURE TOUGHNESS OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE BY THE SURFACE CRACK IN FLEXURE (SCF) METHOD
ISO 18753:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of absolute density of ceramic powders by pycnometer
EN 1159-1:2003 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1: Determination of thermal expansion
EN 843-5:2006 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 5: Statistical analysis
EN 658-1:1998 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 1: Determination of tensile properties
ENV 1006 : DRAFT 2003 ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GUIDANCE ON THE SELECTION OF TEST PIECES FOR THE EVALUATION OF PROPERTIES
CEN/TS 1071-11 : 2005 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 11: DETERMINATION OF INTERNAL STRESS BY THE STONEY FORMULA
EN 843-3:2005 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 3: Determination of subcritical crack growth parameters from constant stressing rate flexural strength tests
CEN/TS 820-5 : 2004 ADVANCED TECHNICAL CERAMICS - METHODS OF TESTING MONOLITHIC CERAMICS - THERMOMECHANICAL PROPERTIES - PART 5: DETERMINATION OF ELASTIC MODULI AT ELEVATED TEMPERATURES
EN 623-1:2006 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 1: Determination of the presence of defects by dye penetration
EN 820-2:2003 Advanced technical ceramics - Methods of testing monolithic ceramics - Thermo-mechanical properties - Part 2: Determination of self-loaded deformation
EN 12289:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at ambient temperature - Determination of in-plane shear properties
CEN/TS 1071-8 : 2004 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 8: ROCKWELL INDENTATION TEST FOR EVALUATION OF ADHESION
ENV 1071-6 : DRAFT 2002 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - DETERMINATION OF THE ABRASION RESISTANCE OF COATINGS BY A MICRO-ABRASION WEAR TEST
EN 1159-3:2003/AC:2008 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES, THERMOPHYSICAL PROPERTIES - PART 3: DETERMINATION OF SPECIFIC HEAT CAPACITY
EN 725-11:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 11: Determination of densification on natural sintering
EN 1892:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of tensile properties
EN 725-1:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 1: Determination of impurities in alumina
ISO 80000-3:2006 Quantities and units Part 3: Space and time
EN 725-8:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 8: Determination of tapped bulk density
EN ISO 15732 : 2005 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR FRACTURE TOUGHNESS OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE BY SINGLE EDGE PRECRACKED BEAM (SEPB) METHOD (ISO 15732:2003)
EN 725-9:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 9: Determination of un-tapped bulk density
EN 1071-1 : 2003 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 1: DETERMINATION OF COATING THICKNESS BY CONTACT PROBE FILOMETER
EN 623-2:1993 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 2: Determination of density and porosity
EN 658-2 : 2002 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT ROOM TEMPERATURE - PART 2: DETERMINATION OF COMPRESSION PROPERTIES
EN 821-2:1997 Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 2: Determination of thermal diffusivity by the laser flash (or heat pulse) method
EN 1071-4:2006 Advanced technical ceramics - Methods of test for ceramic coatings - Part 4: Determination of chemical composition by electron probe microanalysis (EPMA)
EN 1893:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of tensile properties
EN 658-5:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)
CEN/TS 14425-1 : 2003 ADVANCED TECHNICAL CERAMICS - TEST METHODS FOR DETERMINATION OF FRACTURE TOUGHNESS OF MONOLITHIC CERAMICS - PART 1: GUIDE TO TEST METHOD SELECTION
ISO 18756:2003 Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method
CEN/TS 14425-5 : 2004 ADVANCED TECHNICAL CERAMICS - TEST METHODS FOR DETERMINATION OF FRACTURE TOUGHNESS OF MONOLITIC CERAMICS - PART 5: SINGLE-EDGE VEE-NOTCH BEAM (SEVNB) METHOD
EN 843-4 : 2005 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 4: VICKERS, KNOOP AND ROCKWELL SUPERFICIAL HARDNESS
EN 623-3 : 2001 ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GENERAL AND TEXTURAL PROPERTIES - DETERMINATION OF GRAIN SIZE AND SIZE DISTRIBUTION (CHARACTERIZED BY THE LINEAR INTERCEPT METHOD)
EN ISO 18757:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method (ISO 18757:2003)
ENV 14226:2002 Advanced technical ceramics - Test methods for ceramic powders - Determination of calcium, magnesium, iron and aluminium in silicon nitride by using flame atomic absorption spectroscopy (FAAS) or inductively coupled plasma atomic emission spectroscopy (ICP-AES)
EN 1159-2:2003 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 2: Determination of thermal diffusivity
ENV 1007-6 : DRAFT 2002 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - DETERMINATION OF TENSILE PROPERTIES OF FILAMENT AT HIGH TEMPERATURE
ENV 658-6 : DRAFT 1993 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT ROOM TEMPERATURE - DETERMINATION OF SHEAR STRENGTH BY DOUBLE PUNCH SHEARING
ISO 18757:2003 Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of specific surface area of ceramic powders by gas adsorption using the BET method
ENV 14312 : DRAFT 2002 ADVANCED TECHNICAL CERAMICS - CERAMIC POWDERS - DETERMINATION OF FLOWABILITY BEHAVIOUR OF CERAMIC GRANULES
ENV 14186 : DRAFT 2002 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - MECHANICAL PROPERTIES AT ROOM TEMPERATURE, DETERMINATION OF ELASTIC PROPERTIES BY AN ULTRASONIC TECHNIQUE
CEN/TS 1071-7 : 2003 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 7: DETERMINATION OF HARDNESS AND YOUNG'S MODULUS BY INSTRUMENTED INDENTATION TESTING
EN 725-7 : 1995 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC POWDERS - PART 7: DETERMINATION OF THE ABSOLUTE DENSITY
ENV 14232 : DRAFT 2003 ADVANCED TECHNICAL CERAMICS - TERMS, DEFINITIONS AND ABBREVIATIONS
EN 725-10:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 10: Determination of compaction properties
EN 820-3 : 2004 ADVANCED TECHNICAL CERAMICS - METHODS OF TESTING MONOLITHIC CERAMICS - THERMOMECHANICAL PROPERTIES - PART 3: DETERMINATION OF RESISTANCE TO THERMAL SHOCK BY WATER QUENCHING
EN 725-12:2001 Advanced technical ceramics - Methods of test for ceramic powders - Part 12: Chemical analysis of zirconia
EN 725-6 : 1996 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC POWDERS - PART 6: DETERMINATION OF THE SPECIFIC SURFACE AREA
EN 1007-4:2004 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENT - PART 4: DETERMINATION OF TENSILE PROPERTIES OF FILAMENTS AT AMBIENT TEMPERATURE
CEN/TS 843-6 : 2004 ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - MECHANICAL PROPERTIES AT ROOM TEMPERATURE - PART 6: GUIDANCE FOR FRACTOGRAPHIC INVESTIGATION
EN 1007-5:2010 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 5: Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature
EN 1071-2 : 2002 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 2: DETERMINATION OF COATING THICKNESS BY THE CRATER GRINDING METHOD
ENV 12212 : DRAFT 1995 ADVANCED TECHNICAL CERAMICS - UNIFIED METHOD FOR CLASSIFICATION
ENV 1071-5 : DRAFT 1995 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 5: DETERMINATION OF POROSITY
EN 1071-3 : 2005 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 3: DETERMINATION OF ADHESION AND OTHER MECHANICAL FAILURE MODES BY A SCRATCH TEST
EN ISO 18753:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pycnometer (ISO 18753:2017)
EN 1894:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of shear strength by compression loading of notched specimens
EN 725-3:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 3: Determination of the oxygen content of non-oxides by thermal extraction with a carrier gas
EN 12291:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of compression properties
ENV 12923-2 : DRAFT 2001 ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - PART 2: OXIDATION TEST
ENV 725-2 : 1994 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC POWDERS - DETERMINATION OF IMPURITIES IN BARIUM TITANATE
EN 658-4:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 4: Determination of interlaminar shear strength by compression loading of notched test specimens
ISO 15732:2003 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method
EN 725-4:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 4: Determination of oxygen content in aluminium nitride by XRF analysis
ENV 623-5 : DRAFT 2002 ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GENERAL AND TEXTURAL PROPERTIES - PART 5: DETERMINATION OF PHASE VOLUME FRACTION BY EVALUATION OF MICROGRAPHS
ENV 14273:2002 Advanced technical ceramics - Ceramic powders - Determination of crystalline phases in zirconia
ENV 820-4 : DRAFT 2001 ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - THERMOMECHANICAL PROPERTIES - PART 4: DETERMINATION OF FLEXURAL CREEP DEFORMATION AT ELEVATED TEMPERATURES
EN 658-3:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 3: Determination of flexural strength
EN 13235:2006 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of creep behaviour
CEN/TS 1071-9 : 2004 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 9: DETERMINATION OF FRACTURE STRAIN
CEN/TS 14425-3 : 2003 ADVANCED TECHNICAL CERAMICS - TEST METHODS FOR DETERMINATION OF FRACTURE TOUGHNESS OF MONOLITHIC CERAMICS - PART 3: CHEVRON NOTCHED BEAM (CNB) METHOD

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.