CEN/TS 15480-2:2012
Current
The latest, up-to-date edition.
Identification card systems - European Citizen Card - Part 2: Logical data structures and security services
13-06-2012
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviations
5 Data elements and data structures
6 Basic card services
7 Extended card services
Annex A (normative) - Command set
Annex B (normative) - Cryptographic Information
Application
Annex C (normative) - Mandatory features
Annex D (informative) - Optional features
Annex E (informative) - Application Profiles
Annex F (informative) - Access rules in expanded
format
Annex G (informative) - Example of data structure: the
Security Data Objects concept
Bibliography
This Technical Specification specifies the logical characteristics and security features at the card/system interface for the European Citizen Card.The European Citizen Card is a smart card with Identification, Authentication and electronic Signature (IAS) services. Therefore:-the supported services are specified;-the supported data structures as well as the access to these structures are specified;-the command set is defined.This Technical Specification aims to ensure the interoperability at card/system interface in the usage phase.In order to reach the interoperability objective, IAS services are compliant with EN 14890 Part 1 and Part 2. As the EN documents offer options, this specification fully defines a complete profile. This Technical Specification also considers ICAO Doc 9303.This Technical Specification does not mandate the use of a particular technology, and is intended to allow both native and Java card technologies.This specification encompasses mandatory and optional features. Optional features make up a toolbox of modular options from which issuers can pick up the necessary protocols to fulfil the requirements for use. Mandatory features shall be implemented for a smart card to be compliant with this Technical Specification. Mandatory features required for compliancy to ECC specification are given in Annex C, the optional features are given in Annex D. Two IAS-enabled smart cards issued by two different issuers, and compliant with this Technical Specification but implementing different application profiles out of this Technical Specification, can interoperate with a terminal provided that such a terminal supports both application profiles. Therefore, interoperability requires a specific agreement between issuers/governments in order to determine which cross-border services are to be shared, and consequently, which protocols are to be supported by the terminals in each country.All the APDU commands described in this Technical Specification are in accordance with ISO/IEC 7816 Part 4 or Part 8. They are fully described here in order to provide the settings adopted by this specification and to prevent any ambiguity in case of several possible interpretations of the standards.For physical, electrical and transport protocol characteristics, refer to CEN/TS 15480-1.
| Committee |
CEN/TC 224
|
| DocumentType |
Technical Specification
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| UNI CEN/TS 15480-2 : 2012 | Identical |
| PKN CEN/TS 15480-2 : 2007 | Identical |
| DIN CEN/TS 15480-2;DIN SPEC 91130-2:2012-09 | Identical |
| NEN NPR CEN/TS 15480-2 : 2012 | Identical |
| PD CEN/TS 15480-2:2012 | Identical |
| DIN CEN/TS 15480-2 : 2012 | Identical |
| S.R. CEN/TS 15480-2:2012 | Identical |
| PD CEN/TS 15480-4:2012 | Identification card systems. European Citizen Card Recommendations for European Citizen Card issuance, operation and use |
| I.S. EN 419212-3:2017 | APPLICATION INTERFACE FOR SECURE ELEMENTS FOR ELECTRONIC IDENTIFICATION, AUTHENTICATION AND TRUSTED SERVICES - PART 3: DEVICE AUTHENTICATION PROTOCOLS |
| S.R. CEN/TS 15480-5:2013 | IDENTIFICATION CARD SYSTEMS - EUROPEAN CITIZEN CARD - PART 5: GENERAL INTRODUCTION |
| CEN/TS 15480-4:2012 | Identification card systems - European Citizen Card - Part 4: Recommendations for European Citizen Card issuance, operation and use |
| PREN 419212-3 : DRAFT 2016 | APPLICATION INTERFACE FOR SECURE ELEMENTS FOR ELECTRONIC IDENTIFICATION, AUTHENTICATION AND TRUSTED SERVICES - PART 3: DEVICE AUTHENTICATION PROTOCOLS |
| S.R. CEN/TR 419200:2017 | GUIDANCE FOR SIGNATURE CREATION AND OTHER RELATED DEVICES |
| UNI CEN/TS 15480-4 : 2012 | IDENTIFICATION CARD SYSTEMS - EUROPEAN CITIZEN CARD - PART 4: RECOMMENDATIONS FOR EUROPEAN CITIZEN CARD ISSUANCE, OPERATION AND USE |
| CEN/TR 419200:2017 | Guidance for signature creation and other related devices |
| S.R. CEN/TR 419010:2017 | FRAMEWORK FOR STANDARDIZATION OF SIGNATURES - EXTENDED STRUCTURE INCLUDING ELECTRONIC IDENTIFICATION AND AUTHENTICATION |
| UNI CEN/TS 15480-5 : 2013 | IDENTIFICATION CARD SYSTEMS - EUROPEAN CITIZEN CARD - PART 5: GENERAL INTRODUCTION |
| PD CEN/TS 15480-3:2014 | Identification card systems. European Citizen Card European Citizen Card Interoperability using an application interface |
| BS EN 419212-3:2017 | Application Interface for Secure Elements for Electronic Identification, Authentication and Trusted Services Device authentication protocols |
| 12/30255293 DC : 0 | BS EN 14890-1 - APPLICATION INTERFACE FOR SMART CARDS USED AS SECURE SIGNATURE CREATION DEVICES - PART 1: BASIC SERVICES |
| PD CEN/TR 419010:2017 | Framework for standardization of signatures. Extended structure including electronic identification and authentication |
| CEN/TR 419010:2017 | Framework for standardization of signatures - Extended structure including electronic identification and authentication |
| UNI EN 419212-1 : 2015 | APPLICATION INTERFACE FOR SMART CARDS USED AS SECURE SIGNATURE CREATION DEVICES - PART 1: BASIC SERVICES |
| PD CEN/TR 419200:2017 | Guidance for signature creation and other related devices |
| 16/30348455 DC : 0 | BS EN 419212-3 - APPLICATION INTERFACE FOR SECURE ELEMENTS FOR ELECTRONIC IDENTIFICATION, AUTHENTICATION AND TRUSTED SERVICES - PART 3: DEVICE AUTHENTICATION PROTOCOLS |
| PD CEN/TS 15480-5:2013 | Identification card systems. European Citizen Card General Introduction |
| S.R. CEN/TS 15480-4:2012 | IDENTIFICATION CARD SYSTEMS - EUROPEAN CITIZEN CARD - PART 4: RECOMMENDATIONS FOR EUROPEAN CITIZEN CARD ISSUANCE, OPERATION AND USE |
| S.R. CEN/TS 15480-3:2014 | IDENTIFICATION CARD SYSTEMS - EUROPEAN CITIZEN CARD - PART 3: EUROPEAN CITIZEN CARD INTEROPERABILITY USING AN APPLICATION INTERFACE |
| S.R. CWA 15974:May 2009 | INTEROPERABILITY OF THE ELECTRONIC EUROPEAN HEALTH INSURANCE CARDS (WS/EEHIC) |
| EN 419212-3:2017 | Application Interface for Secure Elements for Electronic Identification, Authentication and Trusted Services - Part 3: Device authentication protocols |
| UNI CEN/TS 15480-3 : 2014 | IDENTIFICATION CARD SYSTEMS - EUROPEAN CITIZEN CARD - PART 3: EUROPEAN CITIZEN CARD INTEROPERABILITY USING AN APPLICATION INTERFACE |
| CEN/TS 15480-3:2014 | Identification card systems - European Citizen Card - Part 3: European Citizen Card Interoperability using an application interface |
| CEN/TS 15480-5:2013 | Identification card systems - European Citizen Card - Part 5: General Introduction |
| ICAO 9303P3-2 : 2008 | MACHINE READABLE TRAVEL DOCUMENTS - PART 3: MACHINE READABLE OFFICIAL TRAVEL DOCUMENTS - MACHINE READABLE OFFICIAL TRAVEL DOCUMENTS - VOLUME 2: SPECIFICATIONS FOR ELECTRONICALLY ENABLED MRTDS WITH BIOMETRIC IDENTIFICATION CAPABILITY |
| ISO/IEC 7816-6:2016 | Identification cards — Integrated circuit cards — Part 6: Interindustry data elements for interchange |
| ISO/IEC 19794-2:2011 | Information technology — Biometric data interchange formats — Part 2: Finger minutiae data |
| ISO/IEC 9798-3:1998 | Information technology Security techniques Entity authentication Part 3: Mechanisms using digital signature techniques |
| ISO/IEC 7816-8:2016 | Identification cards Integrated circuit cards Part 8: Commands and mechanisms for security operations |
| ISO/IEC 14443-4:2016 | Identification cards Contactless integrated circuit cards Proximity cards Part 4: Transmission protocol |
| ISO/IEC 7816-4:2013 | Identification cards Integrated circuit cards Part 4: Organization, security and commands for interchange |
| ICAO 9303P1-1 : 2006 | MACHINE READABLE TRAVEL DOCUMENTS - PART 1: INTRODUCTION |
| ISO/IEC 7816-3:2006 | Identification cards — Integrated circuit cards — Part 3: Cards with contacts — Electrical interface and transmission protocols |
| ISO/IEC 9796-2:2010 | Information technology Security techniques Digital signature schemes giving message recovery Part 2: Integer factorization based mechanisms |
| ISO/IEC 10118-3:2004 | Information technology Security techniques Hash-functions Part 3: Dedicated hash-functions |
| ISO/IEC 7812-1:2017 | Identification cards — Identification of issuers — Part 1: Numbering system |
| ISO 3166-1:2013 | Codes for the representation of names of countries and their subdivisions Part 1: Country codes |
| ANSI X9.63 : 2011 | FINANCIAL SERVICES - PUBLIC KEY CRYPTOGRAPHY FOR THE FINANCIAL SERVICES INDUSTRY, KEY AGREEMENT AND KEY TRANSPORT USING ELLIPTIC CURVE CRYPTOGRAPHY |
| ISO/IEC 7816-15:2016 | Identification cards Integrated circuit cards Part 15: Cryptographic information application |
| EN 14890-2:2008 | Application Interface for smart cards used as Secure Signature Creation Devices - Part 2: Additional Services |
| EN 14890-1:2008 | Application Interface for smart cards used as Secure Signature Creation Devices - Part 1: Basic services |
| ISO/IEC 7816-11:2004 | Identification cards Integrated circuit cards Part 11: Personal verification through biometric methods |
| ISO/IEC 11770-3:2015 | Information technology Security techniques Key management Part 3: Mechanisms using asymmetric techniques |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.