This Technical Specification describes the “Open Standard Interface between Image Processor, Machine Control and Image Controller” (IP/MC/IC Interface) in the context of postal automation equipment. The following architectural overview is the basis for this interface standardization:It was agreed to unify the interfaces betweena) Image Processor and Image Controller,b) Image Processor and Machine Control andc) Machine Control and Image Controllerand to produce one common specification for this so-called IP/MC/IC Interface.The communication partners of this interface will be called Machine or Machine Control (MC) on the one side and Reading/Coding (RC) System on the other side.There may be several instances of this interface, depending on the implementation of the MC and the connected RC.NOTEinterfaces for synchronizing the lifted images with their mailpiece_IDs provided by the machine are not shown in the figure above and are not subject of standardization within the first release of this interface. From the customer point of view the following two scenarios are relevant. The systems MACHINE and RC SYSTEM are to be considered as "black boxes" thus not detailing internal system structure and interfaces.1) The Machine already includes Camera and Image Processor and will be connected to a 3rd-party RC System including Image Controller and Enrichment Devices.2) The Machine will be connected to a 3rd-party RC System including Camera, Image Processor, Image Controller and Enrichment Devices. The Camera and (possibly) the Image Processor will have to be mechanically integrated into the machine. NOTEThe camera can be provided by any 3rd-party. This should not impede on the IP/MC/IC interfaces !This standard is arranged under 4 main clauses as described in Figure 4. - UCM (Use Case Model) describes the use cases for the IP/MC/IC Interface using sequence diagrams with messages.- IDD (Interface Design Description) defines the data model (...)