CGA C 6.1 : 2013 COR 2015

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

STANDARD FOR VISUAL INSPECTION OF HIGH PRESSURE ALUMINUM ALLOY COMPRESSED GAS CYLINDERS

Available format(s):

Superseded date: 01-10-2019

Language(s):

Published date: 12-01-2013

Publisher: Compressed Gas Association

Table of Contents - (Show below) - (Hide below)

1 Introduction
2 Scope
3 Definitions
4 Preparation for inspection and hydrostatic testing
  4.1 Inspection equipment
  4.2 Venting
  4.3 Aluminum cylinder identification
  4.4 Cleaning
5 Inspection criteria for aluminum high pressure
  cylinders
  5.1 Markings
  5.2 Corrosion limits
  5.3 Cuts, digs, and gouges
  5.4 Dents
  5.5 Leaks and holes
  5.6 Bulges
  5.7 Fire and thermal damage
  5.8 Neck defects
  5.9 Threads and valving
  5.10 Bow
6 Condemning a cylinder
7 References
Figures
Appendices
Appendix A - Eddy current devices (Informative)
Appendix B - Sustained load cracking (Informative)
Appendix C - Heat exposure and condemning aluminum
             cylinders (Informative)

Abstract - (Show below) - (Hide below)

Applicable for the visual inspection of aluminum alloy compressed gas cylinders with service pressures of 1800 psi (12410 kPa) or greater.

General Product Information - (Show below) - (Hide below)

Development Note	French Edition issued on 01-06-2016. (03/2018)
Document Type	Standard
ISBN
Pages
Published
Publisher	Compressed Gas Association
Status	Superseded
Superseded By	CGA C-6.1 : 2019

Standards Referenced By This Book - (Show below) - (Hide below)

CGA C 6.3 : 2013	STANDARD FOR VISUAL INSPECTION OF LOW PRESSURE ALUMINUM ALLOY COMPRESSED GAS CYLINDERS
MIL-STD-1330 Revision D:1996	STANDARD PRACTICE FOR PRECISION CLEANING AND TESTING OF SHIPBOARD OXYGEN, HELIUM, HELIUM-OXYGEN, NITROGEN AND HYDROGEN SYSTEMS
CGA C 10 : 2013	GUIDELINES TO PREPARE CYLINDERS AND TUBES FOR GAS SERVICE AND CHANGES IN GAS SERVICE
CSA Z275.1 : 2016	HYPERBARIC FACILITIES
CSA Z94.4 : 2011	SELECTION, USE, AND CARE OF RESPIRATORS
CSA Z94.4 : 2011(R2016)	SELECTION, USE, AND CARE OF RESPIRATORS
CGA C 6.2 : 2013	STANDARD FOR VISUAL INSPECTION AND REQUALIFICATION OF FIBER REINFORCED HIGH PRESSURE CYLINDERS
CSA Z94.4 : 2011 : INC : UPD 2 : 2016 : R201600	SELECTION, USE, AND CARE OF RESPIRATORS
CSA Z94.4 : 2011 : INC : UPD 1 : 2012	SELECTION, USE, AND CARE OF RESPIRATORS
CGA P2-5 : 2011	TRANSFILLING OF HIGH PRESSURE GASEOUS OXYGEN USED FOR RESPIRATION
CGA V 11 : 2011	GENERAL GUIDELINES FOR THE INSTALLATION OF VALVES INTO HIGH PRESSURE ALUMINUM ALLOY CYLINDERS
SAE J 2296 : 2012	RETEST OF REFRIGERANT CONTAINER
CGA SA 31 : 2017	SAFETY ALERT, RECEIVING CYLINDERS AFTER NATURAL DISASTER EXPOSURE
CGA C 1-1 : 2004	PERSONNEL TRAINING AND CERTIFICATION GUIDELINES FOR CYLINDER REQUALIFICATION BY THE VOLUMETRIC EXPANSION METHOD
SAE AIR 1059 : 2017	OXYGEN CYLINDER QUALITY, SERVICEABILITY, MAINTENANCE TRANSFILLING AND MARKING
CSA Z94.4 : 2011 : INC : UPD 1 : 2012 : FR	SELECTION, USE, AND CARE OF RESPIRATORS
ASTM F 2856 : 2012 : R2016	Standard Practice for Transfilling and Safe Handling of Small CO2 Cylinders for Use in Paintball
ASTM F 2773 :2013	Standard Practice for Transfilling Compressed Air or Nitrogen and Safe Handling of Small Paintball Cylinders
NFPA 52 : 2016	VEHICULAR NATURAL GAS FUEL SYSTEMS CODE
CSA Z275.2 : 2015	OCCUPATIONAL SAFETY CODE FOR DIVING OPERATIONS
CGA PS 29 : 2014	CGA POSITION STATEMENT ON MARKING OF DOT ALL-METAL, SEAMLESS COMPRESSED GAS CYLINDERS
CGA P 5 : 2013	SUGGESTIONS FOR THE CARE OF HIGH PRESSURE AIR CYLINDERS FOR UNDERWATER BREATHING
B339-14	Cylinders, spheres, and tubes for the transportation of dangerous goods
CGA C 1 : 2016	METHODS FOR PRESSURE TESTING COMPRESSED GAS CYLINDERS
B340-14	Selection and use of cylinders, spheres, tubes, and other containers for the transportation of dangerous goods, class 2
CSA Z94.4 : 2011 : R2016	SELECTION, USE, AND CARE OF RESPIRATORS
ASTM F 2773 : 2013 : R2017	Standard Practice for Transfilling Compressed Air or Nitrogen and Safe Handling of Small Paintball Cylinders
ASTM F 2856 : 2012	Standard Practice for Transfilling and Safe Handling of Small CO2 Cylinders for Use in Paintball
CGA SB 7 : 2003(R2009)	RUPTURE OF OXYGEN CYLINDERS IN THE OFFSHORE MARINE INDUSTRY
CGA TB 15 : 2009	REQUIREMENTS FOR THE POST MANUFACTURE TARE WEIGHT MARKING OF CYLINDERS
CGA C 20 : 2014	REQUALIFICATION STANDARD FOR METALLIC, DOT AND TC 3-SERIES GAS CYLINDERS AND TUBES USING ULTRASONIC EXAMINATION
CGA SB 22 : 2013	ALUMINUM CYLINDERS - GUIDELINES FOR A HEAT EXPOSURE INDICATING SYSTEMS
CGA C 6 : 2013	STANDARD FOR VISUAL INSPECTION OF STEEL COMPRESSED GAS CYLINDERS
CGA C 26 : 2017	GUIDELINE FOR THE POST MANUFACTURE TARE WEIGHT MARKING OF CYLINDERS
SAE J 2406 : 2018	RECOMMENDED PRACTICES FOR CNG POWERED MEDIUM AND HEAVY-DUTY TRUCKS
CGA P 22 : 2014	THE RESPONSIBLE MANAGEMENT AND DISPOSITION OF COMPRESSED GASES AND THEIR CYLINDERS
CSA Z180.1 : 2013	COMPRESSED BREATHING AIR AND SYSTEMS
CGA H 1 : 2011	SERVICE CONDITIONS FOR PORTABLE, REVERSIBLE METAL HYDRIDE SYSTEMS

Standards Referencing This Book - (Show below) - (Hide below)

CGA C 6.3 : 2013	STANDARD FOR VISUAL INSPECTION OF LOW PRESSURE ALUMINUM ALLOY COMPRESSED GAS CYLINDERS
CGA C 20 : 2014	REQUALIFICATION STANDARD FOR METALLIC, DOT AND TC 3-SERIES GAS CYLINDERS AND TUBES USING ULTRASONIC EXAMINATION
CGA SB 7 : 2003(R2009)	RUPTURE OF OXYGEN CYLINDERS IN THE OFFSHORE MARINE INDUSTRY
CGA C 6.2 : 2013	STANDARD FOR VISUAL INSPECTION AND REQUALIFICATION OF FIBER REINFORCED HIGH PRESSURE CYLINDERS
CGA SB 22 : 2013	ALUMINUM CYLINDERS - GUIDELINES FOR A HEAT EXPOSURE INDICATING SYSTEMS
CGA C 6 : 2013	STANDARD FOR VISUAL INSPECTION OF STEEL COMPRESSED GAS CYLINDERS
CGA C 1 : 2016	METHODS FOR PRESSURE TESTING COMPRESSED GAS CYLINDERS

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart