CGA S 1.3 : 2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PRESSURE RELIEF DEVICE STANDARDS - PART 3: STATIONARY STORAGE CONTAINERS FOR COMPRESSED GASES
16-10-2023
12-01-2013
1 Introduction
2 Scope and purpose
2.1 Scope
2.2 Purpose
3 Definitions
4 Types of pressure relief devices
5 Application requirements for pressure relief devices
5.1 General
5.2 Piping of pressure relief systems
5.3 Commodity-based requirements
5.4 Jacket relief device
6 Design and construction requirements for pressure
relief devices
6.1 General
6.2 Flow capacities for conditions other than fire
6.3 Flow capacities under fire conditions
6.4 Pressure relief valves
6.5 Nonreclosing devices
6.6 Nonreclosing device in combination with a pressure
relief valve
6.7 Breaking pin devices in combination with a pressure
relief valve
7 Tests of pressure relief devices
7.1 Pressure tests of pressure relief valves
7.2 Flow capacity tests of pressure relief valves
7.3 Test of pressure relief devices other than pressure relief
valves
7.4 Rejected material
8 Identification
9 Maintenance requirements for pressure relief devices
10 References
11 Additional references
Tables
Describes the requirements of various regulations, codes, standards, or specifications applicable to storage containers for compressed gases.
| DocumentType |
Standard
|
| PublisherName |
Compressed Gas Association
|
| Status |
Superseded
|
| SupersededBy |
| 14/30259637 DC : 0 | BS EN ISO 21013-3 - CRYOGENIC VESSELS - PRESSURE-RELIEF ACCESSORIES FOR CRYOGENIC SERVICE - PART 3: SIZING AND CAPACITY DETERMINATION |
| 13/30271407 DC : DRAFT DEC 2013 | BS ISO 16924 - NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES |
| CGA PS 8 : 2004 | CGA POSITION STATEMENT ON THE PROTECTION OF CRYOGENIC STORAGE TANKS FROM OVERPRESSURE DURING OPERATOR-ATTENDED REFILL |
| ISO 21013-2:2007 | Cryogenic vessels Pressure-relief accessories for cryogenic service Part 2: Non-reclosable pressure-relief devices |
| EN ISO 16924:2018 | Natural gas fuelling stations - LNG stations for fuelling vehicles (ISO 16924:2016) |
| CSA HPIT 2-2017 | Dispensing systems and components for fueling hydrogen powered industrial trucks |
| Z276-18 | Liquefied natural gas (LNG) - Production, storage, and handling |
| CGA P 8.9 : 2013 | BULK LIQUID OXYGEN, NITROGEN, AND ARGON STORAGE SYSTEMS AT PRODUCTION SITES |
| UNE-EN ISO 21013-3:2016 | Cryogenic vessels - Pressure-relief accessories for cryogenic service - Part 3: Sizing and capacity determination (ISO 21013-3:2016) |
| CGA M 1 : 2018 | STANDARD FOR MEDICAL GAS SUPPLY SYSTEMS AT HEALTH CARE FACILITIES |
| CGA SB 45 : 2011 | PROPER HANDLING OF INSULATED TANKS THAT ARE IN OBVIOUS SIGNS OF LOSS OF VACUUM |
| NFPA 400 : 2016 | HAZARDOUS MATERIALS CODE |
| BS EN 13648-3:2002 | Cryogenic vessels. Safety devices for protection against excessive pressure Determination of required discharge. Capacity and sizing |
| BS ISO 21013-2 : 2007 | CRYOGENIC VESSELS - PRESSURE-RELIEF ACCESSORIES FOR CRYOGENIC SERVICE - PART 2: NON-RECLOSABLE PRESSURE-RELIEF DEVICES |
| I.S. EN 13648-3:2002 | CRYOGENIC VESSELS - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 3: DETERMINATION OF REQUIRED DISCHARGE - CAPACITY AND SIZING |
| CGA G 6.1 : 2013 | STANDARD FOR INSULATED CARBON DIOXIDE SYSTEMS AT CONSUMER SITES |
| BS ISO 21013-3:2006 | Cryogenic vessels. Pressure-relief accessories for cryogenic service Sizing and capacity determination |
| BS EN ISO 16924:2018 | Natural gas fuelling stations. LNG stations for fuelling vehicles |
| CGA P 75 : 2018 | STANDARD FOR PROPER HANDLING OF INSULATED TANKS THAT ARE IN OBVIOUS SIGNS OF LOSS OF VACUUM |
| NFPA 59A : 2016 | PRODUCTION, STORAGE, AND HANDLING OF LIQUEFIED NATURAL GAS (LNG) |
| NFPA 2 : 2016 | HYDROGEN TECHNOLOGIES CODE |
| NFPA 52 : 2016 | VEHICULAR NATURAL GAS FUEL SYSTEMS CODE |
| NFPA 58 : 2017 | LIQUEFIED PETROLEUM GAS CODE |
| NFPA 1 : 2021 | FIRE CODE |
| I.S. EN ISO 21013-3:2016 | CRYOGENIC VESSELS - PRESSURE-RELIEF ACCESSORIES FOR CRYOGENIC SERVICE - PART 3: SIZING AND CAPACITY DETERMINATION (ISO 21013-3:2016) |
| BS ISO 16924 : 2016 | NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES |
| NFPA 57 : 2002 | LIQUEFIED NATURAL GAS (LNG) VEHICULAR FUEL SYSTEMS CODE |
| NFPA 53 : 2016 | MATERIALS, EQUIPMENT, AND SYSTEMS USED IN OXYGEN-ENRICHED ATMOSPHERES |
| CGA P 66 : 2015 | GUIDELINE FOR THE SELECTION OF PRESSURE RELIEF DEVICES AND VALVE OUTLETS FOR UN MARKED CYLINDERS |
| CGA S 1.1 : 2011 | PRESSURE RELIEF DEVICE STANDARDS - PART 1: CYLINDERS FOR COMPRESSED GASES |
| NFPA 55 : 2016 | COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
| ICC 2012 INTERNATIONAL FIRE CODE : 2012 | INTERNATIONAL FIRE CODE |
| ICC IFGC CODE AND COMMENTARY : 2015 | IFGC® Code and Commentary |
| ICC IFC CODE & COMMENTARY VOLUME 1 & 2 : 2015 | IFC® Code and Commentary |
| ICC 2012 INTERNATIONAL FUEL GAS CODE : 2012 | INTERNATIONAL FUEL GAS CODE |
| NFPA 50B : 1999 | LIQUEFIED HYDROGEN SYSTEMS AT CONSUMER SITES |
| CGA P 12 : 2017 | SAFE HANDLING OF CRYOGENIC LIQUIDS |
| CGA PS 33 : 2008(R2014) | CGA POSITION STATEMENT ON USE OF LPG OR PROPANE TANK AS COMPRESSED HYDROGEN STORAGE |
| NFPA 50 : 2001 | BULK OXYGEN SYSTEMS AT CONSUMER SITES |
| SAE J 2343 : 2018 | RECOMMENDED PRACTICE FOR LNG MEDIUM AND HEAVY-DUTY POWERED VEHICLES |
| I.S. EN ISO 16924:2018 | NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES (ISO 16924:2016) |
| ISO 21013-3:2016 | Cryogenic vessels Pressure-relief accessories for cryogenic service Part 3: Sizing and capacity determination |
| EN 13648-3:2002 | Cryogenic vessels - Safety devices for protection against excessive pressure - Part 3: Determination of required discharge - Capacity and sizing |
| EN ISO 21013-3:2016 | Cryogenic vessels - Pressure-relief accessories for cryogenic service - Part 3: Sizing and capacity determination (ISO 21013-3:2016) |
| CGA S 1.2 : 2009 | PRESSURE RELIEF DEVICE STANDARDS - PART 2: PORTABLE CONTAINERS FOR COMPRESSED GASES |
| ISO 16924:2016 | Natural gas fuelling stations — LNG stations for fuelling vehicles |
| CGA C 14 : 2005(R2010) | PROCEDURES FOR FIRE TESTING OF DOT CYLINDER PRESSURE RELIEF DEVICE SYSTEMS |
| BS EN ISO 21013-3:2016 | Cryogenic vessels. Pressure-relief accessories for cryogenic service Sizing and capacity determination |
| CGA PS 17 : SEP 2004 | CGA POSITION STATEMENT ON UNDERGROUND INSTALLATION OF LIQUID HYDROGEN STORAGE TANKS |
| SAE J 2406 : 2018 | RECOMMENDED PRACTICES FOR CNG POWERED MEDIUM AND HEAVY-DUTY TRUCKS |
| CGA 341 : 2017 | SPECIFICATION FOR INSULATED CARGO TANK FOR NONFLAMMABLE CRYOGENIC LIQUIDS |
| CGA P 8 : 2013 | SAFE PRACTICES GUIDE FOR CRYOGENIC AIR SEPARATION PLANTS |
| CGA V 1 : 2013 | STANDARD FOR COMPRESSED GAS CYLINDER VALVE OUTLET AND INLET CONNECTIONS |
| NFPA 1 : 2018 | FIRE CODE |
| CGA C 14 : 2005(R2010) | PROCEDURES FOR FIRE TESTING OF DOT CYLINDER PRESSURE RELIEF DEVICE SYSTEMS |
| CGA V 1 : 2013 | STANDARD FOR COMPRESSED GAS CYLINDER VALVE OUTLET AND INLET CONNECTIONS |
| CGA P 8 : 2013 | SAFE PRACTICES GUIDE FOR CRYOGENIC AIR SEPARATION PLANTS |
| CGA S 1.2 : 2009 | PRESSURE RELIEF DEVICE STANDARDS - PART 2: PORTABLE CONTAINERS FOR COMPRESSED GASES |
| CGA S 1.1 : 2011 | PRESSURE RELIEF DEVICE STANDARDS - PART 1: CYLINDERS FOR COMPRESSED GASES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.