CSA B140.7.1 : 76(R2001)
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
OIL-FIRED STEAM AND HOT-WATER BOILERS FOR RESIDENTIAL USE
01-03-2005
12-01-2013
Committee on Oil Burning Appliance Standards
Preface
Reference Publications
STANDARD
1 Scope
2 Definitions
3 General Requirements
3.1 Reference Publications
3,2 General
3.3 Oil Burner
3.4 Electrical Equipment
3.5 Controls
3.6 Methods of Assembly and Shipment
3.7 Boilers for Heating Swimming Pool Water
4 Construction
4.1 General
4.2 Accessibility of Parts
4.3 Location of Fuel Lines and Fuel Components
4.4 Casing or Jackets
4.5 Lubrication
4.6 Flue-Gas Passages and Flue Collars
4.7 Draft Regulators
4.8 Primary and Secondary Heating Surfaces
4.9 Observation of the Flame-Zone
4.10 Refractory Materials
4.11 Metal Combustion Chambers
4.12 Flue Baffles and Flame Baffles
4.13 Insulating Materials
4.14 Controls and Fittings
5 Marking
5.1 General
5.2 Installation Clearances
5.3 Field-Mounted Burners
6 Instructions
6.1 General
6.2 Installation Instructions
6.3 Operating Instructions
6.4 Service Manual
7 Tests
7.1 General
7.2 Combustion
7.3 Gross Output
7.4 Limit Control Performance
7.5 Low-Water Cut-Off Control Performance
7.6 Maximum Operation Temperatures
7.7 Other Control Tests
7.8 Voltage
7.9 Flooded Pot Burn-Off (Vaporizing Burners)
7.10 Light-Off
7.11 Seepage
7.12 Power Failure
7.13 Vaporizing Burners
7.14 Atomizing and Wall-Flame Burners
7.15 Proof Test for Steel Boilers
7.16 Bursting Test for Cast Iron Boilers
Appendix A - Codes and Standards
Appendix B - Test Enclosures
Applicable to complete flue-connected, oil-fired steam and/or hot-water low pressure boilers, provided with automatic control devices. Applicable to boilers intended for residential use having an input of less than 3 gallons per hour (US) (approximately 400,000 Btu/h). Applicable to boilers, factory- or field-assembled, which have been, or could have been, completely assembled at the manufacturer's plant and transported in the assembled condition. Also applicable to boilers intended for heating swimming pool water.
| DocumentType |
Standard
|
| PublisherName |
Canadian Standards Association
|
| Status |
Superseded
|
| CSA B140.0 : 2003 : R2013 | OIL-BURNING EQUIPMENT: GENERAL REQUIREMENTS |
| CSA B140.12 : 2003 : R2013 | OIL-BURNING EQUIPMENT: SERVICE WATER HEATERS FOR DOMESTIC HOT WATER, SPACE HEATING, AND SWIMMING POOLS |
| CSA B140.12:2003 | OIL-BURNING EQUIPMENT: SERVICE WATER HEATERS FOR DOMESTIC HOT WATER, SPACE HEATING, AND SWIMMING POOLS |
| CSA B140.0 : 2003 | OIL-BURNING EQUIPMENT: GENERAL REQUIREMENTS |
| CSA B51 : 2014 | BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE |
| CSA B140.1 : 1966 | VAPOURIZING-TYPE OIL BURNERS |
| SAE J1015_201207 | Tonne Kilometer Per Hour Test Procedure |
| CSA B139 : 2015 | INSTALLATION CODE FOR OIL-BURNING EQUIPMENT |
| SAE J 1010 : LATEST | EMISSION CONTROL HOSE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.