CSA B1800 SERIES : 2015
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
THERMOPLASTIC NON-PRESSURE PIPING COMPENDIUM
Hardcopy , PDF
07-10-2019
English, French
01-01-2015
CSA B181.0 - DEFINITIONS, GENERAL
REQUIREMENTS, AND METHODS
OF TESTING FOR THERMOPLASTIC
NONPRESSURE PIPING
CSA B181.1 - ACRYLONITRILE-BUTADIENE-STYRENE
(ABS) DRAIN, WASTE, AND VENT
PIPE AND PIPE FITTINGS
CSA B181.2 - POLYVINYLCHLORIDE (PVC) AND
CHLORINATED POLYVINYLCHLORIDE
(CPVC) DRAIN, WASTE, AND VENT
PIPE AND PIPE FITTINGS
CSA B181.3 - POLYOLEFIN AND POLYVINYLIDENE
FLUORIDE (PVDF) LABORATORY
DRAINAGE SYSTEMS
CSA B181.5 - COEXTRUDED ACRYLONITRILE-BUTADIENE-STYRENE
/POLYVINYLCHLORIDE (ABS/PVC) DRAIN, WASTE,
AND VENT PIPE
CSA B182.1 - PLASTIC DRAIN AND SEWER PIPE
AND PIPE FITTINGS
CSA B182.2 - PSM TYPE POLYVINYLCHLORIDE
(PVC) SEWER PIPE AND FITTINGS
CSA B182.4 - PROFILE POLYVINYLCHLORIDE
(PVC) SEWER PIPE AND FITTINGS
CSA B182.6 - PROFILE POLYETHYLENE (PE)
SEWER PIPE AND FITTINGS FOR
LEAK-PROOF SEWER APPLICATIONS
CSA B182.8 - PROFILE POLYETHYLENE (PE)
STORM SEWER AND DRAINAGE
PIPE AND FITTINGS
CSA B182.11 - STANDARD PRACTICE FOR
THE INSTALLATION OF THERMOPLASTIC
DRAIN, STORM, AND SEWER PIPE
AND FITTINGS
CSA B182.13 - PROFILE POLYPROPYLENE (PP)
SEWER PIPE AND FITTINGS FOR
CSA B182.14/B182.15 - PROFILE STEEL REINFORCED
POLYETHYLENE (SRPE) STORM
SEWER PIPE AND FITTINGS/PROFILE
STEEL REINFORCED POLYETHYLENE
(SRPE) SEWER PIPE AND FITTINGS
Includes CSA B181.0, CSA B181.1, CSA B181.2, CSA B181.3, CSA B181.5, CSA B182.1, CSA B182.2, CSA B182.4, CSA B182.6, CSA B182.8, CSA B182.11, CSA B182.13, CSA B182.14 & CSA B182.15.
| DevelopmentNote |
Supersedes CSA B1800S1. (10/2007) Consists CSA B181.0, CSA B181.1, CSA B181.2, CSA B181.3, CSA B181.5, CSA B182.1, CSA B182.2, CSA B182.4, CSA B182.6, CSA B182.8, CSA B182.11, CSA B182.13, CSA B182.14 & CSA B182.15. (03/2015)
|
| DocumentType |
Standard
|
| Pages |
348
|
| PublisherName |
Canadian Standards Association
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| CSA B45 SERIES : 2002 : R2013 | PLUMBING FIXTURES |
| CSA B602 : 2016 | MECHANICAL COUPLINGS FOR DRAIN, WASTE, AND VENT PIPE AND SEWER PIPE |
| CSA B66 : 2016 | DESIGN, MATERIAL, AND MANUFACTURING REQUIREMENTS FOR PREFABRICATED SEPTIC TANKS AND SEWAGE HOLDING TANKS |
| CSA B45.1 : 2013 | CERAMIC PLUMBING FIXTURES |
| CSA B45.13 : 2014 | VACUUM WASTE-COLLECTION SYSTEMS |
| CSA B45 SERIES :2002 | PLUMBING FIXTURES |
| CSA 2.3 : 2016 | GAS-FIRED CENTRAL FURNACES |
| CAN/CSA-B182.14-12/B182.15-12 | Profile steel reinforced polyethylene (SRPE) storm sewer pipe and fittings/Profile steel reinforced polyethylene (SRPE) sewer pipe and fittings |
| CSA B483.1 : 2007 : R2012 | DRINKING WATER TREATMENT SYSTEMS |
| CSA B483.1 : 2007 : INC : UPD 3 : 2017 : R201200 | DRINKING WATER TREATMENT SYSTEMS |
| CSA B483.1 : 2007 : INC : UPD 2 : 2007 : R2012 | DRINKING WATER TREATMENT SYSTEMS |
| CSA B483.1 : 2007 | DRINKING WATER TREATMENT SYSTEMS |
| CSA B65 : 2012 : R2016 | INSTALLATION CODE FOR DECENTRALIZED WASTEWATER SYSTEMS |
| CSA B483.1 : 2007 : INC : UPD 3 : 2017 : R201700 | DRINKING WATER TREATMENT SYSTEMS |
| CSA B65 : 2012 | INSTALLATION CODE FOR DECENTRALIZED WASTEWATER SYSTEMS |
| CSA B125.2 : 2015 | PLUMBING WASTE FITTINGS |
| (INACTIVE RECORD)CSA B45 SERIES:2002 | PLUMBING FIXTURES |
| CSA Z240 RV SERIES : 2014 | RECREATIONAL VEHICLES |
| ANSI Z21.47 : 2016 | GAS-FIRED CENTRAL FURNACES |
| CSA B79 : 2008 : R2013 | COMMERCIAL AND RESIDENTIAL DRAINS AND CLEANOUTS |
| CAN/CSA-B126 SERIES-13 (R2018) | Water cisterns |
| B79-08 (R2018) | Commercial and residential drains and cleanouts |
| CSA B 79 : 2008 | COMMERCIAL AND RESIDENTIAL DRAINS AND CLEANOUTS |
| CSA Z240 VC SERIES : 2014 | |
| ASME A112.19.2 : 2013 | CERAMIC PLUMBING FIXTURES |
| CSA Z241 SERIES : 2003 : INC : UPD 2 : 2013 : R201300 | PARK MODEL TRAILERS |
| CSA Z241 SERIES : 2003 : INC : UPD 2 : 2013 : R200800 | PARK MODEL TRAILERS |
| ASME A112.18.2 : 2015 | PLUMBING WASTE FITTINGS |
| CSA Z241 SERIES : 2003 | PARK MODEL TRAILERS |
| ASTM D 618 : 2013 : REDLINE | Standard Practice for Conditioning Plastics for Testing |
| ASTM A 1008/A1008M : 2016-09 | SPECIFICATION FOR STEEL, SHEET, COLD-ROLLED, CARBON, STRUCTURAL, HIGH-STRENGTH LOW-ALLOY, HIGH-STRENGTH LOW-ALLOY WITH IMPROVED FORMABILITY, SOLUTION HARDENED, AND BAKE HARDENABLE |
| ASTM F 610/F610M : 2015 : REDLINE | Standard Practice for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique |
| ASTM F 493 : 2014 : REDLINE | Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings |
| CSA B602 : 2016 | MECHANICAL COUPLINGS FOR DRAIN, WASTE, AND VENT PIPE AND SEWER PIPE |
| ASTM D 1149 : 2016-02 | TEST METHODS FOR RUBBER DETERIORATION - CRACKING IN AN OZONE CONTROLLED ENVIRONMENT |
| ASTM D 1414 : 2015 : REDLINE | Standard Test Methods for Rubber O-Rings |
| ASTM D 6147 : 1997 | Test Method for Vulcanized Rubber and Thermoplastic Elastomer-Determination of Force Decay (Stress Relaxation) in Compression |
| ASTM D 3965 : 2016 : REDLINE | Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings |
| ASTM D 2855 : 2015 : REDLINE | Standard Practice for the Two-Step (Primer and Solvent Cement) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets |
| ASTM D 1603 : 2014 : REDLINE | Standard Test Method for Carbon Black Content in Olefin Plastics |
| ASTM D 2444 : 1999 | Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight) |
| ASTM D 2122 : 2016 : REDLINE | Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings |
| ASTM D 648 : 2016 | Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position |
| ASTM D 3350 : 2014 : REDLINE | Standard Specification for Polyethylene Plastics Pipe and Fittings Materials |
| ASTM F 656 : 2015 : REDLINE | Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings |
| ASTM D 695 : 2015 : REDLINE | Standard Test Method for Compressive Properties of Rigid Plastics |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| ASTM D 2990 : 2017 : REDLINE | Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics |
| ASTM D 6992 : 2016 : REDLINE | Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method |
| ASTM D 638 : 2014 : REDLINE | Standard Test Method for Tensile Properties of Plastics |
| ASTM D 1784 : 2011 : REDLINE | Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds |
| ASTM D 746 : 2014 : REDLINE | Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact |
| ASTM D 1693 : 2015 : REDLINE | Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.