CSA B64.10S1-B64.10.1S1 : 2004
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
SUPPLEMENT NO. 1 TO CAN/CSA-B64.10-01/CAN/CSA-B64.10.1-01, MANUAL FOR THE SELECTION AND INSTALLATION OF BACKFLOW PREVENTION DEVICES/MANUAL FOR THE MAINTENANCE AND FIELD TESTING OF BACKFLOW PREVENTION DEVICES
01-07-2007
12-01-2013
Technical Committee on Backflow Preventers and Water Pressure
Reducing Valves
Preface
Foreword
B64.10-01
Manual for the Selection and Installation of Backflow
Prevention Devices
1. Scope
2. Reference Publications, Definitions, Abbreviations, and
Symbols
2.1 Reference Publications
2.2 Definitions
2.3 Abbreviations
2.4 Symbols
3. Backflow Prevention Methods and Devices
3.1 Air Gap
3.2 Barometric Loop
3.3 Mechanical Protection Devices
3.3.1 Available Types
3.3.2 Vacuum Breaker Backflow Preventers - General
3.3.3 Vacuum Breaker, Atmospheric Type (AVB)
3.3.4 Vacuum Breaker, Pressure Type (PVB)
3.3.5 Vacuum Breaker, Hose Connection Type (HCVB)
3.3.6 Backflow Preventer, Dual Check Valve Type with
Atmospheric Port (DCAP)
3.3.7 Backflow Preventer, Reduced Pressure Principle
Type (RP and RPF)
3.3.8 Backflow Preventer, Double Check Valve Type
(DCVA and DCVAF)
3.3.9 Backflow Preventer, Dual Check Valve Type (DuC
and DuCF)
3.3.10 Vacuum Breaker, Laboratory Faucet Type (LFVB)
3.3.11 Backflow Preventer, Dual Check Valve Type with
Intermediate Vent (DuCV)
3.3.12 Backflow Preventer, Single Check Valve Type for
Fire Systems (SCVAF)
3.3.13 Vacuum Breaker, Spill-Resistant Pressure Type
(SRPVB)
4. Selection of Backflow Prevention Devices
4.1 General
4.2 Categories of Hazards
4.3 Principal Ways of Providing Protection
4.3.1 General
4.3.2 Individual Protection
4.3.3 Zone or Area Protection
4.3.4 Premises Isolation
4.4 Selection Guide
4.5 Backflow from Fire Protection Systems
4.6 Backflow from Water Fill Stations
4.7 Backflow from Temporary Water Services
5. Installation of Backflow Prevention Devices
5.1 General Requirements
5.2 Sizing
5.3 Temperature and Pressure Limitations
5.4 Shut-off (Isolating) Valves and Test Cocks
5.5 Strainers
5.6 Location
5.7 Parallel Service
5.8 Spillage
5.9 Thermal Expansion
5.10 Installation Orientation
5.11 Protection from Freezing
Appendices
A - How Backflow Can Occur
B - Guide to the Assessment of Hazard
C - Water-Hauling Equipment and Backflow Devices
D - Conversion Tables
E - Model Backflow Prevention Bylaw
B64.10.1-01
Manual for the Maintenance and Field Testing of Backflow
Prevention Devices
1. Scope
2. Reference Publications, Definitions, and Abbreviations
2.1 Reference Publications
2.2 Definitions
2.3 Abbreviations
3. Devices to Be Field Tested/Frequency
3.1 General
3.1.1 Devices to Be Field Tested and Inspected
3.1.2 Frequency of Field Testing
3.1.3 Field Testing - Reporting
4. Device Testers and School Accreditation
4.1 Certified/Re-certified Backflow Prevention Device
Tester
4.2 School Accreditation
4.3 Tester Licensing/Registration
5. Maintenance
5.1 General
5.2 RP Assemblies
6. Test Gauges/Kits
7. Field Tests Required and Pass/Fail Criteria
7.1 Pressure Vacuum Breaker
7.1.1 Tests Required
7.1.2 Air Inlet Valve
7.1.3 Check Valve
7.1.4 Static Line Pressure
7.2 Reduced Pressure Principle Assembly (RP and RPF)
7.2.1 Tests Required
7.2.2 Differential Pressure Relief Valve Opening Point
7.2.3 Check Valve No. 1
7.2.4 Pass/Fail Criteria
7.2.5 Check Valve No. 2
7.2.6 Static Line Pressure
7.3 Double Check Valve Assembly (DCVA and DCVAF) and Single
Check Valve Assembly (SCVAF)
7.3.1 Tests Required
7.3.2 Check Valve No. 1
7.3.3 Check Valve No. 2
7.3.4 Static Line Pressure
7.4 Field Test for Vacuum Breaker, Hose Connection Dual
Check Type - Manual Field Test of Downstream Check Valve
7.4.1 Test Requirement
7.4.2 Test Set-up
7.4.3 Test Procedure
7.5 Spill-resistant Pressure Type Vacuum Breaker (SRPVB)
7.5.1 Tests Required
7.5.2 Air Inlet Valve
7.5.3 Check Valve
7.5.4 Static Line Pressure
Appendix A - Field Testing Procedures
Provides requirements for the selection and installation of backflow prevention devices.
DevelopmentNote |
This is a supplement to CSA B64.10-B64.10.1. (11/2004)
|
DocumentType |
Standard
|
PublisherName |
Canadian Standards Association
|
Status |
Withdrawn
|
CGSB-24.3 : 1992 | IDENTIFICATION OF PIPING SYSTEMS |
CSA B125 : 2001 | PLUMBING FITTINGS |
ASSE 1060 : 2017 | OUTDOOR ENCLOSURES FOR FLUID CONVEYING COMPONENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.