CSA C22.2 NO. 227.2.1:19

Preface This is the harmonized ANCE, CSA Group, and UL standard for Liquid-Tight Flexible Nonmetallic Conduit . It is the first edition of NMX-J-764-ANCE, the third edition of CSA C22.2 No. 227.2.1 and the sixth edition of UL 1660. This edition of CSA C22.2 No. 227.2.1, supersedes the previous editions published in 1993 and 2014. This edition of UL 1660 supersedes the previous edition published on 2014. This harmonized standard has been jointly revised on January 27, 2023. For this purpose, CSA Group and UL are issuing revision pages dated January 27, 2023, and ANCE is issuing a new edition dated January 27, 2023. This harmonized standard was prepared by the Association of Standardization and Certification, (ANCE), CSA Group and Underwriters Laboratories Inc. (UL). The efforts and support of the Technical Harmonization Committee 23A LFNC Working Group, of the Council on the Harmonization of Electrotechnical Standards of the Nations of the Americas (CANENA), are gratefully acknowledged. This standard is considered suitable for use for conformity assessment within the stated scope of the standard. The present Mexican standard was developed by the CT 23 Electrical Accessories (Wiring Devices) from the Comité de Normalización de la Asociación de Normalización y Certificación, A.C., CONANCE, with the collaboration of the electrical manufacturers and users. This standard was reviewed by the CSA Subcommittee on ICCM01-Nonmetallic Conduit, Tubing and Fittings under the jurisdiction of the CSA Technical Committee on Wiring Products and the CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the Technical Committee. This standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. Scope 1.1 These requirements cover liquid-tight flexible nonmetallic conduit in the 3/8 – 4 (12 – 103) trade sizes of Type LFNC-A (Layered), Type LFNC-B (Integral), and Type LFNC-C (Corrugated) constructions. The conduit is intended for installation in accordance with the National Electrical Code (NEC), the CE Code, Part 1, and the Mexican Electrical Code, NOM-001-SEDE. The values in parentheses are metric trade designators of conduit. 1.2 Conduit covered by this Standard is intended for use in wet, dry, or oily locations at a maximum of 60°C (140°F), unless otherwise marked. (See Section 6.) 1.3 Fittings for liquid-tight flexible nonmetallic conduit are covered in UL 514B, CSA C22.2 No. 18.3, or NMX-J-017-ANCE.

Preface This is the harmonized ANCE, CSA Group, and UL standard for Liquid-Tight Flexible Nonmetallic Conduit . It is the first edition of NMX-J-764-ANCE, the third edition of CSA C22.2 No. 227.2.1 and the sixth edition of UL 1660. This edition of CSA C22.2 No. 227.2.1, supersedes the previous editions published in 1993 and 2014. This edition of UL 1660 supersedes the previous edition published on 2014. This harmonized standard has been jointly revised on January 27, 2023. For this purpose, CSA Group and UL are issuing revision pages dated January 27, 2023, and ANCE is issuing a new edition dated January 27, 2023. This harmonized standard was prepared by the Association of Standardization and Certification, (ANCE), CSA Group and Underwriters Laboratories Inc. (UL). The efforts and support of the Technical Harmonization Committee 23A LFNC Working Group, of the Council on the Harmonization of Electrotechnical Standards of the Nations of the Americas (CANENA), are gratefully acknowledged. This standard is considered suitable for use for conformity assessment within the stated scope of the standard. The present Mexican standard was developed by the CT 23 Electrical Accessories (Wiring Devices) from the Comité de Normalización de la Asociación de Normalización y Certificación, A.C., CONANCE, with the collaboration of the electrical manufacturers and users. This standard was reviewed by the CSA Subcommittee on ICCM01-Nonmetallic Conduit, Tubing and Fittings under the jurisdiction of the CSA Technical Committee on Wiring Products and the CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the Technical Committee. This standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. Scope 1.1 These requirements cover liquid-tight flexible nonmetallic conduit in the 3/8 – 4 (12 – 103) trade sizes of Type LFNC-A (Layered), Type LFNC-B (Integral), and Type LFNC-C (Corrugated) constructions. The conduit is intended for installation in accordance with the National Electrical Code (NEC), the CE Code, Part 1, and the Mexican Electrical Code, NOM-001-SEDE. The values in parentheses are metric trade designators of conduit. 1.2 Conduit covered by this Standard is intended for use in wet, dry, or oily locations at a maximum of 60°C (140°F), unless otherwise marked. (See Section 6.) 1.3 Fittings for liquid-tight flexible nonmetallic conduit are covered in UL 514B, CSA C22.2 No. 18.3, or NMX-J-017-ANCE.