CSA W117.2 : 2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SAFETY IN WELDING, CUTTING, AND ALLIED PROCESSES
Hardcopy , PDF
10-10-2020
English, French
01-01-2017
Preface
1 Scope
2 Reference publications
3 Definitions
4 Welding health and safety program
5 Hazard identification
6 Arc welding and cutting safety
7 Resistance welding safety
8 Robotic welding and cutting systems
9 Gas welding, cutting, and allied gas process safety
10 Laser beam, electron beam, plasma arc, thermite, and
underwater welding and cutting safety
11 Protection of personnel
12 Ventilation
13 Training
14 Program evaluation
Annexes
A (informative) - Welding and allied processes
B (informative) - Protection of personnel - Guidelines
for welding and cutting on containers
C (informative) - Hose connections
D (informative) - Hose pressure drops
E (informative) - Examples of ventilation systems
F (normative) - Marking for individual electrode or flux
packaging
G (informative) - Welding services provided from vehicles
H (informative) - Environmental air emissions (threshold)
reporting
I (informative) - Fire safety plan
J (informative) - Selection of oxygen-fuel gas hose line
safety devices and accessories
K (informative) - Fire and explosion prevention precautions
L (informative) - Providing worker protection when using the
auxiliary power supply from a portable welding machine
M (informative) - Hazard assessment
N (informative) - Air filtration guidelines
O (informative) - Choosing an auto-darkening arc welding
helmet
P (informative) - Bibliography
Specifies minimum requirements and recommendations to protect persons who work in an environment affected by welding, cutting, and allied processes from illness and injury and to prevent damage to property arising from the installation, operation, and maintenance of equipment used in these processes.
DevelopmentNote |
French Edition issued on 01-08-2013. (10/2013)
|
DocumentType |
Standard
|
Pages |
140
|
ProductNote |
Reconfirmed EN
|
PublisherName |
Canadian Standards Association
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
CGA E 5 : 2017 | OXY-FUEL TORCH STANDARD |
CSA Z94.3 : 2015 | EYE AND FACE PROTECTORS |
CGA E 1 : 2016 | STANDARD FOR RUBBER WELDING HOSE AND HOSE CONNECTIONS FOR GAS WELDING, CUTTING, AND ALLIED PROCESSES |
CGA V 1 : 2013 | STANDARD FOR COMPRESSED GAS CYLINDER VALVE OUTLET AND INLET CONNECTIONS |
ASHRAE 52.2 : 2017 | METHOD OF TESTING GENERAL VENTILATION AIR-CLEANING DEVICES FOR REMOVAL EFFICIENCY BY PARTICLE SIZE |
CGA E 2 : 91(R2004) | HOSE LINE CHECK VALVE STANDARDS FOR WELDING AND CUTTING |
AWS F1.2 : 2013 | LABORATORY METHOD FOR MEASURING FUME GENERATION RATES AND TOTAL FUME EMISSION OF WELDING AND ALLIED PROCESSES |
AIHA Z9.7 : 2007 | RECIRCULATION OF AIR FROM INDUSTRIAL PROCESS EXHAUST SYSTEMS |
CSA Z94.2 : 2014 | HEARING PROTECTION DEVICES - PERFORMANCE, SELECTION, CARE, AND USE |
CSA Z275.2 : 2015 | OCCUPATIONAL SAFETY CODE FOR DIVING OPERATIONS |
CSA Z434 : 2014 | INDUSTRIAL ROBOTS AND ROBOT SYSTEMS |
Z275.5-13 (R2018) | Occupational diver training |
NEMA EW 1-1988 (R1994, R1999, R2004) | Electric Arc-Welding Power Sources |
AWS F1.3M : 2006 | A SAMPLING STRATEGY GUIDE FOR EVALUATING CONTAMINANTS IN THE WELDING ENVIRONMENT |
ASHRAE HDBK FUNDAMENTALS : 2013 | ASHRAE HANDBOOK - FUNDAMENTALS |
AWS F3.2M/F3.2 : 2001 | VENTILATION GUIDE FOR WELD FUME |
AWS F3.1 : 1989 | GUIDE FOR WELDING FUME CONTROL |
ANSI Z136.1 : 2014 | SAFE USE OF LASERS |
IEC 60974-1:2017 | Arc welding equipment - Part 1: Welding power sources |
CSA Z460 : 2013 | CONTROL OF HAZARDOUS ENERGY - LOCKOUT AND OTHER METHODS |
CGA E 11 : 2015 | STATIONARY COMPRESSED GAS CYLINDER DISCHARGING MANIFOLDS FOR WORKING PRESSURES UP TO 3000 PSI |
NFPA 55 : 2016 | COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
AWS D3.6M : 2010 | UNDERWATER WELDING CODE |
NFPA 51B : 2014 | FIRE PREVENTION DURING WELDING, CUTTING, AND OTHER HOT WORK |
CGA E 4 : 2016 | STANDARD FOR GAS PRESSURE REGULATORS |
NFPA 51 : 2018 | DESIGN AND INSTALLATION OF OXYGEN-FUEL GAS SYSTEMS FOR WELDING, CUTTING, AND ALLIED PROCESSES |
NFPA 13 : 2016 | INSTALLATION OF SPRINKLER SYSTEMS |
AWS F1.6 : 2003 | GUIDE FOR ESTIMATING WELDING EMISSIONS FOR EPA AND VENTILATION PERMIT REPORTING |
CGA E 17 : 2014 | HOSE LINE QUICK-CONNECT COUPLINGS FOR WELDING, CUTTING, AND ALLIED PROCESSES |
CSA Z1000 : 2014 | OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT |
CSA Z94.1 : 2015 | INDUSTRIAL PROTECTIVE HEADWEAR - PERFORMANCE, SELECTION, CARE, AND USE |
CGA SB 11 : 2009 | USE OF RUBBER WELDING HOSE |
CSA C22.2 No. 107.1 : 2016 | POWER CONVERSION EQUIPMENT |
CGA TB 3 : 2008(R2014) | OXY-FUEL HOSE LINE FLASHBACK ARRESTORS |
C22.2 NO. 182.1-17 | Plugs, receptacles, and cable connectors of the pin and sleeve type (Trinational standard with NMX-J-719-ANCE and UL 1682) |
AWS F4.1 : 2007 | SAFE PRACTICES FOR THE PREPARATION OF CONTAINERS AND PIPING FOR WELDING, CUTTING, AND ALLIED PROCESSES |
CSA Z1006 : 2016 | MANAGEMENT OF WORK IN CONFINED SPACES |
AWS A3.0M/A3.0 : 2010 | STANDARD WELDING TERMS AND DEFINITIONS INCLUDING TERMS FOR ADHESIVE BONDING, BRAZING, SOLDERING, THERMAL CUTTING, AND THERMAL SPRAYING |
ARPM IP7 : 2016 | SPECIFICATIONS FOR RUBBER WELDING HOSE |
AWS C7.1M/C7.1 : 2013 | RECOMMENDED PRACTICES FOR ELECTRON BEAM WELDING AND ALLIED PROCESSES |
CGA SB 20 : 2006(R2013) | GENERAL INFORMATION ON QUICK-CONNECTING COUPLINGS FOR COMPRESSED GAS SERVICE |
ASHRAE HDBK HVAC SYSTEMS & EQUIPMENT : 2012 | ASHRAE HANDBOOK - HVAC SYSTEMS AND EQUIPMENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.