
DD IEC/TS 60695-11-4:2004
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by

Fire hazard testing Test flames. 50 W flame. Apparatus and confirmational test method
Hardcopy , PDF
29-02-2012
English
24-06-2004
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Method A - Production of a standardized nominal 50 W
flame test
4.1 Requirements
4.2 Apparatus and fuel
4.2.1 Burner
4.2.2 Flowmeter
4.2.3 Manometer
4.2.4 Control valve
4.2.5 Copper block
4.2.6 Thermocouple
4.2.7 Temperature/time indicating/recording
devices
4.2.8 Fuel gas
4.2.9 Laboratory fumehood/chamber
4.3 Production of test flame
4.4 Confirmation of the test flame
4.4.1 Principle
4.4.2 Procedure
4.4.3 Verification
5 Method B (withdrawn)
6 Method C (withdrawn)
7 Classification and designation
Annex A (normative) Test arrangements - Method A
Annex B (withdrawn)
Annex C (withdrawn)
Annex D (informative) Recommended arrangements for the use
of the test flame
Annex E (informative) Clearance gauge
Annex F (informative) Test arrangements for tests on equipment
Annex G (informative) Test arrangements for tests on bar test
specimens
Annex H (informative) Access to equipment manufacturers and
suppliers
Bibliography
Provides detailed requirements for the production of a 50 W nominal, pre-mixed type test flame. The approximate overall height is 20 mm.
Committee |
GEL/89
|
DocumentType |
Standard
|
Pages |
28
|
PublisherName |
British Standards Institution
|
RevisionOf | |
Status |
Superseded
|
SupersededBy |
Provides detailed requirements for the production of a 50 W nominal, pre-mixed type test flame. The approximate overall height is 20 mm. The main changes with respect to the previous edition are described below: - The introduction has been revised, - Test methods B and C have been withdrawn. Test method A has been retained with its original letter designation, - Normative reference ISO 1337 has been withdrawn without a replacement by ISO/TC 26. The callout Cu-ETP UNS 11000 is the replacement for all references to ISO 1337. It is taken from ASTM B187-00 and describes high conductivity electrolytic copper, - A new Annex H has been added which provides access to equipment manufacturers and suppliers, - Alignment with other publications in the IEC 60695-11 series has been made, where appropriate Has the status of a basic safety publication in accordance with IEC Guide 104.
Standards | Relationship |
IEC TS 60695-11-4:2004 | Identical |
PD 6686:2006 | Guidance on directives, regulations and standards related to prevention of fire and explosion in the process industries |
IEC 60695-1-30:2017 | Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines |
IEC 60695-1-1:1999 | Fire hazard testing - Part 1-1: Guidance for assessing the fire hazard of electrotechnical products - General guidelines |
IEC 60695-4:2012 | Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products |
ISO 13943:2017 | Fire safety — Vocabulary |
IEC 60695-11-2:2017 | Fire hazard testing - Part 11-2: Test flames - 1 kW pre-mixed flame - Apparatus, confirmatory test arrangement and guidance |
ISO/IEC Guide 51:2014 | Safety aspects — Guidelines for their inclusion in standards |
IEC GUIDE 104:2010 | The preparation of safety publications and the use of basic safety publications and group safety publications |
IEC 60695-11-3:2012 | Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods |
IEC 60584-1:2013 | Thermocouples - Part 1: EMF specifications and tolerances |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.