DEFSTAN 02-130/1(2007) : 2007
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
REQUIREMENTS FOR DECORATIVE LININGS AND COMPOSITE BULKHEADS
Hardcopy , PDF
03-02-2012
English
01-01-2007
Foreword
1 Scope
2 Warning
3 Normative References
4 Abbreviations
5 Materials
5.1 General
5.2 Submarines
5.3 Decorative, High Pressure Laminate (HPL)
5.4 Stainless Steel Systems
5.5 Steel Ceiling Systems
5.6 Grounds
5.7 HPL/Plywood/HPL Composite Linings
5.8 HPL/Aluminium Alloy/HPL Composite Lining
5.9 Quick Release Panels
5.10 Adhesives
6 Location of Linings
7 Emergency Operating Stations (EOS)
8 Installation
Annex A - Normative
Annex B - Statement of Requirements for Quick Release
Lining Panels
B.1 Requirement
Annex C - Adhesives Suitable for Bonding HPL to Wood and
Aluminium Alloy (Surface Ships)
Covers the material and installation requirements for decorative and quick release linings in Surface Ships and Submarines that are to be used in the following spaces: 1) Medical and Dental Organizations, see Def Stan 02-106. Parts 1 to 4; 2) Accommodation, see Def Stan 02-107; 3) WC's, Urinals, Bathrooms and Washing Facilities, see Def Stan 02-120; 4) Galleys and Associated Spaces, see Def Stan 02-121.
| DevelopmentNote |
Supersedes DEFSTAN 02-130(PT1)/1(2000) and DEFSTAN 02-130(PT2)/1(2000). (04/2008)
|
| DocumentType |
Standard
|
| Pages |
20
|
| PublisherName |
UK Ministry of Defence Standards
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| DEFSTAN 02-121(PT2)/3(2010) : 2010 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - PART 2: SPECIFIC REQUIREMENTS FOR HM SURFACE SHIPS |
| DEFSTAN 02-121(PT1)/3(2010) : 2010 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - PART 1: COMMON REQUIREMENTS |
| DEFSTAN 02-106(PT1)/2(2010) : 2010 | REQUIREMENTS FOR MEDICAL & DENTAL ORGANIZATION IN HM SURFACE SHIPS AND SUBMARINES - PART 1: COMMON REQUIREMENTS - MEDICAL & DENTAL FACILITIES |
| DEFSTAN 07-247(PT1)/3(2009) : 2009 | THE SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS - PART 1: SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS |
| DEFSTAN 02-106(PT3)/2(2010) : 2010 | REQUIREMENTS FOR MEDICAL & DENTAL REQUIREMENTS FOR MEDICAL & DENTAL SUBMARINES - PART 3: SPECIFIC REQUIREMENTS - MEDICAL ORGANIZATION FOR ACTION IN HM SURFACE SHIPS |
| DEFSTAN 02-106(PT2)/1(2000) : 2000 | REQUIREMENTS FOR MEDICAL AND DENTAL ORGANIZATION IN HM SURFACE SHIPS AND SUBMARINES - PART 2: SPECIFIC REQUIREMENTS - MEDICAL AND DENTAL FACILITIES IN HM SURFACE SHIPS |
| BS EN 438-5:2016 | High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates |
| BS EN 438-2 : 2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| DEFSTAN 02-121(PT3)/1(2000) : 2000 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - PART 3: SPECIFIC REQUIREMENTS FOR CONVENTIONAL SUBMARINES CATEGORY 2 |
| DEFSTAN 02-106(PT3)/1(2000) : 2000 | REQUIREMENTS FOR MEDICAL AND DENTAL ORGANIZATION IN HM SURFACE SHIPS AND SUBMARINES - PART 3: SPECIFIC REQUIREMENTS - MEDICAL ORGANISATION FOR ACTION IN HM SURFACE SHIPS |
| DEFSTAN 08-160/1(2003) : 2003 | REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - CATEGORY 2 |
| BS EN 438-3:2016 | High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates |
| DEFSTAN 02-106(PT1)/1(2000) : 2000 | REQUIREMENTS FOR MEDICAL AND DENTAL ORGANIZATION IN HM SURFACE SHIPS AND SUBMARINES - PART 1: COMMON REQUIREMENTS - MEDICAL AND DENTAL FACILITIES |
| DEFSTAN 02-713/2(2006) : 2006 | DETERMINATION OF THE TOXICITY INDEX OF THE PRODUCTS OF COMBUSTION FROM SMALL SPECIMENS OF MATERIALS |
| BS EN 438-1:2016 | High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Introduction and general information |
| BS EN 10088-2:2014 | Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| BS EN 485-4:1994 | Aluminium and aluminium alloys. Sheet, strip and plate Tolerances on shape and dimensions for cold-rolled products |
| BS EN 573-1:2004 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Numerical designation system |
| DEFSTAN 02-121(PT2)/2(2006) : 2006 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - PART 2: SPECIFIC REQUIREMENTS FOR HM SURFACE SHIPS |
| DEFSTAN 02-121(PT4)/2(2006) : 2006 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - PART 4: SPECIFIC REQUIREMENTS FOR NUCLEAR SUBMARINES |
| BS EN 573-2:1995 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical symbol based designation system |
| BS 476-6(1989) : 1989 | FIRE TESTS ON BUILDING MATERIALS AND STRUCTURES - PART 6: METHOD OF TEST FOR FIRE PROPAGATION FOR PRODUCTS |
| DEFSTAN 02-120/2(2002) : INTERIM | REQUIREMENTS FOR WATER CLOSETS, URINALS, BATHROOMS AND WASHING FACILITIES IN HM SURFACE SHIPS AND SUBMARINES |
| DEFSTAN 02-107/2(2002) : 2002 | REQUIREMENTS FOR ACCOMMODATION IN HM SURFACE WARSHIPS AND SUBMARINES - CATEGORY 2 |
| BS EN 573-3:2013 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical composition and form of products |
| BS EN 485-3:2003 | Aluminium and aluminium alloys. Sheet, strip and plate Tolerances on dimensions and form for hot-rolled products |
| DEFSTAN 02-106(PT4)/1(2000) : 2000 | REQUIREMENTS FOR MEDICAL AND DENTAL ORGANIZATION IN HM SURFACE SHIPS AND SUBMARINES - PART 4: MEDICAL AND DENTAL FACILITIES IN SUBMARINES |
| BS EN 515:2017 | Aluminium and aluminium alloys. Wrought products. Temper designations |
| DEFSTAN 02-121(PT1)/2(2006) : 2006 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - PART 1: COMMON REQUIREMENTS |
| BS EN 485-2:2013 | Aluminium and aluminium alloys. Sheet, strip and plate Mechanical properties |
| BS 476-12:1991 | Fire tests on building materials and structures Method of test for ignitability of products by direct flame impingement |
| DEFSTAN 07-269/1(2000) : 2000 | PLYWOOD FOR NAVAL REQUIREMENTS - CATEGORY 3 |
| BS EN 485-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| BS EN 438-7:2005 | High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Compact laminate and HPL composite panels for internal and external wall and ceiling finishes |
| BS EN 573-4:2004 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Forms of products |
| DEFSTAN 02-711/2(2006) : 2006 | DETERMINATION OF THE SMOKE INDEX OF THE PRODUCTS OF COMBUSTION FROM SMALL SPECIMENS OF MATERIALS |
| DEFSTAN 07-247(PT1)/2(2006) : 2006 | THE SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS - PART 1: SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.