DEFSTAN 02-155(PT1)/1(2000) : 2000
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
REQUIREMENTS FOR STRUCTURAL PRACTICES IN STEEL SURFACE SHIPS - PART 1: GENERAL REQUIREMENTS
02-11-2015
12-01-2013
TITLE PAGE
SCOPE
FOREWORD
Sponsorship
Conditions of Release
General
MOD Tender or Contract Process
Related Documents
Health and Safety
Warning
CONTENTS
SECTION 1 - DRAWINGS
SECTION 2 - MATERIALS
2.1 Ship Types
2.2 Design Requirements
2.3 Material Requirements
2.4 Hull Plating
2.5 Hull Stiffeners
2.6 Other Structure
2.7 Fabrication of Structural Steels
2.8 Steel Castings
2.9 Steel Forgings
2.10 Cast Iron
2.11 Aluminium and Aluminium Alloys
2.12 Fasteners Used in Aluminium Alloy Joints
2.13 Copper and Copper-Based Alloys
SECTION 3 - GENERAL
3.1 Holes in Structure
3.2 Limber Holes and Air Escape Holes
3.3 Drainage of Tank Tops
3.4 Structure that is Highly Stressed
3.5 Accessibility of Structure for Maintenance
3.6 Miscellaneous Small Tanks
3.7 Lifting Arrangements for Auxiliary Machinery
and Equipment
3.8 Zinc Plated Steel Fasteners
SECTION 4 - SHELL PLATING
4.1 Openings in Shell Plating
SECTION 5 - INNER BOTTOM AND TANK TOPS
5.1 Access Through Inner Bottom
5.2 Drainage in Main Machinery Spaces
5.3 Preservation of Inner Bottom
SECTION 6 - STEM AND STERN
6.1 Stem
6.2 Stern
SECTION 7 - KEEL AND LONGITUDINALS
7.1 Flat Plate Keel
7.2 Vertical Centre Keel
7.3 Holes in Vertical Centre Keel
7.4 Stiffening to Vertical and Flat Keel Plates
7.5 Longitudinals
7.6 Holes in Longitudinals
SECTION 8 - FRAMES AND BULKHEADS
8.1 Holes in Frames
8.2 Bulkheads
8.3 Main Bulkheads
8.4 Load Bearing Bulkheads
8.5 Partition Bulkheads
SECTION 9 - DECKS AND PLATFORMS
9.1 General
9.2 Beams
9.3 Girders and Stiffeners
9.4 Openings in Decks
SECTION 10 - SUPERSTRUCTURES
10.1 Bridges and Deckhouses
10.2 Masts
10.3 Platforms
SECTION 11 - PILLARS
11.1 Pillaring Functions
11.2 Materials
11.3 Siting
11.4 Connections
SECTION 12 - BRACKETS
12.1 Welding
SECTION 13 - REINFORCEMENT
SECTION 14 - WATERTIGHT INTEGRITY
SECTION 15 - PREFABRICATION
15.1 Principles
15.2 Quality of Hull Assembly
15.3 Accuracy of Components
15.4 Stowage of Material and Units
15.5 Lifting Precautions and Fixings
SECTION 16 - WELDING AND RIVETING
16.1 Welding
16.2 Riveting
SECTION 17 - RUDDERS
17.1 Types of Rudders
17.2 Rudder Construction
17.3 Rudder Bearings-General
17.4 Rudder Bearings-Stellite
17.5 Stocks
17.6 Sleeve and Bearing Blanks
17.7 Weld Cladding, Heat Treatment and NDT
17.8 Finishing Operations (Sleeves)
17.9 Procedure A
17.10 Alternative Procedure B
17.11 Finishing Operations (Liners)
17.12 Rudder Bearing Clearances-Stellite
17.13 Rudder Bearings-Non-Stellite
17.14 Rudder Bearing Clearances-Non Stellite
17.15 Lubrication of Bearings
17.16 Rudder Crossheads and Tillers
17.17 Shipping and Unshipping Rudders
SECTION 18 - STABILIZERS
18.1 Fins
18.2 Reinforcement
18.3 Preservation of Stabilizer Fins
SECTION 19 - SHAFT BRACKETS, SHAFT TUBES AND ARRANGEMENTS
FOR UNSHIPPING PROPELLERS
19.1 Shaft Brackets
19.2 Shaft Tubes
19.3 Alignment
19.4 Eddy Plates and Rope Guards
19.5 Shipping and Unshipping the Propellers
SECTION 20 - BILGE KEELS
SECTION 21 - PROPULSION MACHINERY SEATS
21.1 General
21.2 Ships with Double Bottoms
21.3 Ships without Double Bottoms
SECTION 22 - AUXILIARY MACHINERY SEATS
SECTION 23 - BULWARKS AND BREAKWATERS
23.1 Bulwarks
23.2 Breakwaters
SECTION 24 - WEATHERDECK EQUIPMENT
24.1 Hawse Pipes
24.2 Navel Pipes
24.3 Cable Clenches
SECTION 25 - OVERHEAD ARRANGEMENTS FOR HANDLING
EQUIPMENT OR STORES
SECTION 26 - TESTS AND INSPECTIONS
26.1 Water Testing
26.2 Air Testing
26.3 Hose Testing
26.4 Non-Destructive Examination
ANNEX A - RELATED DOCUMENTS
ANNEX B - DEFINITIONS AND ABBREVIATIONS
ANNEX C - PROCUREMENT CHECK LIST
ALPHABETICAL INDEX
Contains the general requirements and practices to be considered when carrying out the planning, preparation of drawings and the structural arrangements of a steel surface ship.
| DevelopmentNote |
This is a redesignation of NES 155 PT1. (01/2001) This standard is obsolescent because it is no longer required for the procurement of new equipment but is retained for maintenance purposes in support of existing in-service equipment. (09/2007)
|
| DocumentType |
Standard
|
| PublisherName |
UK Ministry of Defence Standards
|
| Status |
Withdrawn
|
| Supersedes |
| DEFSTAN 02-718/1(2002) : 2002 | REQUIREMENTS FOR SEWAGE PLANT AND ANCILLARY EQUIPMENT IN HM SURFACE SHIPS AND SUBMARINES |
| DEFSTAN 02-101(PT1)/2(2005) : 2005 | REQUIREMENTS FOR DESIGN AND FITTING OUT OF WORKSHOPS MAINTENANCE SPACES AND ENGINEERING STORES FOR HM SURFACE SHIPS - PART 1: COMMON REQUIREMENTS |
| DEFSTAN 02-102(PT1)/3(2005) : 2005 | REQUIREMENTS FOR AIR-CONDITIONING AND VENTILATION - PART 1: HM SURFACE SHIPS AND ROYAL FLEET AUXILIARIES |
| DEFSTAN 02-728/3(2010) : 2010 | REQUIREMENTS FOR DOMESTIC HOT AND COLD FRESH WATER SYSTEMS |
| DEFSTAN 02-315/3(2005) : 2005 | AIR COMPRESSORS |
| DEFSTAN 02-303/2(2010) : 2010 | LUBRICATION OIL SYSTEMS FOR PROPULSION AND GENERATION IN HM SURFACE SHIPS AND SUBMARINES |
| DEFSTAN 02-316/2(2003) : 2003 | REQUIREMENTS FOR COMPRESSED AIR PURIFICATION EQUIPMENT |
| DEFSTAN 02-303/3(2015) : 2015 | LUBRICATING OIL SYSTEMS FOR PROPULSION AND GENERATION IN HM SURFACE SHIPS & SUBMARINES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.