DEFSTAN 02-155(PT2)/1(2000) : 2000
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
REQUIREMENTS FOR STRUCTURAL PRACTICES IN STEEL SURFACE SHIPS - PART 2: REQUIREMENTS FOR SURVEY AND REPAIR OF STEEL SURFACE SHIPS
02-11-2015
12-01-2013
TITLE PAGE
SCOPE
FOREWORD
Sponsorship
Conditions of Release
General
MOD Tender or Contract Process
Related Documents
Health and Safety
Warning
Personnel-Freshwater Tanks (FOOT)
Tanks, Void Spaces and Compartments
CONTENTS
SECTION 1 - GENERAL
1.1 Doubler Plates
1.2 Insert Plates
1.3 Cathodic Protection
SECTION 2 - SAFETY CERTIFICATION
2.1 Introduction
2.2 Certificate of Safety-Structural Strength (CSSS)
2.3 Professional Officer
SECTION 3 - HULL SURVEY
3.1 Preparation of Survey
3.2 Conduct of Surveys
3.3 Plates, Frames (etc)
3.4 Tanks
3.5 Fuel Tanks
3.6 Fresh Water Tanks
3.7 Galleys, Serveries, Sculleries etc
3.8 Passageways
3.9 Bathrooms
3.10 Watertight Doors, Hatches, Scuttles and
Manhole Covers
3.11 Pipes and Trunks
3.12 Fitted Ballast
3.13 Inlets and Discharges
3.14 Hull Plating
3.15 Rudder and Stabilizer Fins
3.16 Ropeguards and Eddy Plates
3.17 Shaft Brackets
3.18 Weatherdecks
3.19 Machinery Spaces
SECTION 4 - REPORT OF SURVEY
4.1 Drawings and Sketches
4.2 Distribution
4.3 Hull Survey Record Sheets
SECTION 5 - CORROSION
5.1 Description
5.2 Corrosion in a Ship Environment
5.3 Recording Corrosion Defects on Survey Record
Sheets
5.4 Thickness Gauging and NDE of Corroded Structure
5.5 Repair of Primary and Secondary Structure
Corrosion
5.6 Repair of Other Structure
SECTION 6 - CRACKING
6.1 Description
6.2 Repair of Cracks
6.3 Prevention of Further Cracks
SECTION 7 - DEFORMATION
7.1 Description
SECTION 8 - TESTING OF STRUCTURES
ANNEX A - RELATED DOCUMENTS
ANNEX B - ABBREVIATIONS AND DEFINITIONS
ANNEX C - REPORT OF SURVEY-SURFACE SHIPS
ALPHABETICAL INDEX
Contains the survey and repair requirements for steel surface ships and floating docks and the practices to be adopted when carrying out the surveys, repairs, and preparation of safety certification for structural strength of MOD ships and floating docks.
DevelopmentNote |
This is a redesignation of NES 155 PT2. (01/2001) This standard is obsolescent because it is no longer required for the procurement of new equipment but is retained for maintenance purposes in support of existing in-service equipment. (09/2007)
|
DocumentType |
Standard
|
PublisherName |
UK Ministry of Defence Standards
|
Status |
Withdrawn
|
Supersedes |
DEFSTAN 02-316/2(2003) : 2003 | REQUIREMENTS FOR COMPRESSED AIR PURIFICATION EQUIPMENT |
NES 113 PT 9 : ISSUE 2 | REQUIREMENTS FOR MECHANICAL HANDLING - JACKS |
NES 745 PT 1 : ISSUE 1 | CLASSIFICATION, INSPECTION REQUIREMENTS AND ACCEPTANCE STANDARDS FOR CASTING - COPPER AND NICKEL ALLOY CASTINGS |
NES 704 PT 1 : ISSUE 3 | REQUIREMENTS FOR CATHODIC PROTECTION - COMMON REQUIREMENTS |
NES 706 : ISSUE 2 AMD 6 | WELDING AND FABRICATION OF SHIP STRUCTURE |
NES 147 : ISSUE 3 AMD 1 | THE REQUIREMENTS FOR BUILDING ACCURACY DURING CONSTRUCTION OF SURFACE SHIPS |
NES 704 PT 2 : ISSUE 4 | REQUIREMENTS FOR CATHODIC PROTECTION - IMPRESSED CURRENT CATHODIC PROTECTION SYSTEM |
NES 113 PT10 : ISSUE 1 | REQUIREMENTS FOR MECHANICAL HANDLING - NON-TRAVERSING HAND OPERATED CHAIN BLOCKS AND THEIR ASSOCIATED NON-GEARED OVERHEAD RUNWAY TROLLEYS |
NES 113 PT 1 : ISSUE 2 | REQUIREMENTS FOR MECHANICAL HANDLING - BASIC PRINCIPLES OF DESIGN |
NES 113 PT 6 : ISSUE 2 | REQUIREMENTS FOR MECHANICAL HANDLING - WINCHES, REELS & WINDLASSES |
NES 729 PT 5 : ISSUE 1 | REQUIREMENTS FOR NON-DESTRUCTIVE EXAMINATION METHODS - ULTRASONIC |
NES 773 : ISSUE 1 AMD 2 | WELDS - MINIMUM ACCEPTANCE STANDARD |
NES 113 PT 7 : ISSUE 3 | REQUIREMENTS FOR MECHANICAL HANDLING - LEVER HOISTS |
NES 113 PT 3 : ISSUE 2 | REQUIREMENTS FOR MECHANICAL HANDLING - ANCHOR CAPSTANS, CAPSTANS AND CABLE HOLDERS |
NES 113 PT 4 : ISSUE 2 | REQUIREMENTS FOR MECHANICAL HANDLING - LIFTS |
NES 711 : ISSUE 2 | DETERMINATION OF THE SMOKE INDEX OF THE PRODUCTS OF COMBUSTION FROM SMALL SPECIMENS OF MATERIALS |
NES 704 PT 4 : ISSUE 3 AMD 1 | REQUIREMENTS FOR CATHODIC PROTECTION - SHIPS FITTING OUT, SHIPS IN REFIT OR LAID-UP |
NES 761 : ISSUE 3 | PREPARATION AND PAINTING OF FUEL AND HYDRAULIC OIL TANKS |
NES 113 PT 2 : ISSUE 2 | REQUIREMENTS FOR MECHANICAL HANDLING - FIXED CRANES AND GANTRIES - DESIGN PARAMETERS |
NES 745 PT 2 : ISSUE 1 | CLASSIFICATION, INSPECTION REQUIREMENTS AND ACCEPTANCE STANDARDS FOR CASTING - STEEL CASTINGS |
NES 154 : ISSUE 1 AMD 1 | DESIGN STANDARDS FOR SURFACE SHIPS STRUCTURES |
NES 155 PT 1 : ISSUE 2 AMD 2 | REQUIREMENTS FOR STRUCTURAL PRACTICES IN STEEL SURFACE SHIPS - GENERAL REQUIREMENTS |
NES 765 : ISSUE 2 | REQUIREMENTS FOR PAINTING OF MACHINERY COMPARTMENTS IN STEEL HULLED SURFACE SHIPS |
NES 113 PT 5 : ISSUE 2 | REQUIREMENTS FOR MECHANICAL HANDLING - ROLLER CONVEYORS |
NES 704 PT 3 : ISSUE 4 AMD 2 | REQUIREMENTS FOR CATHODIC PROTECTION - SACRIFICIAL ANODE OR SELF ENERGIZED SYSTEM |
NES 850 : ISSUE 1 AMD 1 | REQUIREMENTS FOR THE DRY DOCKING SLIPPING OR LIFTING OF MOD VESSELS |
NES 113 PT11 : ISSUE 1 | REQUIREMENTS FOR MECHANICAL HANDLING - PULLEY BLOCKS AND SNATCH BLOCKS (NON-GEARED) |
NES 763 : ISSUE 3 | PRESERVATION AND PAINTING OF COMPARTMENTS IN SURFACE SHIPS |
NES 113 PT 8 : ISSUE 2 | REQUIREMENTS FOR MECHANICAL HANDLING - DAVITS & DERRICKS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.