DEFSTAN 02-862(PT1)/3(2011) : 2011
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
NAVAL FASTENERS - PART 1: MATERIAL SELECTION AND USE
Hardcopy , PDF
25-09-2016
English
01-01-2011
Foreword
1 Scope
2 Warning
3 Normative References
4 Terms and Definitions
5 Abbreviations
6 General Guidance on Use of Fasteners
7 Material Selection
8 Corrosion-related experience with fasteners on
HM Ships and Submarines
Annex A - Fastener Standards
Annex B - Tightening Fasteners
Annex C - Mechanisms of Corrosion
Annex D - Material Datasheets
Annex E - Corrosion Data Sources
Provides guidance (and sets requirements where appropriate) for the selection and use of fasteners on HM Ships and Submarines.
DevelopmentNote |
Supersedes DEFSTAN 02-862(PT1)/2(2007), DEFSTAN 02-862(PT4)/2(2007) and DEFSTAN 02-862(PT5)/2(2007). (08/2011) This standard is obsolescent because it is no longer required for procurement of new equipment but is retained for maintenance purposes in support of existing in-service equipment. (09/2016)
|
DocumentType |
Standard
|
Pages |
88
|
PublisherName |
UK Ministry of Defence Standards
|
Status |
Withdrawn
|
Supersedes |
DEFSTAN 02-123(PT1)/3(2015) : 2015 | REQUIREMENTS FOR LAUNDRIES AND ASSOCIATED COMPARTMENTS - PART 1: LAUNDRIES AND ASSOCIATED COMPARTMENTS |
DEFSTAN 08-107/3(2013) : 2013 | GENERAL REQUIREMENTS FOR THE DESIGN OF ELECTROTECHNICAL AND NAVAL WEAPON EQUIPMENT |
DEFSTAN 02-330/3(2013) : 2013 | REQUIREMENTS FOR MAIN PROPULSION PLANT CONDENSERS IN NUCLEAR POWERED SUBMARINES |
DEFSTAN 02-121(PT1)/4(2017) : 2017 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES (CATEGORY 2) - PART 1: COMMON REQUIREMENTS |
DEFSTAN 02-329/4(2015) : 2015 | REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES |
DEFSTAN 02-320/4(2015) : 2015 | REQUIREMENTS FOR THE DESIGN AND INSTALLATION OF FUEL SYSTEMS FOR GAS TURBINE ENGINES AND DIESEL ENGINES IN HM SURFACE SHIPS AND SUBMARINES |
DEFSTAN 02-795/2(2016) : 2016 | REQUIREMENTS FOR HEALTH PHYSICS LABORATORIES AND RADIATION FACILITIES IN NUCLEAR SUBMARINES |
DEFSTAN 02-303/3(2015) : 2015 | LUBRICATING OIL SYSTEMS FOR PROPULSION AND GENERATION IN HM SURFACE SHIPS & SUBMARINES |
DEFSTAN 02-748/4(2017) : 2017 | REQUIREMENTS FOR STRAINERS IN HM SURFACE SHIPS AND SUBMARINES |
BS EN ISO 10642 : 2004 | HEXAGON SOCKET COUNTERSUNK HEAD SCREWS |
BS 3643-1:2007 | ISO metric screw threads Principles and basic data |
BS EN ISO 4762:2004 | Hexagon socket head cap screws |
BS EN ISO 4029:2003 | Hexagon socket set screws with cup point |
DEFSTAN 03-11/5(2008) : 2008 | PHOSPHATE TREATMENT OF IRON AND STEEL |
BS 3073:1977 | Specification for nickel and nickel alloys: strip |
BS 57:1951 | Specification. B.A. screws bolts and nuts |
BS EN ISO 4027:2003 | Hexagon socket set screws with cone point |
SAE AMS5662N | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50AI - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated, Precipitation-Hardenable |
ASTM B 348 : 2013 : REDLINE | Standard Specification for Titanium and Titanium Alloy Bars and Billets |
BS EN ISO 7042:2012 | Prevailing torque type all-metal hexagon high nuts. Property classes 5, 8, 10 and 12 |
BS 7752-2:1994 | Free running type wire thread inserts Specification for ISO metric fine pitch threads |
PD 6494:1980 | Mismatch of screw thread systems |
DEFSTAN 02-834(PT2)/1(2000) : 2000 | REQUIREMENTS FOR ALUMINIUM SILICON BRONZE - PART 2: FORGINGS, FORGING STOCK, RODS AND SECTIONS |
BS EN ISO 2082:2017 | Metallic and other inorganic coatings. Electroplated coatings of cadmium with supplementary treatments on iron or steel |
BS EN ISO 4026:2003 | Hexagon socket set screws with flat point |
BS 3580:1964 | Guide to design considerations on the strength of screw threads |
DEFSTAN 02-835/1(2000) : 2000 | REQUIREMENTS FOR HIGH STRENGTH COPPER NICKEL MANGANESE ALLOY FORGINGS, FORGING STOCK RODS AND SECTIONS |
BS EN 12473:2014 | General principles of cathodic protection in seawater |
BS 1769:1951 | Specification. Unified black hexagon bolts, screws, nuts (UNC & UNF threads). Heavy series |
BS 4439:1969 | Specification for screwed studs for general purposes. Metric series |
BS 4463:1969 | Specification for crinkle washers for general engineering purposes. Metric series |
BS EN ISO 2081:2008 | Metallic and other inorganic coatings. Electroplated coatings of zinc with supplementary treatments on iron or steel |
BS 3409-1:1961 | Specification for the tapping of holes to receive wire thread inserts (UNC and UNF threads) Diameters ¼ in and over |
BS 4929-2:1973 | Specification for steel hexagon prevailing-torque type nuts Unified (inch) series |
DEFSTAN 02-136/3(2010) : 2010 | DESIGN POLICY, PRINCIPLES, TESTING AND ACCEPTANCE REQUIREMENTS FOR WATERTIGHT INTEGRITY OF SUBMARINES |
BS EN ISO 1479:2011 | Hexagon head tapping screws |
BS EN ISO 7049:2011 | Cross-recessed pan head tapping screws |
BS EN ISO 4028:2003 | Hexagon socket set screws with dog point |
BS 2TA 2:1973 | Specification for sheet and strip of commercially pure titanium (tensile strength 390-540 N/mm<sup>2</sup>) |
DEFSTAN 02-833(PT2)/2(2007) : 2007 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE - PART 2: FORGINGS, FORGING STOCK, RODS AND SECTIONS |
BS EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread |
BS 4183:1967 | Specification for machine screws and machine screw nuts. Metric series |
BS EN ISO 7380:2004 | Hexagon socket button head screws |
BS EN 10302:2008 | Creep resisting steels, nickel and cobalt alloys |
BS EN 20273:1992 | Fasteners. Clearance holes for bolts and screws |
BS 1580-1:2007 | Unified screw threads Screw threads with diameters ¼ in and larger. Requirements |
BS EN ISO 2320:2015 | Fasteners. Prevailing torque steel nuts. Functional properties |
BS EN ISO 1580:2011 | Slotted pan head screws. Product grade A |
BS 7751-1:1994 | Prevailing torque type wire thread inserts Specification for ISO metric coarse pitch threads |
BS EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Bolts, screws and studs |
BS 2693-1:1956 | Specification for screwed studs General purpose studs |
BS EN ISO 7045:2011 | Pan head screws with type H or type Z cross recess. Product grade A |
BS 3409-2:1966 | Specification for the tapping of holes to receive wire thread inserts (UNC and UNF threads) Diameters below ¼ in |
DEFSTAN 02-834(PT1)/1(2000) : 2000 | REQUIREMENTS FOR ALUMINIUM SILICON BRONZE - PART 1: SHEET, STRIP AND PLATE |
DEFSTAN 03-25/5(2008) : 2008 | SULFURIC ACID ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS |
BS 7752-1(1994) : 1994 | FREE RUNNING TYPE WIRE THREAD INSERTS - PART 1: SPECIFICATION FOR ISO METRIC COARSE PITCH THREADS |
BS 4464:1969 | Specification for spring washers for general engineering and automobile purposes. Metric series |
BS 7751-2:1994 | Prevailing torque type wire thread inserts Specification for ISO metric fine pitch threads |
ISO 15589-2:2012 | Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines |
BS EN ISO 7719:2012 | Prevailing torque type all-metal hexagon regular nuts. Property classes 5, 8 and 10 |
BS 3692:2001 | ISO metric precision hexagon bolts, screws and nuts. Specification |
PD 6484:1979 | Commentary on corrosion at bimetallic contacts and its alleviation |
BS EN ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Nuts |
BS 2470:1973 | Specification for hexagon socket screws and wrench keys. Inch series |
BS 3076:1989 | Specification for nickel and nickel alloys: bar |
BS 7371-12:2008 | Coatings on metal fasteners Requirements for imperial fasteners |
BS 2TA 3:1973 | SPECIFICATION FOR BAR AND SECTION FOR MACHINING OF COMMERCIALLY PURE TITANIUM (TENSILE STRENGTH 390-540 N/MM[2]) |
BS 3410:1961 | Specification for metal washers for general engineering purposes |
BS EN 12373-1:2001 | Aluminium and aluminium alloys. Anodizing Method for specifying decorative and protective anodic oxidation coatings on aluminium |
BS EN 1515-1:2000 | Flanges and their joints. Bolting Selection of bolting |
BS 4320:1968 | Specification for metal washers for general engineering purposes. Metric series |
DEFSTAN 03-20/3(2005) : 2005 | ELECTRO-DEPOSITION OF ZINC |
DEFSTAN 03-19/4(2010) : 2010 | ELECTRO-DEPOSITION OF CADMIUM |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.