|
BS EN 12020-2:2016
|
Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 Tolerances on dimensions and form |
|
DEFSTAN 83-48/4(2003) : 2003
|
CLOTHS, PLAIN WEAVE, COTTON |
|
DEFSTAN 02-853(PT1)/1(2000) : 2000
|
REQUIREMENTS FOR THE IDENTIFICATION, COLOUR CODING AND MARKING FOR SYSTEMS - PART 1: SURFACE SHIPS CATEGORY 2 |
|
BS EN 438-5:2016
|
High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates |
|
BS 5651:1989
|
Method for cleansing and wetting procedures for use in the assessment of the effect of cleansing and wetting on the flammability of textile fabrics and fabric assemblies |
|
BS EN 14118-1:2003
|
Reinforcement. Specifications for textile glass mats (chopped strand and continuous filament mats) Designation |
|
DEFSTAN 02-784/3(2007) : 2007
|
REQUIREMENTS FOR SAFETY SIGNS AND COLOURS |
|
BS EN 438-2 : 2016
|
HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
|
BS EN 755-4:2008
|
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Square bars, tolerances on dimensions and form |
|
BS EN 755-8:2016
|
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Porthole tubes, tolerances on dimensions and form |
|
BS EN 1773:1997
|
Textiles. Fabrics. Determination of width and length |
|
DEFSTAN 02-833(PT2)/3(2011) : 2011
|
REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE - PART 2: FORGINGS, FORGING STOCK, RODS AND SECTIONS |
|
BS EN ISO 12945-1:2001
|
Textiles. Determination of fabric propensity to surface fuzzing and to pilling Pilling box method |
|
BS EN ISO 105-E04:2013
|
Textiles. Tests for colour fastness Colour fastness to perspiration |
|
BS EN 10048:1997
|
Hot rolled narrow steel strip. Tolerances on dimensions and shape |
|
DEFSTAN 08-160/1(2003) : 2003
|
REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - CATEGORY 2 |
|
BS EN 438-3:2016
|
High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates |
|
BS EN ISO 105-B02:2014
|
Textiles. Tests for colour fastness Colour fastness to artificial light: Xenon arc fading lamp test |
|
BS EN 14118-3:2003
|
Reinforcement. Specifications for textile glass mats (chopped strand and continuous filament mats) Specific requirements |
|
BS EN 14976:2005
|
Textiles. Mattress tickings. Specification and test methods |
|
BS EN 14465:2003
|
Textiles. Upholstery fabrics. Specification and methods of test |
|
BS EN ISO 4589-3:2017
|
Plastics. Determination of burning behaviour by oxygen index Elevated-temperature test |
|
BS EN ISO 105-X12:2016
|
Textiles. Tests for colour fastness Colour fastness to rubbing |
|
BS EN 25077:1994
|
Textiles. Determination of dimensional change in washing and drying |
|
BS EN 61340-5-1:2016
|
Electrostatics Protection of electronic devices from electrostatic phenomena. General requirements |
|
DEFSTAN 81-41(PT1)/7(2013) : 2013
|
PACKAGING OF DEFENCE MATERIEL - PART 1: INTRODUCTION TO DEFENCE PACKAGING REQUIREMENTS |
|
BS EN 755-7:2016
|
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Seamless tubes, tolerances on dimensions and form |
|
BS EN 1600:1997
|
Welding consumables. Covered electrodes for manual metal arc welding of stainless and heat resisting steels. Classification |
|
BS EN 438-1:2016
|
High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Introduction and general information |
|
BS EN 10088-2:2014
|
Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
|
BS EN 485-4:1994
|
Aluminium and aluminium alloys. Sheet, strip and plate Tolerances on shape and dimensions for cold-rolled products |
|
BS EN 573-1:2004
|
Aluminium and aluminium alloys. Chemical composition and form of wrought products Numerical designation system |
|
BS 5852:2006
|
Methods of test for assessment of the ignitability of upholstered seating by smouldering and flaming ignition sources |
|
BS EN ISO 9445:2006
|
Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths. Tolerances on dimensions and form |
|
BS EN ISO 13937-3:2000
|
Textiles. Tear properties of fabrics Determination of tear force of wing-shaped test specimens (single tear method) |
|
BS EN 10250-4:2000
|
Open steel die forgings for general engineering purposes Stainless steels |
|
BS EN 10051:2010
|
Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels. Tolerances on dimensions and shape |
|
DEFSTAN 07-247(PT1)/3(2009) : 2009
|
THE SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS - PART 1: SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS |
|
BS EN 14118-2:2003
|
Reinforcement. Specifications for textile glass mats (chopped strand and continuous filament mats) Methods of test and general requirements |
|
BS EN ISO 105-D02:1996
|
Textiles. Tests for colour fastness Colour fastness to rubbing: Organic solvents |
|
DEFSTAN 02-711/3(2012) : 2012
|
DETERMINATION OF THE SMOKE INDEX OF THE PRODUCTS OF COMBUSTION FROM SMALL SPECIMENS OF MATERIALS |
|
BS EN 573-2:1995
|
Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical symbol based designation system |
|
BS 3878:1982
|
Specification for flexible PVC sheeting for hospital use |
|
BS EN 10130:2006
|
Cold rolled low carbon steel flat products for cold forming. Technical delivery conditions |
|
BS 476-6(1989) : 1989
|
FIRE TESTS ON BUILDING MATERIALS AND STRUCTURES - PART 6: METHOD OF TEST FOR FIRE PROPAGATION FOR PRODUCTS |
|
BS EN 10087:1999
|
Free cutting steels. Technical delivery conditions for semi-finished products, hot rolled bars and rods |
|
BS EN 755-6:2008
|
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Hexagonal bars, tolerances on dimensions and form |
|
DEFSTAN 02-188/1(2000) : 2000
|
REQUIREMENTS FOR THE PROCUREMENT, STORAGE AND USE OF TIMBER |
|
DEFSTAN 02-120/2(2002) : INTERIM
|
REQUIREMENTS FOR WATER CLOSETS, URINALS, BATHROOMS AND WASHING FACILITIES IN HM SURFACE SHIPS AND SUBMARINES |
|
DEFSTAN 02-184/1(2000) : 2000
|
REQUIREMENTS FOR MASTER DECOR SCHEME OF ACCOMMODATION AREAS IN SURFACE SHIPS AND SUBMARINES |
|
BS EN 755-9:2016
|
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Profiles, tolerances on dimensions and form |
|
BS EN 12844 : 1999
|
ZINC AND ZINC ALLOYS - CASTINGS - SPECIFICATIONS |
|
BS EN ISO 7599:2010
|
Anodizing of aluminium and its alloys. General specifications for anodic oxidation coatings on aluminium |
|
BS 1449-1.1:1991
|
Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip General specification |
|
BS 5438:1989
|
Methods of test for flammability of textile fabrics when subjected to a small igniting flame applied to the face or bottom edge of vertically oriented specimens |
|
BS EN 12590:2000
|
Textiles. Industrial sewing threads made wholly or partly form synthetic fibres |
|
BS EN ISO 12947-2:2016
|
Textiles. Determination of the abrasion resistance of fabrics by the Martindale method Determination of specimen breakdown |
|
BS EN ISO 13936-3:2007
|
Textiles. Determination of the slippage resistance of yarns at a seam in woven fabrics Needle clamp method |
|
BS EN 573-3:2013
|
Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical composition and form of products |
|
BS EN 485-3:2003
|
Aluminium and aluminium alloys. Sheet, strip and plate Tolerances on dimensions and form for hot-rolled products |
|
BS EN 1982:2017
|
Copper and copper alloys. Ingots and castings |
|
BS EN ISO 3582:2001
|
Flexible cellular polymeric materials. Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame |
|
BS EN ISO 6330:2012
|
Textiles. Domestic washing and drying procedures for textile testing |
|
BS EN ISO 4589-2:2017
|
Plastics. Determination of burning behaviour by oxygen index Ambient-temperature test |
|
BS 3379(2005) : 2005
|
COMBUSTION MODIFIED FLEXIBLE POLYURETHANE CELLULAR MATERIALS FOR LOADBEARING APPLICATIONS - SPECIFICATION |
|
BS EN 755-3:2008
|
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Round bars, tolerances on dimensions and form |
|
BS EN 515:2017
|
Aluminium and aluminium alloys. Wrought products. Temper designations |
|
BS EN 485-2:2013
|
Aluminium and aluminium alloys. Sheet, strip and plate Mechanical properties |
|
BS 1155:2003
|
Natural rubber compounds for extrusion. Specification |
|
BS EN 755-2:2016
|
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Mechanical properties |
|
BS EN 12329:2000
|
Corrosion protection of metals. Electrodeposited coatings of zinc with supplementary treatment on iron or steel |
|
BS 476-12:1991
|
Fire tests on building materials and structures Method of test for ignitability of products by direct flame impingement |
|
BS EN ISO 105-C06:2010
|
Textiles. Tests for colour fastness Colour fastness to domestic and commercial laundering |
|
BS EN 12540:2000
|
Corrosion protection of metals. Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium |
|
BS 1425-1:1991
|
Cleanliness of fillings and stuffings for bedding, upholstery and other domestic articles Specification for fillings and stuffings other than feather and/or down |
|
DEFSTAN 07-269/1(2000) : 2000
|
PLYWOOD FOR NAVAL REQUIREMENTS - CATEGORY 3 |
|
BS EN 485-1 : 2008
|
ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
|
BS EN 438-7:2005
|
High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Compact laminate and HPL composite panels for internal and external wall and ceiling finishes |
|
DEFSTAN 02-713/3(2012) : 2012
|
DETERMINATION OF THE TOXICITY INDEX OF THE PRODUCTS OF COMBUSTION FROM SMALL SPECIMENS OF MATERIALS |
|
DEFSTAN 08-204(PT3)/1(2010) : 2010
|
REQUIREMENTS FOR DAMAGE CONTROL AND FIRE PROTECTION FOR THE SAFETY OF HM SURFACE SHIPS AND SUBMARINES - PART 3: HM SURFACE SHIPS AND SUBMARINE EQUIPMENT |
|
BS 1625-6 & 4830(1972) : 1972
|
SPECIFICATIONS FOR WOVEN COTTON TAPES, LIGHT, MEDIUM AND HEAVY QUALITIES |
|
BS 4881:1993
|
Specification for polypropylene film cords, lines and twines |
|
BS EN ISO 13934-1:2013
|
Textiles. Tensile properties of fabrics Determination of maximum force and elongation at maximum force using the strip method |
|
BS EN 13780:2003
|
Touch and close fasteners. Determination of longitudinal shear strength |