DEFSTAN 22-92/1(2006) : 2006

Foreword
1 Scope
2 Warning
3 Normative References
4 Definitions
  4.1 Receiving Ship
  4.2 Original Defence Standard
  4.3 Mandatory Clauses in Defence Standards
5 Abbreviations and Definitions
6 Performance Specification
  6.1 Manufacturer's Tests
7 Standards/Requirements
  7.1 Manufacture
       7.1.1 Quality
       7.1.2 Quality Approval
       7.1.3 Method
       7.1.4 Construction of 225 metre Reelable Refuelling
              Hose
       7.1.5 Hose Marking
       7.1.6 Dimensions and Tolerances
              7.1.6.1 Length of Assembly
              7.1.6.2 Bore
              7.1.6.3 Outside Diameter
              7.1.6.4 Concentricity
              7.1.6.5 Weight
  7.2 Installation On-Board Ships
       7.2.1 Installation on Receiving Ships
       7.2.2 Hose Service Life
       7.2.3 Acceptance of Hoses
       7.2.4 Stowage On-Board
       7.2.5 Maintenance
       7.2.6 Periodic Testing
  7.3 Storage and Issue
       7.3.1 Hose Stowage Life
  7.4 Identification and Packing
  7.5 Oils and Greases
       7.5.1 Responsibility for Inspection
8 Design Requirements/Guidance
  8.1 Materials
       8.1.1 Lining
       8.1.2 Reinforcement
       8.1.3 Bonding Wire
       8.1.4 Cover
  8.2 Couplings and Split Clamps
  8.3 Production Test and Inspection
       8.3.1 Visual Inspection
       8.3.2 Batch Test
       8.3.3 Acceptance Standard
Annex A - Testing and Test Report Requirements
  A.1 Manufacturer's Testing
  A.2 Rubber Properties Material Tests
  A.3 Adhesion Test
  A.4 Crush Test
  A.5 Bend Radius Test
  A.6 Bend Test
  A.7 Low-Temperature Flexibility Test
  A.8 Hydrostatic Tests
  A.9 Proof Pressure and Axial Rotation Test
  A.10 Electrical Continuity Tests
  A.11 Burst Test
  A.12 Elongation and Neckdown Tests
  A.13 Tensile Pull
  A.14 Test on the Hose Inclusive of the Area of the Splice
  A.15 Coupling Tests
       A.15.1 Tensile Pull
       A.15.2 High Pressure Hold Test
       A.15.3 Proof Test
       A.15.4 Coupling to Coupling Test for Split Clamp
              Assemblies
  A.16 Manufacturer's Test Report Requirements
Annex B - Visible Defects in Synthetic Rubber Hose
  B.1 Introduction
Annex C - Hose Identification Panel
Annex D - Bend Test
  D.1 Sample
  D.2 Method
  D.3 Requirement
Annex E - Low-Temperature Flexibility Test
  E.1 Method
Annex F - Method of Measuring the Free Length of a Hose

Specifies the detail required for the materials, manufacture, type testing and packaging of 153 mm bore reelable rubber hose and its associated couplings to be used in the replenishment at sea of Dieso (NATO F-76 to DEF STAN 91-4), from RFA FORT GEORGE, FORT VICTORIA, WAVE KNIGHT and WAVE RULER using the astern reel method.